Used Niles N30 Lt 3500 for sale (6,077)

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Hodpfxjx Hvvuj Acbefg Turning diameter 720 mm Some technical details are shown on photos. Machine is located in Germany.

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Hedpfx Acox Ik Twsbjfg Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Hedpsx I Simofx Acbofg Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Hfsdpswwaruefx Acbsg Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Hfodpewbuyzefx Acbsg

Condition: good (used), Year of construction: 1996, There are two similar machines Available Workpiece dimensions: ® 650 x 1000mm Axes: 4-axes Tool turret: Two 12-position tool turrets Tailstock: Yes CNC control: Siemens Sinumerik 840 Weight: Approx. 9.5 tons Hedournyyspfx Acbofg Chip conveyor: Yes Chip breaker: Yes Tool monitoring: ATIS Tool monitoring system

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Time recording from Feb. 2025 Hedpfoyxp H Dox Acbjfg Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15 +725 mm Y-axis travel -245 + 4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG; 3135 N;/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105 +95° Vertical travel (Y-axis) -250 +250 mm SR5 steady rest with eccentric fine adjustment 45–310 mm C8 tool system Tool magazine (2 magazines) 144 Tailstock Quad diameter MK6 180 mm Quad stroke 170 mm Quad force (adjustable) 5–28 kN Quad fine adjustment +/- 0.15 mm Optional equipment Coolant tank capacity 990 l Workpiece measurement MC (Reinshaw) Software Gear hobbing &more

Condition: good (used), Year of construction: 2022, functionality: fully functional, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Hfodpfxeyzd Ris Acbjg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 651 kg, maximum load weight: 2,849 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 3500 2 NEW VEHICLE Internal dimensions: 406cm x 204cm Side wall height: 35cm Loading bed height: 66cm Gross vehicle weight: 3,500kg Payload: 2,849kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum capacity axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm high aluminum profile drop sides with tension latches Side walls fold down and are fully removable on all sides 15mm thick, slip-resistant, durable phenolic plywood floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing rings, each rated at 800kg tensile strength Reinforced 13'' C-specification tires with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector Front LED marker lights Rear lamps with reversing light, rear fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES: PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with bracket - Without side walls (discounted) - AL-KO cable winch 12.5m - Black Edition (powder-coated black side walls and rims) - Integrated ramps, 2800kg - Steel checker plate overlay for the floor - Full LED lighting - Anti-theft lock - Fine-meshed or coarse-meshed net - H-frame - Mesh extension sides, various heights, also closed version - Additional side walls 30cm with tension latches - Flat tarpaulin with or without bows - High tarpaulin, 180cm or 200cm Further accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Pictures are for illustration only and may include optional extras subject to surcharge. Have you not found the right trailer yet? We always have 50–100 vehicles in stock ready for immediate collection. Our workshop is open Monday to Friday, 8:00–17:00, for all kinds of repairs. Hsdpfx Aork Iwnscbefg Specialist in axle repairs, also for caravans. Wide range of rental trailers available. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: excellent (used), travel distance X-axis: 11,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,250 mm, total length: 25,200 mm, table length: 10,000 mm, table width: 4,500 mm, total width: 11,200 mm, total height: 5,500 mm, table load: 30,000 kg, distance table center to spindle nose: 1,500 mm, WALDRICH COBURG MULTITECH 3500 FT GANTRY TYPE, MOVING CROSSRAIL MILLING MACHINE Equipped with Siemens Sinumerik 840 D CNC control. WORKTABLES (No. 2): - Mounting width: 3,000 mm - Mounting length, front table: 4,500 mm - Mounting length, rear table: 4,500 mm - Mounting length, tables coupled: 10,000 mm - T-slots, longitudinal: 28 mm / H8 - T-slot spacing: 250 mm - Max. load, front table: 20,000 kg - Max. load, rear table: 20,000 kg - Max. load, tables coupled: 30,000 kg - Distance between columns: 3,500 mm - Clearance between table and spindle nose (vertical spindle unit VS 125 C/150): 1,500 mm TRAVELS: - Table, longitudinal (X-axis): - Table 1: 5,000 mm - Table 2: 5,000 mm - Coupled: 11,000 mm - Milling/drilling unit, horizontal (Y-axis): 4,500 mm - Vertical spindle slide (Z-axis): 1,250 mm - Crossrail (W-axis): 1,000 mm MILLING/DRILLING UNIT TYPE M4: - Drive power: 45 kW - Spindle speeds: - I range: 5 - 1,300 rpm - II range: 40 - 6,000 rpm - Automatic indexing of horizontal spindle units from 1° to 1° over 0–360° AUTOMATIC TOOL AND ATTACHMENT CHANGER SYSTEM ROBOT: - Double gripper for tool change on vertical and horizontal spindle units - Double gripper for attachment change on milling/drilling unit - Tool holder flange diameter: 97.5 - 125 mm - Max. tool weight: 50 kg - Max. attachment weight: 750 kg SHELF STORAGE SYSTEM: - Number of shelves: 4 - Total tool stations: 192 Hedpfjydmkvsx Acbofg - Total attachment stations: 4 - Tool holders according to DIN 69871 ISO 50 - Station-to-station distance: 140 mm - Max. tool diameter with full occupancy: 135 mm - Max. tool diameter: - Standard: 250 mm - Direct access with shuttle trolley: 315 mm - Max. tool length: - Standard: 375 mm - In top row of the magazine: 600 mm OVERALL DIMENSIONS: - Total machine length: 25,200 mm - Total machine width: 11,200 mm - Total machine height from floor: 5,500 mm COMPLETE WITH: - 1x vertical spindle ISO 50, length 300 mm - 1x vertical spindle ISO 50, length 450 mm - 2x 90° heads - Workpiece inspection with Renishaw probe USED MACHINE

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, maximum load weight: 2,894 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 406 184 3500 2 NEW VEHICLE Internal dimensions: 406cm x 184cm Sidewall height: 35cm Loading height: 68cm Gross weight: 3,500kg Payload: 2,894kg Braked tandem trailer Overrun and handbrake by AL-KO Largest possible axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile sidewalls with tension locks All sidewalls foldable and removable 15mm anti-slip, robust phenolic ply floor Automatic jockey wheel with 400kg support load 8 noise-damping lashing points, each with 800kg tensile strength Reinforced 13" C-rated steel wheels with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector LED marker lights at the front Rear lights with reversing light, fog lamp, and reflective triangle OPTIONAL ACCESSORIES PERMANENTLY REDUCED FROM FEBRUARY 2026 - 100km/h kit (shock absorbers) - Spare wheel with bracket - Without sidewalls (discount) - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps, 2,800kg - Steel plate overlay for floor - Full LED lighting - Anti-theft device - Net (fine or coarse mesh) - H-frame - Leaf mesh sides in various heights, also closed - Extension sidewalls 30cm with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180cm or 200cm - AL-KO winch, 12.5m Further accessories on request! Plus shipping to Gera and vehicle registration documents: €200 net Photos are for illustration purposes only and may show optional accessories at extra cost. Hodpfjghpbkex Acbefg Have you not found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. Our workshop is open weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravan trailers. Large range of rental trailers. Additionally, we offer a wide selection of spare parts and accessories for trailers of all manufacturers. Contact us for a consultation by phone, visit our website, or come by in person.

Condition: used, mileage: 1 km, first registration: 01/2014, 3rd broom Nilfisk Jungo Jet 3500 City Ranger Schmidt Multigo 3rd broom Additional broom You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Hedpfx Ajqxuapscbjfg Errors and typing errors possible, subject to prior sale!

Condition: used, machine/vehicle number: WHLT2350100029458, Year of construction: 2021, Carrying capacity: 2.770 kg GVW: 730 kg Hfjdjtr H Nvjpfx Acbjg VAT/margin: VAT qualifying Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: WHLT2350100032106, Year of construction: 2021, Carrying capacity: 2.770 kg GVW: 730 kg VAT/margin: VAT qualifying Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Hfjdpfxotr Hyxe Acbjg Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: WHLT2350100030919, Year of construction: 2021, Carrying capacity: 2.770 kg GVW: 730 kg Hsdpotr Hkbsfx Acbefg VAT/margin: VAT qualifying Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2023, 0460 mm Hfjdpowp Th Tjfx Acbeg 1500 mm 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm 145 mm

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Hfsdpeyy Rkgjfx Acbog Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. Hfedevu E R Sspfx Acbeg The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Model: WMW NILES DKZ4000 Vertical Turret Lathe (VTL) Faceplate Diameter: 3,500 mm Max. Turning Diameter: 4,000 mm Hfjdjy Ivwbspfx Acbjg Max. Turning Height: 2,000 mm Side Head Vertical Travel: 1,700 mm Side Head Horizontal Travel: 1,000 mm Origin: Germany (WMW NILES)

Condition: used, Year of construction: 2020, overall weight: 1,225 kg, load capacity: 180 kg, arm reach: 3,500 mm, We offer this used KUKA KR 180 R3500 ultra K / FLR industrial robot, year of manufacture 2020. Manufacturer: KUKA Model: KR 180 R3500 ultra K / FLR Year of manufacture: 2020-08 Condition: used Reach: 3500 mm Weight: 1225 kg Payload: 180 kg Machine type: industrial robot Hedpfxjy D Ilvo Acbsfg If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2004, turning length 1.300 mm Hfjdpfxoxa Hkyo Acbog spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm Hodpfx Ajx Emviocbjfg control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: Hsdpfx Ajxb Efrecbefg - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 2018, operating hours: 6,882 h, functionality: fully functional, mileage: 43,895 km, power: 36 kW (48.95 HP), overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, loading space volume: 2 m³, Equipment: ABS, air conditioning, all wheel drive, hydraulics, trailer coupling, Sweeping Machine: + Nilfisk + CityRanger 3500 / Schmidt Multigo + Year of manufacture: 2018 + Control unit with LCD display + 4-cylinder Perkins diesel engine, 36 kW, 2200 cc + Dimensions: 4180mm x 1320mm x 2280mm (LxWxH) + Unladen weight: 1,800 kg; gross vehicle weight: 3,500 kg + All-wheel drive + 6,882 total operating hours + 3,970 sweeping hours + 43,895 total kilometers + 18,573 sweeping kilometers + 2-seater + Air conditioning + Radio + Hydrostatic drive (fast / slow) Max speed: 25 km/h Hfsdpfx Ajxfu Siscbog + Rotating beacon + Sweeper body with 2m³ stainless steel container (tipper) + Fresh water tank for dust suppression + 2x swiveling front brushes + Right brush tiltable + Preparation for manual suction hose Vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical mistakes excepted, subject to prior sale!

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Hfedpfxsw A Rdrs Acbjg Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm