Used Mwh Pit Jack 2X 5000 Kg for sale (67,392)

Condition: good (used), Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack Nwsdpjikrpuefx Aqveg -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Nsdpfx Asndn Agoqvswg Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Nwodpfxedtq Anj Aqveg Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: good (used), Year of construction: 2021, operating hours: 7,173 h, load capacity: 5,000 kg, empty load weight: 1,400 kg, mileage: 7,173 km, This electric tractor from the STILL brand is from 2021 and is in good condition; The tractor has a capacity of 5,000 kg; The Lithium battery WITHOUT charger Watch the video on YouTube Nsdowcnp Sjpfx Aqvswg

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height 1700 mm weight Nedpfjrg A N Nex Aqvswg 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2011, color: other, VERY GOOD AND SAFE FORKLIFT | SIGMA SERT. FEBR 2026| NEW FORKS. | VERY HIGH MAST| CUSSION TIRES . Nedpfx Aewnfrbjqvjwg

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, 2x used steam boiler installation Fabricate: VIESSMANN Type: M237 026 Year: 2005 Steamcapacity: 2.300 kg/h Max. pressure: 10 bar CE 0035 Nodpfx Asy Tpm Hjqvswg Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator. Available as single boiler or package deal.

Condition: new, functionality: fully functional, Year of construction: 2022, total height: 5,050 mm, total length: 5,000 mm, load capacity: 500 kg, throat depth: 4,000 mm, working height: 4,000 mm, Equipment: documentation/manual, Unused column-mounted slewing crane. Jib length: 400 cm. Overall height: 505 cm. Load capacity: 500 kg. Swivels 270 degrees. Wire rope operated trolley with smooth-running carriage. Everything included, including bolts and chemical anchors for concrete floors. The crane just needs to be assembled and is ready for immediate use. Completely unused, year of manufacture 2022, but never unpacked. CE documents etc. available. Transport can be arranged. Other sizes of column-mounted slewing cranes available: 500 kg, 600 cm jib length, 750 cm height. 1200 kg, 500 cm jib length, 750 cm height. 1600 kg, 500 cm jib length, approx. 700 cm height. Njdoy Ecp Eopfx Aqvswg

Condition: excellent (used), load capacity: 5,000 kg, IMG 5-ton Double Column Lifting and Rotating Device with 3rd Axis Multifunctionality Njdpfoxxx Dvsx Aqvswg Extreme travel distance Tilting moment 6,500 Nm Rotary disc torque 1,200 Nm; rotation speed approx. 2 rpm Total load capacity 6,000 kg There are 4 versions: - Mono: single column lifting and rotating device - Duo: double column lifting and rotating device - Duo: double column lifting and rotating device with 5.5 m cross beam for bolting - Duo: double column lifting and rotating device with cross beam for bolting and additional 3rd rotary axis with 5-ton load capacity With EC Declaration of Conformity User manual and technical documentation available Optional: foot switch and cable remote control, as well as speed regulation on request

Condition: used, Year of construction: 2014, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Nodpsymx Tbefx Aqvswg

Condition: excellent (used), Year of construction: 2008, operating hours: 12,100 h, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, color: yellow, BAUMANN sideloader Year of manufacture: 2008 12,100 operating hours Fork spread adjustment New tires Lifting height: 4.5 meters Maximum load capacity: 5,000 kg Cevoman bv. Lenskensdijk 5 2200 Herentals Nwodpeywk Adefx Aqvjg Belgium

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block Nsdpfx Aqow Tincovowg -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

Condition: used, Year of construction: 2023, Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg Nodpfxoucaimj Aqvswg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Overall dimensions: 4725 / 2000 / H2420 mm -Total weight: 2000 kg

Condition: good (used), Spur gear pulley, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, hand trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley, under-flange trolley -Load capacity: 5000 kg -Hub travel: 4.0 m -Dimensions: 500/400/H800 mm Nwodpfx Aofwg Hueqveg -Weight: 165 kg

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane Nsdpfjiuh I Aex Aqvswg 5000 kg with a load center of 600 mm Telescopic length on the hook: 3600 mm with a payload of 950 kg See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Nwedpfxoxpui Ne Aqvog Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: used, machine/vehicle number: FN1242U, FN1243U, 2x Single-girder suspension crane 6.800mm x 1.600 kg Njdpsq D Afgjfx Aqvswg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Nwjdpjng Exaofx Aqvog Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Nedpoxxvqajfx Aqvowg

Condition: excellent (used), Year of construction: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Maximum roll width 1500 mm Load capacity 5000 kg Njdsmv Hv Aspfx Aqvowg Inner diameter 360 - 630 mm Outer diameter 1100 mm With 4-arm spindle Double bearing decoiler with handbrake and steel wheels for movement

Year of construction: 1991, condition: as good as new (ex-display), machine/vehicle number: Mü0136, Technical data: 1 Demag KBK column slewing crane NL 2x 250KG with 2 booms Payload at full radius 2x 250KG / 0.25ton payload Height: approx. 4.23m, UK boom: approx. 3.75 + 3.2m Nodpfx Aqsqmillovewg Projection: approx. 2+3m, hook height: approx. 3.3m + 2.75m Weight completely approx. 700 KG with 2x 250Kg Demag PK chain hoist with floor control Connection to 400V 16A, swivel range 2x 270° Crane is dismantled and packed on a pallet Good condition, see pictures Location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Nsdpsyba Rwjfx Aqvswg

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred Nodpfx Aov A Rr Doqvowg

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Base plate of the prop 40x40cm Nwsdpfjr Igruox Aqvsg Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2004, total length: 13,750 mm, total width: 2,550 mm, wheelbase: 9,710 mm, color: other, Year of construction: 2004, Equipment: ABS, tail-lift, = Additional options and accessories = - Air horn - BPW-Assen - Sunroof = Remarks = Broshuis 3A D-45, 2004, BPW axles, Sliding roof, 9000 kg Dhollandia tail lift, 15000 kg Liftable middle deck, No sales within the Benelux! = More information = Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 15.030 kg Carrying capacity: 26.970 kg GVW: 42.000 kg Functional Tail lift: Dhollandia, tail lift, 9000 kg Sliding roof: Yes Maintenance APK (MOT): tested until 11/2026 Identification Nwedpfx Ajy T Rbxoqvjg Registration number: OH-40-NZ = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.