Edgebander

Lange Maschinenbau B 90 K

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers Hodpfswka S Isx Aa Seff - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Hedpfxjrl Utbs Aa Ssff Max Panel Length: 55 mm

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Hedpfx Aasd Dhwns Sjff Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Hedpfjw I U E Ajx Aa Soff Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Hfjdpfx Aekw H Ekja Sjf Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Hfodpfxouhm Ade Aa Sjf Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine SCM - Model: Olimpic K360 T-ER1 - Very good condition. - Immediately available - Video on request Hodpsyrr Naofx Aa Soff - Year of manufacture: 2016 - High-end configuration (2 extra glue pots)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Hedpfjdh Tfgex Aa Soff Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: used, Year of construction: 2000, functionality: fully functional, table length: 810 mm, table width: 975 mm, SECOND-HAND BAND RE-SAWING MACHINE MEBER MOD. SR900 Hjdsx Rt Aaspfx Aa Seff - Table dimensions mm. 975x810 - Motor Kw 11 - Year 2000 (CE)

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Hsdpew I U Drofx Aa Seff Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim