Used Numalliance Cnc Wire Bending Machine for sale (66,879)

Year of construction: 2005, condition: used, A Numalliance CNC wire bending machine for the production of 2D and 3D wire-formed parts is offered. Axes: 7, wire diameter range: 3mm-10mm, control: CNC. Weight: approx. 4100kg, dimensions X/Y/Z: approx. 7900mm/3700mm/2000mm. Documentation available. The machine has been shut down since 2025. An on-site inspection is possible. Bdodpfx Abezv T I Retjg

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Bedezka Nwepfx Abtsdg

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Bjdjycwtfjpfx Abtodg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Bedoy Uuw Topfx Abtsdg Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 4,250 mm, power: 19 kW (25.83 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 147 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 3,600 mm, Equipment: documentation/manual, 38x2mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Bdjdpfovurm Hex Abtog Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 44 kW (59.82 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 48 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,600 mm, Equipment: documentation/manual, 76x3mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Bdjdpfx Aovwg H Hjbtog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: new, functionality: fully functional, Year of construction: 2026, CNC Rebar Bending Machine – GW45 | Ø 6–32 mm | 4 kW | 24 Month Warranty CNC-controlled rebar bending machine for medium to heavy-duty reinforcement steel processing. The GW45 is equipped with a large 360 mm turntable and is capable of bending rebar with diameters from 6 to 32 mm. Its compact and mobile design is ideal for both workshop and on-site applications. Key Specifications: Bedpey Swpgefx Abtodg • Rebar Diameter: 6–32 mm • Turntable Diameter: 360 mm • Motor Power: 4 kW • Power Supply: 380 V • Machine Weight: 270 kg • Dimensions: 880 × 850 × 800 mm ✅ CNC control – programmable bending angles ✅ Large 360 mm turntable for heavy-duty rebar ✅ Compact & mobile – suitable for on-site applications ✅ All spare parts in stock – motor, bending discs, control electronics ✅ 12 months warranty ✅ CE certified | Technical support available

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this good Bihler GRM 80 punching and bending machine, year of construction 1989. Bdedpfx Ajywty Esbteg with 5 slides, 30T press, straightener, feeder with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Bdsdpfxszpypzj Abtsg Fully automatic wire threading

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel Bodpfxjhmmfkj Abtodg - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Bdsdpoxpqy Dofx Abtjg Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Bdodpfx Abeya Iaqstog Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Bsdpfxszka H Aj Abtsdg

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Bdedpfx Asxcx Atobtjg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, tube wall thickness (max.): 2 mm, Giętarka do rur CNC SHUZ TUNG CNC38BR2 Producent: SHUZ TUNG Machinery Industrial Co., Ltd. (Tajwan) Model: CNC38BR2 Rok produkcji: 2018 Dane techniczne: * Maksymalna średnica rury: 38 x 2 mm * Moc: 22 KM * Zasilanie: 400 V * Waga maszyny: 2500 kg Opis: Giętarka do rur CNC SHUZ TUNG CNC38BR2 w bardzo dobrym stanie technicznym i wizualnym. Maszyna jest wyposażona w system sterowania CNC i jest oferowana z dużym pakietem narzędzi wliczonym w cenę sprzedaży. Nadaje się do gięcia rur stalowych, ze stali nierdzewnej, aluminiowych i innych metali. Maszyna posiada w pełni zamknięty system bezpieczeństwa i automatyczny podajnik rur. Idealna do produkcji rur samochodowych, meblowych, poręczowych, wydechowych i przemysłowych. Bjdpfxszq Dh Rj Abtjdg Rceww Tweza Sw Hs Alsd Dołączone narzędzia: * Ø8 mm – R17,5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Maszynę można obejrzeć na miejscu. Dostępna pomoc przy załadunku. Lokalizacja: Polska. Dodatkowe zdjęcia i filmy dostępne na życzenie.

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t Bdsdey Uwhbopfx Abtjg - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations. Bdsdpfx Ajyak E Nobtjg  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD63CNC4A2SP, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 63 mm, bending angle (max.): 190 °, overall weight: 1,800 kg, total length: 4,000 mm, total width: 1,000 mm, total height: 1,300 mm, power: 18 kW (24.47 HP), input voltage: 380 V, type of input current: AC, number of digital displays: 1, warranty duration: 12 months, Equipment: emergency stop, foot remote control, Full-Automatic Single-Head CNC Bending Machine with Auxiliary Push Function Machine Model: BD63CNC4A2SP Machine Applications  Transportation Sector For municipal engineering, locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification Model: BD63CNC4A2SP The Largest Applicable Carbon Steel, Copper, Aluminum Pipe or Profiles Φ63×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * The Largest Applicable Stainless Steel or High Alloy Steel Pipe, Profile Etc. Φ55×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * Maximum Reciprocating Feeding Pipe Φ63MM Bodpoyaz Egofx Abtjdg PROFILE AS PER MOLD DESIGN * Maximum Feeding Stokes (*) 3200MM Maximum Bending Radius (*) 550MM Maximum Bend Angle 190° Maximum Core Pulling Distance 3500MM Equipment Working Height 1300MM Pipe Bending Servo Power 7.0KW Pipe Bending Speed MAX. 150°/S ADJUSTABLE Bending Accuracy ±0.1° Feeding Servo Power 2.0KW Feeding Speed 200-1000MM/S ADJUSTABLE Feeding Accuracy ±0.1MM Rotation Servo Power 1.0KW Rotation Speed 180°/S ADJUSTABLE Rotation Accuracy ±0.1° Hydraulic Motor 7.5KW Hydraulic System Pressure 12 MPA Total Power 18 KW Equipment Size: Length * Width * Height 4000*1000*1300mm Equipment Weight 1800KG

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz Bdjdpfon Ut A Sox Abtog 30 Kw Production year: 1997

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Bsdoiau Uujpfx Abtsdg Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Bjdpfxjmqk Tpo Abtsdg Power - 3,5 kw

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Bodpfxeyr N Erj Abtsdg Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight Bdedpfsvd Dftox Abtjg 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Bdjdpfjt R Tgisx Abtsg Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min Bdodsylyh Depfx Abtsg - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg