Used Ms-Maschinenbau Hns-90 for sale (14,095)

Condition: new, Year of construction: 2026, - 200mm cutting height - 750mm cutting width - 5-30m/min steppless feed - 90 KW Sawing Motor Fgsdpfx Apjca Hawe Dsh - 3KW Feed gearbox - 75mm Sawarbor

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Fjdpfx Aoynpc Nop Dogh Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Fsdpfxexbn A Ts Ap Degh Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: good (used), Year of construction: 2019, Edging thickness 0.4-3 mm / 5 mm Jointing unit Glue pot Pressure unit End trimming station Milling station Scraper blade Flat scraper blade Fedpey El Eisfx Ap Djgh Workpiece thickness 8-50 mm Workpiece width min. 75 mm Workpiece length min. 120 mm Total length approx. 2940 mm + magazine plate overhang Exact equipment upon request The data was taken from a technical data sheet; therefore, accuracy cannot be guaranteed.

Condition: excellent (used), Year of construction: 1994, machine/vehicle number: 99684 - 20204, functionality: fully functional, power: 110 kW (149.56 HP), type of input current: AC, workpiece height (max.): 3,000 mm, total width: 1,800 mm, overall weight: 35,000 kg, year of last overhaul: 2010, workpiece weight (max.): 35,000 kg, Portata: 100 metri cubi / Ora Fgjdpfju Auflsx Ap Djh OTTIME CONDIZIONI – mascelle da sostituire

Condition: used, Year of construction: 1980, TUBE BENDING MACHINE LANG TYPE EL90 Fodpforq D N Rex Ap Dogh Φ 90

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Fsdpow I U Drefx Ap Dogh Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers Fgsdpfx Apsxqd Nno Dsh • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: excellent (used), Year of construction: 2015, Adhesive application machine, HH Maschinenbau Type TH 300 Year of manufacture: 2015 Fjdpfx Ajz I Rcgep Djgh

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Fjdpovdcc Rofx Ap Dsgh Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Fodpoz Nia Ujfx Ap Degh - weight: 800KG Made in Germany The pictures show you an older machine

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 23.30 E91D-A003, input voltage: 230 V, total length: 1,25,000 mm, total height: 2,500 mm, total width: 1,25,000 mm, • Automated sorting and palletizing system with robotics • Robot-assisted sorting, packaging, and palletizing system • Flexible sorting and packaging system with delta and palletizing robots • Automated packaging and palletizing system • Intelligent sorting and palletizing solution with robotic systems • Fully automatic sorting, packaging, and palletizing system • Robot-assisted packaging and palletizing system • Automated packaging line with delta robots and palletizing robot • Modular sorting and packaging system for packaging • Highly automated sorting, packaging, and palletizing system Automated sorting and palletizing system with robotics For sale is an automated sorting and palletizing system for processing and packaging various products. The system is equipped with two delta robots for product handling and sorting, an industrial palletizing robot, and a case sealer for automatically closing the packages. After sorting, the products are automatically grouped into packages, case sealed, and then palletized. The system is suitable for high throughput rates and can be adapted to different products and packaging concepts. The modular design allows individual stations to be expanded or integrated into existing production lines. Fgjdpfxez Df Aaj Ap Deh Equipment: • 2 × Delta robots for pick-and-place and sorting • 1 × Industrial palletizing robot • Automatic case sealer • Conveyor technology and system control • Suitable for semi-automatic and fully automatic operation The system is in good condition and can be inspected by arrangement. Further technical information, documentation, and images are available upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Fedpfez Agv Uox Ap Djgh - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Fgsdsz Agw Espfx Ap Djh - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm Fgedsz Ag Rropfx Ap Djh - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Fedpfx Apozz Rpcs Djgh - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Unloader - Sheet Pile Stacker Schneider Maschinenbau AG 1058 Ablader - Unloader - Sheet Pile Stacker Schneider Maschinenbau AG 1058 Year 1990 - Serial-No. 633-1217 Fodsz H Az Sspfx Ap Dsgh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Fgjdpfezw D Hajx Ap Doh Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Year of construction: 2024, condition: new, - 4 separation steps - log length on request - log diameter on request - Discharge height on request - 5,5 KW SEW gear motor - R127 SEW gearbox Fgjdjpfaubepfx Ap Deh

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Fodpopfcgajfx Ap Degh Optional - Disposal conveyor belts

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm Fsdpju Rpibsfx Ap Degh - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 9 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Fsdpfx Apexpilxj Dogh Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay Fjdpfx Apjzr Ircs Dogh • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor Fgedpfx Apjful Uij Deh - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Fsdpfx Apszwac Re Degh Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.