Used Myjka Automatyczna Summa for sale (28)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MClL-800?OSK+KK, input voltage: 400 V, type of input current: three-phase, type of cooling: air, total width: 2,330 mm, total length: 2,150 mm, total height: 2,800 mm, sheet thickness aluminum (max.): 2 mm, continuous operating pressure: 0.5 bar, table length: 1,150 mm, Equipment: hot water, type plate available, Industrial rotary spray washer with fume extractor and ion exchange station. Designed for washing steel, aluminum, non-ferrous metal elements with a maximum load of 250 kg and dimensions of 1000x800 mm. Technical documentation and completed swewis are available for the station. More information at the phone number. Bdsdpfxownbh Es Af Aoh

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Bjdpef Aaalefx Af Aedh Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Bdjdpfx Afsfzq Sts Ajh Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. Bdsdezwdv Uspfx Af Aoh We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: excellent (used), MOSCA RO-M-P2 – automatic PP strapping machine For sale: a high-quality, automatic polypropylene (PP) strapping machine from the renowned German manufacturer, MOSCA. This device is designed for the quick and efficient strapping of cartons, packages, and other products prepared for transport and storage. Bdedszkmp Depfx Af Ash The machine is ideally suited for use in warehouses, logistics centers, manufacturing companies, online stores, and packaging facilities. Technical specifications: Manufacturer: MOSCA Maschinenfabrik Gerd Mosca GmbH Model: RO-M-P2 Year of manufacture: 2000 Serial number: 58664 Country of manufacture: Germany Power supply: 230 V Frequency: 50 Hz Power: 0.5 kW Rated current: 2.4 A Control voltage: 24 V DC Equipment: Automatic PP strapping Strap tension adjustment Automatic strap sealing Control panel with indicators Main switch Large stainless steel worktable Mobile design with wheels Robust industrial construction Condition: Used machine. Technically functional. Good visual condition, with normal signs of wear and tear from use. Sold in the exact condition as shown in the photos.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder Bodpfxoy Sapvs Af Ajdh - Integrated camera - ADC Control module left + right INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Rotating pallet table Stretch film holder Bodpfjzf Rkuox Af Aedh Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used.

Condition: used, Year of construction: 2022, functionality: fully functional, Largest Flatbed Cutter SUMMA F3232, year 2022 for sale! Availability in January 2027. Materials that work with the F3232: Textiles & soft signage, Wide-format banners & mesh, Vinyl & protective films, Large-format corrugated & carton, Industrial composites & synthetics, Wood & MDF, Foam, rubber & technical materials. Working area: 327 × 320 cm Dimensions: 422 × 422 × 122 cm Material width: up to 332 cm Vacuum: 2 × 2.2 kW (50 Hz) Vacuum zones: 14 (2 rows × 7 columns) Speed: up to 1000 mm/s Acceleration: up to 1 G Bedpfxezuvzdo Af Ajdh Power requirements: 3 × 400 V + N, 50 Hz, max 20 A INCLUDED (the machine comes with): ✓ Vacuum system ✓ Conveyor system ✓ Integrated Safety System ✓ Optical Camera System ✓ ADC Tool Calibration (Right + Left) ✓ GoProduce ✓ GoProduce Pro Pack ✓ GoProduce Upgrade License Not included: Tangential module 2 pcs., Pneumatic Oscillating Tool - POT, Router module.

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Bsdpfx Afozyyfko Asdh Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! Bdodpfx Afezb Akto Aeh A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), A Summa roll cutter from a textile factory is available. Pinch rollers: 4, media width range: 170mm-1450mm, maximum cutting width: 1350mm, media thickness range: 0.05mm-0.25mm, maximum tool force: 600g, perforation force: 250g, axis speed: 1m/s, resolution: 0.025mm. Machine dimensions X/Y/Z: approx. 2050mm/700mm/1150mm, weight: approx. 100kg. The machine has minor damage to the housing. Documentation available. An on-site inspection is possible. Bedpfx Afezqu Etj Aodh

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Bdodewty H Depfx Af Aoh Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), For sale: stainless steel washer / water rinsing machine, previously used for processing green beans, with a working length of 4 meters, width 1.9 meters, and a height of approximately 3 meters. Bjdpfx Aswzwzbjf Ajdh

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Bodpfx Afsflmdwj Asdh - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2490214, total length: 4,800 mm, total width: 2,550 mm, total height: 2,750 mm, overall weight: 2,500 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available, For sale: BIG-BOX MBB-30 Chemaxpol chamber washing machine – 2014 | Fully operational | Free delivery included Bdodpfxozqtd Ij Af Aoh I am offering for sale a BIG-BOX MBB-30 chamber washing machine manufactured by Chemaxpol, year of production 2014. The machine is in fully working order, ready for use and has been regularly maintained. It is ideal for washing Big-Box containers and other components requiring thorough cleaning in the food, agricultural, and processing industries. Specifications: • Manufacturer: Chemaxpol • Model: BIG-BOX MBB-30 • Year of production: 2014 • Condition: Used, fully operational • Complete technical and operating documentation (DTR) included.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 821301-10002, Equipment / Additional information: Hardware • OptiPrint™ media cleaner • Powered roll feed system with media flanges • Powered roll up system with media flanges • Baskets • Rear and Front Media sensor • Hard-Disk (2 GB job storage space) Interface • 8-key control panel. • 4x20-character liquid crystal display. • English Display language. • Metric or English units. Functionality • 16 user configurations. • Auto Alignment system. • Up to eight colors/job • OptiTrac Ribbon save • Right side of band • OptiTrac colors : Mirror silver and Gold Cutting: • Concatenation and curve smoothing to obtain better cut quality. • OptiCut drag-movement optimization. • Overcut for easy weeding. • Multiple reprint feature (up to 999). • Flash Eproms Bdodpfx Afjhu Saws Aoh With 5 cassettes and various color ribbons Operation manual

Condition: good (used), Year of construction: 2011, Automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Bdjdpfx Aswylikef Aeh

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell Bdedpfx Asfz I D Dsf Aeh The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, functionality: fully functional, SummaSign Pro D1010 Cutting plotter Bodjrzbp Repfx Af Aodh Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2014, Glass grinder BOVONE ELB 10-45 BEVELING MACHINE - BOVONE ELB 10-45 - GLASS THICKNESS UP TO 60 mm - WASHER + Brush ----- TECHNICAL DATA Speed: 0,35-5,4 m/min Bodpfoulac Hjx Af Ajdh Glass thickness: 2-30 mm OPTION 60 mm Bevel: 0-45° Bevels: 5 mm max Min. glass dimension: 12 mm thick edge 65 x 65 mm bevel 22.5° 85 x 85 mm bevel 45° 105 x 105 mm Gr. 30 mm edge 80 x 80 mm bevel 22.5° 100 x 100 mm bevel 45° 140 x 140 mm Installed power: 31.5 kW Weight: 4950 kg Height of working panel: 920 mm Dimensions: length: 8200 mm width: 1200 mm H: 2900 mm Voltage: 24 V

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Piła Kaltenbach Kaltenbach KBR 371 NA/ABG rocznik 2004 sterowna numerycznie CNC Sterownie: Siemens Piła w pełni automatyczna z podajnikiem materiału dwustanowiskowym. Bdodpfx Afewqr Ube Aeh Podajnik materiału z magazynem w pełni automatycznym. W pełni sprawna w bardzo dobrej kondycji -serwisowana.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Bodpfx Ajfz Dvvof Asdh User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz Bdedpfx Afeypd Szs Aeh • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Year of construction: 2020, condition: new, PLC microprocessor control Bodpfx Afofz Dvce Aodh • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Bsdoflpmqjpfx Af Asdh Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.