Used Okuma Mac Turn 550 W for sale (53,415)

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted Godpfx Asyt Nvtsnxjit - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment Giodpfx Asy Ddiwsnxst • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Gsdpfx Aney Atu Tsxsit

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,067 h, functionality: fully functional, machine/vehicle number: 122616, travel distance X-axis: 500 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 1,650 mm, controller model: OKUMA OSP P200L, center width: 1,500 mm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 95 mm Travel Z-axis: 1,650 mm Turning diameter over bed: 550 mm Power: 22.0 kW Distance between centers: 1,500 mm Spindle bore: 80 mm Gjdpfsy Rxprox Anxeit Counter spindle speed: 4,500 rpm Tool magazine: 44 positions Tool holder: HSK-F63 MACHINE DETAILS Control: OKUMA OSP P200L Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,800 x 2,900 mm Transport weight: 13,700 kg Shipping packages: 7 units Operating hours: 19,067 h EQUIPMENT Automatic workpiece feeder with controlled arm by Pneumotec Automatic bar feeder by LNS Quick Load Servo III Counter spindle VAC-MB11 Milling head with automatic tool changer Turning turret: 12-position tool changer Chip conveyor Turret head Driven tools Bar loader Three-jaw chuck Tool magazine C-axis Documentation CE marking

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Gedjvta Rkjpfx Anxoit Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Gisdpfx Ansxvzp Aoxot Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073 Gijdpfxourfz Is Anxet  

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Giedpfsxwy S Eox Anxot Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Giedoyxmyuepfx Anxjt Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Gijdpfx Ajxb Awfenxjt Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Godpfx Aoxqyiksnxjit Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement Gsdpfxsy Ewy Se Anxjit - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 Gsdpfx Aoyg Rf Nonxeit - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h Godpfx Aeyiu Dbenxjit - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Godpfx Anox D Rvhsxjit • ATC / tool magazine: 40 positions • Toolsetter • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Barfeeder IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Gijdpeyrf T Ssfx Anxjt Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Gsdpfjyux S Hjx Anxeit

Condition: excellent (used), Year of construction: 2013, CNC Turning and Milling Center Okuma Multus B400II-W 2000 Control: OSP-P 300S Year of manufacture: 2013 X-axis: 690 mm Y-axis with travel: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° increments Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80 stations Equipment: - Collision avoidance system - Tool monitoring system - Tool measurement device - Tool presetting - Subspindle with tailstock function - Renishaw probe - Automatic door - NC steady rest carrier with SMW SLU-Z 3.2 steady rest - ONE touch IGF Gisdsyk Tv Espfx Anxet - Hinged belt conveyor - Main spindle replaced in 2022

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Gijdpfxowmdv Ns Anxot

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Gisdpji Eca Iefx Anxet

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Giedpfxoi Eca Se Anxjt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm Giedpfotdg Evox Anxot CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] Gjdpfxjxz Hrgj Anxeit EQUIPMENT - CNC : OKUMA OSP-P200 LA - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Condition: used, L: 950, W: 550, H: 600 (mm). Product: Stacking box steel. Type: Fixed construction. Version: With four closed walls. Sales unit: per item. Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Euronorm (mm): none. Colour: various. Surface treatment untreated. Gijdpfex Aht Uox Anxst Internal length (mm):

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) Gedpfxeyqx Rzj Anxoit 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.