Used Norgren 4546666000000000 for sale (15)

Condition: used, 454666600000, NORGREN, dosing cylinder, adhesive cylinder and synchronous motor Model: 454666600000 Condition: Used Nwodpfx Aqsuz D Ndovsg

Condition: like new (used), Norgren I374997 Nodpfot T Hlksx Aqvswg

Condition: like new (used), 0.4–10 bar / Max INLET 14 bar Application: Machinery/equipment from Glaston, etc. Width: 54 mm Height: 54 mm Nwodpfey U E Upjx Aqvjg Depth: 133 mm Weight: 597 g Condition: Like new

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm Nwodpfx Asd Hvh Eeqvsg -Number: 6x available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm -Number: 2x available Njdped Hvhvefx Aqvewg -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Nsdsd Hvhtopfx Aqvjwg -Stroke: 115 mm -Piston diameter: 50 mm -Number: 6x available -Price: per piece -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 260 mm -Piston diameter: 80 mm -Number: 2x available Nsdpfed Hvhxex Aqvowg -Price: per piece -Dimensions: 610/95/H95 mm -Weight: 6.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 50 mm -Number: 2x available -Price: per piece -Dimensions: 530/65/H90 mm Nwsdpfx Asd Hvh Djqvog -Weight: 2.9 kg/piece

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm Njdpfxed Hui He Aqvjwg -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 60 mm -Piston diameter: 40 mm -Quantity: 5 available Nsdpfxjd Hvh Tj Aqvewg Price: per piece -Dimensions: 255/55/H80 mm -Weight: 1.1 kg/piece

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Nedow T U A Sspfx Aqvewg

Condition: good (used), Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm -Note: without motor, can be included for an additional charge -Transport dimensions: 2800/150/H135 mm Nedpfx Aeii Sdzsqvjwg -Weight: 24kg

Condition: new, connection G 1/4 adjustable from - up to 0,7 - 8 bar weight 0,86 kg high flow pressure regulator body material: zinc alloy Nwjdpfod Ih N Sox Aqvog withour gauge manual included 10 pieces on stock!

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Nsdpfxeyluics Aqvowg Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Nwjdpot Hxa Tjfx Aqvsg Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.