Used Mori Seiki Horizontal Machining Center Sh50 for sale (71,567)

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM Dcsdpfx Aozgrzkei Sen 20-tool changer Coolant pressure: 20 bar Renishaw

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 The machine is currently powered and available for immediate delivery. • P8 power supply, valued at 1500, was renewed in August 2024. • The spindle was repaired in 2017 and has since been used primarily in a single-shift operation, as we mainly produce individual parts and small series. Therefore, the machine has spent most of its time in setup mode. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm * 500mm) Dedpfx Aeyt Nnpji Sjcn • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring during pallet changes is likely damaged, resulting in oil leakage. We have temporarily resolved this by inserting a ball valve in between. We only need to open this when we change the pallets, which doesn't happen very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being switched off for an extended period. The procedure for restoring it is known. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Continuous B-axis Axis travels: X900, Y800, Z980 Dcedpfxsz Ea Dhe Ai Ssn 180-position tool magazine Tool breakage detection in the magazine Dust extraction system FMS Fastems linear 10-pallet system (5+5) 2 loading stations

Condition: ready for operation (used), Year of construction: 2005, operating hours: 3,648 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 625 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm B-axis swivel range: 360° B-axis resolution: 0.001° B-axis speed: 100 rpm Spindle speed: 50–10,000 rpm Spindle power: 24 / 37 kW Spindle torque: 250 / 350 Nm Spindle operating hours: 3,648 h Tool interface: HSK-A63 according to DIN 69893 Number of pallets: 2 Pallet size: 500 × 400 mm Pallet load capacity: 400 kg Dcjdpfoz Izc Rjx Ai Sjn Pallet change time: 8 / 5 s T-slots: according to DIN 55201 Magazine capacity: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent slots: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Max. total weight of tools: 200 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D Coolant tank volume: approx. 1,100 l Coolant pressure: 50 bar Dimensions & Weight Dimensions (L x W): 5,800 x 4,800 mm Machine weight: 12,800 kg Total automatic operation: 32,099 h Total operating hours: 20,326 h Spindle hours: 3,648 h EQUIPMENT Pallet changer Chain magazine with 60 tool positions Knoll coolant unit with filter fleece Emulsion cooling inside and outside Renishaw measuring probe Tool breakage monitoring in the magazine Chip conveyor Sound enclosure Paper band filter Rinsing gun at the setup station Closed work area enclosure according to UVV Pallet sequence operation Network connection Ethernet interface Technical documentation Layout plan

Condition: ready for operation (used), Year of construction: 2015, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Dsdszu Tryopfx Ai Secn Number of positions in tool changer: 60 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant: Yes

Condition: excellent (used), Year of construction: 2011, operating hours: 5,203 h, functionality: fully functional, MORI SEIKI NH5000 DCG MACHINE DATA Manufacturer: MORI SEIKI Dcodpfx Aisz Abwts Son Model: NH5000 DCG Year of Manufacture: 2011 Control System: FANUC 31iA / MAPPS Program Runtime: Only 5,203 hours TECHNICAL DATA Travel in X/Y/Z: 730 × 730 × 850 mm Spindle Speed: Up to 14,000 rpm Spindle Taper: HSK-A63 Automatic Tool Changer: 60 positions Feed Rate: 50 m/min Rapid Traverse: 50 m/min B-axis Indexing: 360° Pallets: Two Pallet Size: 500 × 500 mm Max. Workpiece Dimensions: Ø800 × 1,000 mm Internal Coolant: 680 liters Chip Conveyor: Included in the scope of supply The machine is sold as a complete production unit, including tooling. Excellent, like-new condition Immediately available Inspection and test run possible

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Dedey S T D Tspfx Ai Sscn Year: 1990

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 500 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC MSX 501 WORKING CAPABILITIES: X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm B-axis rotation: 360° Dedpfx Aioz H I A Ue Sscn Rapid traverse speed X, Y, Z: 50 m/min TABLE: Number of pallets: 2 Table dimensions: 500 x 500 mm Maximum workpiece dimensions: Ø 800 x 1,000 mm Table load capacity: 500 kg SPINDLE: Tool holder taper: ISO 50 Maximum spindle speed: 8,000 rpm Machine configuration: •120-tool magazine •Spindle connection DIN 69871 ISO 50 •High-pressure system through the spindle, 70 bar, complete with tank and paper filter •Chip evacuator •Operating manuals and CE declaration Year of manufacture: 2004

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Djdpfxexq Hcko Ai Sscn Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm Dcodpsz I Dy Ssfx Ai Sen max. workpiece weight 600 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² feed power 10 kN total power requirement 67 kW weight of the machine ca. 9,7 t dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: used, Year of construction: 2006, MORI SEIKI NV-5000 α 1A/40 4-AXIS MACHINING CENTER YEAR 2006 MODEL NV-5000α1A/40 CNC MSX-501 (MAPPS-M conversational) FEATURES 1. WORK AREA AND TRAVEL • X-axis travel: 800 mm • Y-axis travel: 510 mm • Z-axis travel: 510 mm • Distance between table surface and spindle nose: 150 - 660 mm 2. TABLE • Table size: 1,100 x 600 mm • Maximum load capacity: 1,000 kg • Configuration: 6 x 18 mm T-slots 3. SPINDLE • Spindle speed: 14,000 rpm • Spindle mount: MAS BT-40 (7/24 Taper No. 40) • Bearing inner diameter: 65 mm • Motor power (30 min/duty): 22 / 18.5 kW • Cooling: Chiller for spindle cooling included Dedpez Dv T Njfx Ai Sscn 4. FEED RATES AND ACCURACY • Rapid traverse rates: 42,000 mm/min • Jog feed rate: 0 - 1,260 mm/min • Positioning accuracy: 0.005 mm (over the entire travel) • Positioning repeatability: ± 0.001 mm 5. AUTOMATIC TOOL CHANGER (ATC) • Tool magazine capacity: 30 positions • Tool holder type: MAS BT-40 (90° pull stud) • Maximum tool diameter: 80 mm (125 mm with adjacent positions empty) • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Tool change time (chip-to-chip): 2.6 seconds (1.0 s from tool to tool) 6. CNC FEATURES (Mori Seiki MSX-501) • Monitor: 10.4" TFT color active matrix • Program memory: 320 m (63 programs can be stored) • Main functions: o LOOK-AHEAD (G08) for high-speed 2D profile control o Synchronous tapping (Rigid Tapping) o Helical interpolation o Load Monitor (cutting force management) o RS-232-C and PCMCIA interface standard 7. DIMENSIONS, WEIGHTS AND CONSUMPTIONS • Machine height: 2,603 mm • Installation area: 2,788 x 2,710 mm • Machine weight: 6,960 kg • Installed electrical power: 50.5 kVA • Coolant tank capacity: 275 liters 8. EQUIPMENT AND INCLUDED ACCESSORIES • Chip conveyor: Left-side conveyor • Coolant system: Coolant interface through the spindle (Type-B) with additional high-pressure pump (50 Atm) and dual filter • Cleaning system: Pneumatic • Signaling: Light and sound indicator for cycle end • Transformer: Included (380V/50Hz > 200V/60Hz) Machine complete with manuals, test certificates and CE declaration All technical data provided is indicative and may be subject to change without prior notice and therefore should not be considered binding.

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply Djdpfx Ajxqp Ivei Sscn - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: used, Year of construction: 2006, operating hours: 28,491 h, machine/vehicle number: 309, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table load: 5,000 kg, overall weight: 28,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 29,840 h, coolant supply: 70 bar, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI 100 A Year of manufacture: 2006 120-tool magazine, BT 50 Knoll high-pressure system, 2000 liters, 70 bar Chip conveyor Djdpfxez Iyauo Ai Sscn Pallets, 1000x1000 mm NC table, 0.001° Linear scales in all axes Spindle speed: 6000 rpm Can be inspected while in operation.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Dedjzcuyiopfx Ai Sjcn Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Dcsdpfx Ajwbi Adsi Sen Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: used, Year of construction: 2009, operating hours: 25,000 h, functionality: fully functional, Control system: MSX-701 IV (based on Fanuc) Spindle hours: approx. 18,400 Work area & travel ranges Travel range X/Y/Z: 560/560/630 mm Dcsdpozxrawofx Ai Sen Pallet size: 400 × 400 mm Max. workpiece dimensions (D × H): Ø 630 mm × 900 mm Max. pallet load: 400 kg B-axis (table indexing): 1° (standard) or 0.001° full NC (DDM option) Main spindle & drives Spindle speed (standard): 14,000 rpm Tool holder: SK-40 and BT-40 Spindle power (30 min / continuous): 18.5 kW / 11 kW Max. spindle torque: 120 Nm Rapid traverse rate (X / Y / Z): 50 m/min Max. feed rate: 50 m/min Number of tool positions in the magazine: 120 Max. tool weight / length: 8 kg / 400 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system Djdpoykpg Hsfx Ai Sjcn META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB Dcedpfxewi Ibuj Ai Son - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: good (used), Year of construction: 1999, Machine is used, in good condition. Parts shown by hand not come. Dcodpfjz Arlzox Ai Sen

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller manufacturer: Siemens, controller model: Sinumerik 804D, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX 4000 with 2-pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Dsdoyghq Ajpfx Ai Secn Program run hours: 21,000 h Technical data: Spindle speed: 10 – 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Tool holder: HSK 63 Magazine positions: 60 – ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Equipment: 2-pallet changer Coolant system for through-spindle coolant (IKZ) 70 bar Chip conveyor Renishaw 3D probe

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Dcodjxfka Nopfx Ai Ssn Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X mm: 730 Y mm: 730 Z mm: 850 Dcsdpfx Aisythprs Son B mm: 0.001 Pallet dimension mm: 500 x 500 Number of pallets: 2 Table load capacity Kg: 500 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm - Tool changer type: Chain type Positions in changer: 120 Max. tool diameter: mm 70 Max. tool diameter with adjacent positions empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l.: 760 Coolant through spindle: Yes Equipment Chip extractor Rigid tapping Manuals, electrical diagrams, etc.

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Dcsdpjwxygzofx Ai Ssn Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg Dcsdpjy D E Syjfx Ai Sjn CNC Control : Fanuc Oi-MC

Condition: excellent (used), Year of construction: 2007, Quaser MK603HPD horizontal machining center, 2-pallets Year: 2007 Technical details: Work range Pallet size (mm) 500 x 500 Max. work swing diameter (mm) Ø680 Max. work piece height 710 Table load capacity (kg) 500 Travel X / Y / Z (mm) 710 / 610 / 610 B-axis minimum indexing (degree) 0.001 Table surface to spindle center (mm) 105 ~ 715 Position accuracy With Linear encoder X/Y/Z (mm) 0.004 Tool changer Tool selection Random Magazine positions 60 Max. tool diameter w/o adjacent tool (mm) Ø80 (Ø150) Max. tool length (mm) 350 Max. tool weight (kg) 10 Tool to tool time (sec.) 1.5 Chip to chip time (sec.) 4.9 Pallet changer Number of pallet 2 Method of pallet changer Swing Arm type Pallet change time (sec.) 8 Pallet changing repeatability (mm) 0.008 Control Fanuc 18iM-B Main spindle 15000 rpm , direct coupling SKF Heavy duty & high speed Coolant system Coolant tank capacity (Liter) 580 (200+380) - Nozzle coolant pump capacity 60 L/min - Through spindle coolant pump capacity 25 L/min. , 20 bar - Wash down pump capacity 60 L/min. - Celling wash down pump capacity 60 L/min. Machine size Height (mm) 3100 Floor space W x D (mm) 3675 x 4510 Weight (kg) 13000 Accessories/options: - Spindle oil chiller - 60 position tool magazine - 2 pallet station - Linear encoder (Absolute 0.0001mm) - Coolant system - 20 bar through spindle coolant - Celling wash down coolant - Base, Saddle wash down coolant - Coolant wash gun - Chip augers (2 sets) Dsdpfozf Rp Rex Ai Socn - Chip conveyor - Work light - Machine status light - CE & EMC Tool holders and clamping plates which shows on the pictures are not including.