Used Oerlikon-Boehringer Center Lathe for sale (16,851)

Condition: used, Year of construction: 1987, greates pass round over bed 560 mm swing diameter over face slide 365 mm turning speed range - main spindle 11,2 - 2.240 min/-1 drive capacity - main spindle 15 kW spindle head No. 8 spindle diameter in front bearing 100 mm spindle bore 62 mm machine weight ab. 2,5 t dimensions of the machine ca. L 3,5 x B 2,0 x H 2,2 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has undergone a geometric overhaul. Technical features & accessories: - 3-axis digital readout, Fagor - Rapid traverse Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Cedpfx Abey Nfblsxerf Prior sale is reserved.

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Crsdpfx Aoy U Nqnjbxjf

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Cjdpfx Aoy Uyf Nebxsrf

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Codpsvzn Itsfx Abxsrf Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: used, Year of construction: 1982, turning diameter over bed 500 mm turning length 1500 mm centre height 250 mm spindle passage 70 mm swing diameter over face slide 285 mm turning speeds 11,2 - 2240 U/min Crodpfxjqy Rp Ue Abxsf

Condition: new, Year of construction: 2025, functionality: fully functional, Heigth of center: 500 mm Distance between center: 3000 mm Bed width: 755 mm Max. swing over bed: 1000 mm Max. swing over slider: 610 mm Diameter of spindlehole: 130 mm Spindlenose: D1-15/short cone 15 Speed range: 3.15 - 315 RPM (21 steps) Range longitudinal feeds: 0.1 - 12 mm/U 57 steps Range cross feeds: 0.05 - 6 mm/U 57 steps Quick feed in Z- and X-Axis: 3700/1850 mm/min Metric thread: 1 - 120 mm Inch thread: 3/8 - 28 Pitch/Inch Model thread: 0.5 - 60 mm Diametral pitch: 1 - 56 DP Diameter of Tailstock Quill: 160mm Quill konus: MK 6 Quill stroke: 300 mm Power of engine: 22 KW Crsdszr E E Tepfx Abxef Weight: 14400 kg Dimensions LxWxH = 6350 x 2190 x 1810 mm Accerssories - D800 mm independent face plate - 3 axis DRO system - Coolant tank - Steady rest in range of D20 - 480 mm - Following rest in range of D20 - 200 mm - 4-fold tool holder - Chuck cover - Rapid speed on longitudinal and cross slides - Motorized tailstock

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. We provide on-site machine loading. Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm Crodpozqt Dzjfx Abxof 12 spindle speeds Steady rest: fixed and traveling

Condition: used, Distance between centers 750 mm greates pass round over bed 400 mm swing diameter over slide rest 230 mm bed width 300 mm Csdezrh Rfjpfx Abxjrf spindle bore 51 mm spindle tunring speed 66 - 2.000 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: like new (used), Year of construction: 2018, Manufacturer: Optimum Maschinen Germany GmbH Codpfx Absy Ia Uqoxsrf Model: L34HS Serial Number (SN): 11261804002 Machine Type: Flat-bed CNC Lathe Year of Manufacture: 2018 Motor Power: 3.7 kW Power Supply: 400 V / 50 Hz Spindle Speed Range: approx. 30 – 3500 rpm Maximum Spindle Speed: 3500 rpm Maximum Turning Diameter: approx. 350 mm Turning Diameter over Cross Slide: approx. 146 mm Distance Between Centres: approx. 600 mm Travel X/Y/Z-Axis: approx. 185 / 185 / 540 mm Taper / Mount: MT 3 Weight: approx. 1200 kg

Condition: new, Maximum turning diameter: 1,100 / 1,800 mm Turning diameter over bed: 538 mm Turning diameter over slide: 300 mm Spindle mounting: DIN 55026 Spindle bore: 82 mm Spindle speeds: max. 3,000 rpm Drive power: 12/30 kW Crjdpszrluujfx Abxef Machine weight: 2,700 / 3,000 kg

Condition: excellent (used), Year of construction: 2009, These very good, used universal lathes come from a training center and are being sold due to restructuring. There are 3 identical lathes available. Center height: 180 mm Distance between centers: 1000 mm Swinging diameter over bed: 360 mm Swinging diameter over cross slide: 250 mm Bed width: 190 mm Spindle bore: 42 mm Spindle mounting according to DIN 55027: Size 5 Credpfjziuybox Abxof Speed range, 16 steps: 33 – 2000 rpm Feeds, 13 longitudinal: 0.03 – 0.4 mm/rev Likewise, 13 cross: 0.01 – 0.13 mm/rev 27 metric threads: 0.2 – 7 mm 36 Whitworth threads: 4 – 72 threads/inch 18 module threads: 0.3 – 3.5 module 21 diametral pitch threads: 8 – 44 pitch Tailstock mounting: MK 3 Drive power: 2.25 / 3.75 kW Machine dimensions L x W x H: 2000 x 1000 x 1550 mm Weight: 1100 kg Accessories / Special features: • 3-axis digital display RSF • 3-jaw chuck, diameter 200 mm • Quick-change tool holder system “Multifix”, size B • Chuck guard, foldable, electrically secured • Large chip guard • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck Cjdpfx Abevwgmaoxsrf - 4-jaw face plate - steady rest

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm Csdpfx Absy Hxq Usxerf turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: good (used), Year of construction: 2013, turning diameter over bed 520 mm Cjdpfx Abezl Hb Nsxjrf turning diameter over slide rest 330 mm turning length 1500 mm spindle bore 80 mm spindle turning speed - stepless 20-2000 U/min spindle drive 7,5 kW weight of the machine ca. 2,2 t

Condition: ready for operation (used), Year of construction: 1985, 630 x 2000 Includes numerous accessories. New Acu-Rite measuring system installed 2 years ago. Codpfozq Eh Sex Abxorf

Condition: used, OKUMA MAC TURN 350-W is a CNC Lathe-Milling Center, engineered for precision, high accuracy and reliability. Capacities: turning Ø 530 mm (over cross-slide), 550 mm (over bed); spindle hole 62 mm; turning length 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Specs: 9 axes; C axis 360° res. 0.001°; B axis swivel 210° res. 1°; spindle speeds up to 5000 t/min (main and back spindle); milling cutter speeds 6000 t/min; spindle motor 22/15 kW. Equipment: 44-station tool changer, chip conveyor. Delivers tight tolerances; ideal for automotive, aerospace, medical and precision manufacturing. Crodpjzqbkpefx Abxjf

Condition: new, WORKING RANGE TURNING / - swing diameter (max) 520 mm - turning diameter (max) 260 mm - worpiece length max. 1500 mm MAIN SPINDLE Csdpfx Ajfcqtdsbxorf - spindle bore diameter 78 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 78 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r - pitch of spindle 6 mm TAILSTOCK - sleeve diameter 68 mm - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - total weight approx. 1810 kg

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Csdpfxsfcqtcs Abxerf Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Csdpfx Aezpwwpobxerf Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Crodpfjyalurox Abxef Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine, similar to the WEILER Commodor, is still in working order and can be inspected at the factory in good condition. Attached is a PDF with technical data. Codpfxszr R Tij Abxjrf

Condition: like new (used), Year of construction: 1996, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 2405, turning diameter over cross slide: 185 mm, spindle bore: 40 mm, turning length: 750 mm, total length: 1,830 mm, total width: 900 mm, total height: 1,300 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 45 rpm, overall weight: 1,020 kg, spindle motor power: 3 W, Equipment: documentation/manual, Condition: Like new, few hours of use from university Includes the following accessories: 3-jaw chuck Rotating center Steel tool holder insert 2 rotating centers Technical data Manufacturer: Weiler Type: Condor B Year of manufacture: 1996 Center height: 165 mm Center distance: 750 mm Spindle bore: 40 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 185 mm Spindle speeds: 45 - 2800 rpm Longitudinal feed: 0.015 – 3.7 mm/rev Metric thread pitches: 0.18 - 28 mm Drive motor: 1.5 / 3 kW Dimensions L x W x H: approx. 1.83 x 0.90 x 1.30 m Cjdpszr R Elefx Abxerf Weight: approx. 1020 kg

Condition: ready for operation (used), Year of construction: 1974, Available immediately ex-works: L & Z lathe, Okuma Center height 220 mm Diameter over bed 440 mm Diameter over cross slide 300 mm Spindle bore 55 mm Drive power 5.5 kW Chuck Tool holder Weight 2400 kg Cedpfozr D Elox Abxerf Price: EUR 1,500.00 plus VAT, ex-works

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm Cjdpfx Aeu Ixw Asbxjrf revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Credezp Nknepfx Abxjf Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm