5
CNC deep hole drilling machine TBT T30- 2500 KTN/CNC
with height and width adjustable clamping table
Heidenhain CNC control TNC 131
Drilling capacity 4-40 mm
Max. drilling depth up to 3,100 mm when using 3 steady rests
Drive power 25 kW
Speed from 550-8200 rpm
Clamping table 1800 x 1250 mm
Table load 3.000 kg
Travel transverse(X) 1000 mm
Vertical travel (Y) 350 mm
High-pressure coolant system infinitely variable up to 120 bar
Coolant content approx. 1.500 liters
Ccvkmuh
incl. cooling device
in...
14
Ref. -No.: 10142
Brand: TIBO
Type: M10-250NC
Year of construction: 2002
Type of control: CNC
Control: Siemens Sinumerik 802D
Storage location: Halberstadt
Country of origin: Deutschland
Drilling diameter: 1-13 mm
Bore Depth: 250 mm
Drilling spindle speed: 11.000 RPM
X-Travel: 300 mm
Y-Travel: 210 mm
Z-Travel: 250 mm
Machine weight: 2,5 t
Ccxbuudtrm
Further information:
- With equipment
9
Technical data:
Drilling depth: 600 mm
Drilling capacity steel: ∅ 18 mm
spindle stroke: 600 mm
table area: 1375 x 700 mm
rotatable: 360
spindle mounting: MK 3
max. table load: 2000 kg
travel (X / Y / Z): 1015 x 598 x 323 mm
spindle speed: 4000 rpm
motor power: 2,3 kW
dimensions (width x depth x height): approx. 4500 x 1800 x 2750 mm
Weight: approx. 3000 kg
Cbf8mhm3fd
accessories:
div. tools
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology...
15
CNC control Sinumerik 840D
diameter of the face plate 1450mm
rebore head diameter 850mm
some steady rests
coolant device
Brf7xzoqxm
chip conveyor
Technische Daten / technical details:
Umlaufdurchmesser über Bett / rotary diameter over bed 1250 mm
Umlaufdurchmesser in Lünette / rotary diameter at steady rest 1100 mm
Spitzenweite / center to center 11000 mm
Spanndurchmesser Planscheibe / clamping diameter at face plate 1100 mm
Drehzahlbereich / spindle speed 2-300 U/min
Vorschubbereich / infeed 3...
8
TBT CNC deep hole drilling boring machine BW 200-1
- Year of construction 2001
- Siemens 840 D
- 20-fold tool changer for drilling/milling tools
- 20-fold tool changer for single-lip gun drills
- Chip conveyor
- High-pressure coolant system 80 bar
X axis: 800mm
Y axis: 600mm
Z axis: 800 mm
W axis: 1250 mm (drilling depth with 1 bezel 900 mm
B axis: 0-360 degrees
Spindle speed: 14.000 rpm
Drive power: max. 15 kW at 2.900 rpm
Drilling range from 4-25 mm
B9ewjbcpgt
Face milling up to 120 mm
5
CNC control Sinumerik 840D
diameter of the face plate 1200mm
steady rest
chip conveyor
Technische Daten / technical details:
Brf8izbrnf
Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm
Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm
Max. Bohrtiefe / max. drilling depth 8850 mm
max. Bohdurchmesser / max. drilling diameter 326mm
Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm
Drehzahlbereich / spindle speed 1-300 U/min
Vorschubbereich / ...
4
DEEP HOLE DRILLING
Make : UTITA
Model : AF200
Min/Max Drilling capacity : 30-120 mm.
Max. boring diameter : 200 mm
Max. workpiece diameter : 400 mm
Fh98w9d
Drilling length : 5650 mm.
Spindle speed : 3400 rpm.
The machine is complete in all its parts and accessories with one drilling tool
10
Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250
machine-no. 418.311.215, year of construction 1989 with control SIMATIC S5
technical data:
max. drilling depth 250 mm
table size 420 x 780 mm
drilling range steel ST 60 full drilling max 16 mm
reaming max 20 mm
drilling method ELB (single lip drilling)
Number of drilling spindles 1
Main spindle drive 2,6/ 3,2 kW
Speeds 1020 - 4400 rpm
1960 - 2950 rpm
2950 - 4400 rpm
4400 - 8950 rpm
Filter plate gap filter 60 l/min
cooling...
12
Manufacturer: Ixion
Type: TL1004
Year of manufature: 2000
Cdgnnuop
Condition: fully functional, still in operation
Operating hours: unknown
Weight: 4.800 kg
Speed: max. 4000 min/-1
Traverse paths: 1000 x 400 x 1000 mm
Table surface: 1675 x 700 mm
Tool holder SK 40 according to DIN 69871
5
Heidenhain iTNC640
Traverse paths:
Maximum drilling depth (V-axis): 1,000 mm
Column, longitudinal movement (X axis): 1,000 mm
Drilling slide, vertical movement (Y axis): 500 mm
Drill slide, approach (Z axis): 400 mm
feed, adjustable axis speed: 0-12,000 mm/min
Drilling-milling spindle:
Drilling diameter min-max. (ab. diameter 25 with pilot hole): 4-32 mm
adjustable spindle speed, max.: 6.000 rpm
Motor power: 13 kW
Motor torque: 115 Nm
Hgs28sn
Standard connecting piece for single-lip drills (Ø>6 ...
7
technical data: IXION TL 1001 , year 1998 , very good condition
X / Y / Z 1000 x 400 x 1000 mm
drilling capacity W = 1400 mm
drilling capacity steel Ø 25 mm
drilling capacity cast iron Ø 40 mm
Qjwln
approx. 80 pieces deep hole drills from 2 mm to 22 mm
length from 320 to 1500 mm
Tapping 20 MM
spindle cone Sk 40
spindle Z = CNC = 1000 mm
table area 1675 x 700 mm
power 5,5 kW
spindle speed : 4000 1/min
High pressure system
paper belt filter
Control : Meldas 500
6
For technical data see documents...
Cb0h3vpfmq
13
HEAVY DUTY DEEP HOLE DRILLING MACHINES
Make : MGAD
Model : 350 x 10000
Spindle diameter : 800 mm
B39wx9roxl
Spindle bore : 350 mm.
Drilling capacity : 200 mm
Workpiece length : 2000 mm. ( You can drill on one side and then reverse the workpiece and drill on the other side).
THE MACHINE IS COMPLETE IN ALL ITS STANDARD ACCESSORIES AND PARTS, AND ITS IN EXCELLENT WORKING CONDITION.
13
Deep hole drilling machine /deep hole drilling rig make LOCH type TB 2-11/300/2
make # 182-300-1970, year of construction 1991
technical data:
Drilling depth with plunging spindle max. 300 mm
workpiece diameter/ full drilling range in steel 4 - 18 mm
number of spindles 2
Drilling system ELB
Drilling method rotating tool
counter-rotating workpiece
working stroke, full + reaming max. 1000 mm
centre height 249,9 mm
Nk3cvs9l
Main spindle speed 96 - 2500 rpm.
Speed steps 4
feed stepless 0 - 1000 mm...
6
The machine is in like new condition!
Manufacture: Wohlenberg/SFT
Drilling method BTA
Cc3ccaa
Drilling range diameter 25-125 mm
Max. drilling depth 3000 mm
Extension to 4000 mm would be possible!
9
Make: WOHLENBERG
Type: B-1000
Control: SIEMENS 840D
Year: 2014
incl. Boring shaft 75 x 5900
incl. Boring shaft 94 x 5900
incl. Boring shaft 106 x 5900
incl. Boring shaft 130 x 5900
Specifications
Metric US Standard
Max. drill Ø steel
7tm7qia8
250 mm
Spindle bore
100 mm
Drilling depth
6000 mm
Power on spindle
63 kW
Speeds / ranges
750 Rpm
Dimensions (Estimate)
Length
18000 mm
Width
3800 mm
Height
2100 mm
Weight
35000 kg
Please Note: The information on this page has been obtained to the bes...
5
ID-Nr. 4.1-545
1 Deep hole drilling machine Loch TB 1-22S-600
Qbswnynj
Year Built: 1987, good condition
- deep hole drilling machine -second hand-
- TBT - T30-2-250
- yom 1977
- Z-axis 400mm
- derzeitige Drehzahlen bei Motorstellung 1400/2800rpm:1450/2900rpm
- ball bearing in z-axis
B7mn2phxbm
- rotating sleeves
- max. coolant oil pressure: 50bar
- 1200 liter tank
- without tools-
4
IMSA Deep Hole Drilling Machine with Chip Conveyor
Machine type: MF1500
Machine number: 010850021
Total weight: 21 t
Connected load: 25 kw
Dapecc2
Control system: SELCA S3045D
Maximum drilling diameter: 32 mm
6
Deep hole drilling machine make TBT type T10-500
Machine # 410 311 053 Year of manufacture 1980
B7qvfapn
Technical data:
Drilling depth max. 500 mm
drilling range in steel 3 -12 mm
reaming max. 15 mm
Speed of the working spindle min. 2520 1/min
Speed of the working spindle max. 8000 1/min
feed stepless 8 - 160 / 35 - 320 mm/min
Nominal speed stepless 5,9 - 53 / 11,8 - 106 1/min
control range 1 : 9
rapid traverse speed 3 m/min
Center height above floor 1150 mm
Center height over bed 230 mm
Cente...
10
T30-1000 KTN/NC
The machine will be completely overhauled and will be like new!
The machine gets a completely new electrical system with our control.
Technical specifications
Drilling process: ELB
Number of drilling spindles: 1
Min. Drilling diameter 4 mm
Max. Drilling diameter 30 mm
Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm
Max. Rapid traverse speed X + Z axis 4000 mm / min
Max. Rapid traverse speed y-axis 2000 mm
Bhz0vfh...
15
Deep hole drilling machine IXION TL 1001
1998
quill TL 1001 ( Z ) : 1000mm
drilling unit vertical ( Y ) : 300mm
Table transverse ( x ) : 700mm
In drilling direction ( W ) : 1000mm
Dradostbu
table surface : 1200 x 600mm
Table load : 2000kg
SK 40 mounting
All documents available.
Videos of the machine available !
3
Number of spindles: 4, spindle distance: 120mm, connected load: 30kW, without accessories.
Vzexvanh
12
For sale is a IXION cycles deep hole drilling machine TL 601
machine no. 950192
year of construction 1996
Manufacturer machine factory IXION Otto Hafner
-travel
+ quill Tl 601 (Z) 600 mm
+ quill TL 1001 (Z) 1000 mm
+drilling unit vertical (Y) 300 mm
+ table transverse
(table surface 1200 mm x 600 mm) (X) 700 mm
+ table transversal
(table surface 1375 mm x 700 mm) (X) 700 mm
Cagesfh8b3
+ table crosswise
(table surface 1675 mm x 700 mm) (X) 1000 mm
+ In drilling direction (W) 1000 mm
-clamping tab...
6
height from bed to centre of drill: 315 mm
max. reaming Ø: 178,3 mm
bed length: 9400 mm
drilling depth approx.: 3150 mm
feed range stepless: 70 - 1750 mm/min
M7m3il
rapid traverse speed: 4,25 m/min
drilling headstock, bore: 62 mm
main spindle speed: 180 - 1000 rpm
Main spindle drive: 380 V, 15 kW
Machine weight: 6,6 t
10
Universal deep hole drilling machine make DEGEN type UTB 500
Machine # 061/86 Year of construction 1986
Technical data:
quill stroke / drilling depth 500 mm
travel X (table crosswise) 400 mm
travel Y (spindle head vertical) 450 mm
Travel Z (table longitudinal) 250 mm
distance spindle center to clamping surface 250 mm
max. workpiece weight 1000 kg
table clamping surface 800 x 400 mm
table height 1000 mm
S89ytp
spindle mounting MK 2
max. drill diameter with twist drill/ speed bit 16/ 25 mm
max. th...
6
The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW!
This can be like to inspect under pressure.
On request we can send you more pictures.
Number drill spindle 6
ELB and BTA drilling
Min. drilling diameter 3 mm
Jw7saowj
Max. drilling diameter 20 mm
Max. drilling depth 1000 mm
We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!
9
Scope of supply
- TBT ML 250-4-850 deep hole drilling machine
- Control: Siemens Sinumerik
- coolant pump
I3geplz
- fire extinguishing system
- Complete documentation
14
Dear Ladies and Gentlemen,
a TBT deep drilling machine, type T30, completely overhauled in 2022 is offered for sale. This is a 2-spindle version. The equipment was used in the company's own contract drilling department, so it was regularly and professionally serviced and maintained.
A machine inspection can be arranged by appointment in Dettingen an der Erms.
Detailed technical data can be found under the photos.
Rough machining data are as follows:
- Solid drilling diameter: 4 - 20 mm
- Borin...
8
Drilling diameter ~30 mm
Drilling length ~ 750 mm
speed 690 - 5400 rpm
B8b0itpyz3
rapid traverse
feed stepless 35-320 mm/min
tank approx. 1000 liters
OPTIONAL : with counter-rotation and dividing head for centric bores
Under power , ready for use
10
With a serie of accessories, sockets and various drills with different lengths.
ROTARY TABLE
Mcfxsrxz
Machine dimension 1200x1500 mm
Max load on table( in rotation) 20.000 kg
Max load on table ( not in rotation) 450.000 kg
AXIS TRAVELS
Longitudinal travel (tool magazine excluded) 2350 mm
Traverse stroke -deep hole drilling axis 1500 mm
Verical stroke- milling 1166 mm
Verticale stroke - deep hole drilling 1000 mm
X axis 2350 mm
W axis 650 mm
MOTOR POWER
Motor power 7,5 kw
Motor power - drilling a...
2
Horizontal hand lever deep hole drilling machine Fabr. UNBEKANNT
Technical data:
Table size 230 x 340 mm
drill chuck size 20 mm
Cbtoma9e
drive power 2,95 PS
dimensions approx. 1000 x 850 x 1400 mm
weight approx. 150 kg
with
- height adjustable table
- drill chuck up to 16 mm
used
7
The machine is completely overhauled and therefore as good as new!
Technical specifications
Drilling method : single-lip drilling
Number of spindles 1
Drilling range in steel D= 1-6 mm
Drilling depth 420 mm
Wl2v797b
Max. workpiece length 420 mm
Manufacturer: TBT / SFT
New electrics and new controls!
10
Machine type: Deep hole drilling machine
Manufacturer: TBT Tiefbohrtechnik
Model: 2M-320-6/3-800
Serial number: 106124-11
Year of manufacture: 2002
Machine can be inspected in operation.
B8oha92wvg
Available from June 2022
Important data: see picture