Pneumatic cylinders

Norgren RA/8040/M/60

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. Dkedpfxowyda Uo Aa Nol • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 46,000 h, Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible. Dksdpfjt R Trfjx Aa Nel

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit Dsdpst Sc T Ijfx Aa Njkl

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW Dedsr Am Sqopfx Aa Njkl * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: 90 kg

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Dksdpfx Aot Sc Swsa Nel

Condition: new, Year of construction: 2025, Powder coating oven powered by natural gas. The furnace is designed for polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of AISI 1.4301 acid-resistant sheet metal, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical data: • Power supply 400V 50Hz • Riello 90kW burner • Operating temperature 210C • Temperature max 230C •High-class thermal insulation 150mm Equipment: • Upper transport, • Convection (Equal temperature throughout the furnace, accelerating the heating process of the details), Dodpfx Ajh Igq Roa Nskl • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at the appropriate level), • The oven is equipped with rails for easy transport. Pvxgim CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. Djdpfx Aaex Ricco Nskl - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left Dkodpfx Asgy Dbdja Nel -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: new, Transport roller conveyor with driven rollers. Roller surface made of stainless steel, zinc-plated, plastic, o.a.. Dsdpfxjd Rh A Re Aa Nskl Services and dimensions according to customer's request. Optional interpretation as angular conveyor with turnstile.

Condition: excellent (used), functionality: fully functional, Rex hacksaw circular milling cutter Dodpfou R A Tmox Aa Njkl