Used Orma Heavy Duty Membrane Press Pin System for sale (51,471)

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included Nsdpfx Aezmnyisiqold

Year of construction: 1999, condition: good (used), We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer Italpresse, Model Form Air. Year 1999. Two working fields 2330x780mm. Njdpfxsd Ew Tbe Aiqold Possible to see at work. Documentation included

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Nlsdpfxorwxz Rs Aiqjd Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2026, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 30950 kg, Tare weight: 8050 kg, Gross weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2026, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 240x170, Battery for ramp, TAILLIFT 2,000 KG 3x 9 TON SAF AXLES DISC BRAKES = Additional Information = General Information Cab: Day cab Registration number: OX-74-GS Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 3: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Weights Tare weight: 8,050 kg Payload: 30,950 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-run, 2000 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Nljdpjzk Un Uefx Aiqjd Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,250 mm, loading space width: 2,450 mm, total length: 11,700 mm, total height: 1,600 mm, color: other, Year of construction: 2013, = Additional options and accessories = - Steering Axle = More information = Axle configuration Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 8.000 kg Carrying capacity: 34.000 kg GVW: 42.000 kg Functional Height of cargo floor: 160 cm Condition General condition: average Technical condition: average Visual appearance: average Identification Nlsdpfx Aoyzt Sijiqod Registration number: QAQU503 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors Nodpfx Aszhtbhsiqeld • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clear span: 2,700 mm, total length: 45,600 mm, total width: 1,200 mm, total height: 4,500 mm, load per truss pair (max.): 2,370 kg, load capacity per storage section: 12,000 kg, number of shelf rows: 6, Dexion P90 heavy-duty pallet racking systems – galvanized – approx. 45.6 m total length – 24 racking bays – industrial design For sale is a comprehensive package of high-quality pallet racking systems from the manufacturer Dexion, System P90/H, in a galvanized industrial design. The racking systems come from a modern industrial hall and are ideally suited for warehouses, logistics, production facilities, toolmaking, mold making or mechanical engineering. All systems have pallet support rails for Euro pallets and are designed for high loads. The galvanized design provides durable corrosion protection and ensures a long service life even under demanding operating conditions. Nledpfjzkuyksx Aiqjd The sale is preferably as a complete package, but individual sales are also possible. Total scope * 6 complete pallet racking systems * Manufacturer: Dexion * System: P90 / H * Year of manufacture: approx. 2010–2011 * total 24 racking bays * Total length approx. 45,600 mm * Height approx. 4,500 mm * Depth approx. 1,200 mm * total 109 pairs of crossbeams * complete equipment with pallet support rails * partially with impact protection Manufacturer: Dexion System: P90 / H Design: galvanized Crossbeam types: * SLO-089/20 * SLO-102/20 Bay load: * up to 2,370 kg Field load: * up to 12,000 kg Bay height: * up to approx. 1,300 mm Axial dimensions: * 1,800 mm * 2,700 mm Racking height: * approx. 4,500 mm Racking depth: * approx. 1,200 mm ⸻ Scope of delivery * 6 complete pallet racking systems * 24 racking bays * 109 pairs of crossbeams * all upright frames * bracing * pallet support rails * back panel mesh (depending on the system) * impact protection (depending on the system) Delivery without stored goods, pallets and other items shown in the pictures. Condition The racking systems come from industrial use and are in a well-maintained, used condition with the usual signs of wear and tear due to age and use. A large part of the systems has been inspected according to DIN EN 15635 by LB Knape or Regal Steger.

Condition: new, Year of construction: 2025, MODEL : HF500 6” (12”) NAME: PANT CRIMPING PRESS- HEAVY DUTY Power 500 Ton MAX CRINPING RANE: 310MM OPENING TRAVEL: + 115 MMM OPENING WITHOUT THIS : 360 MM Nsdjwbtaajpfx Aiqold 90° ELBOWS 3” CLOSING SPEED: 18MM/SEC PRESSING SPEED: 1.4MM/SEC OPENING SPEED: 20MM/SEC NOISE LEVEL: 62 DBA DIVER: 5.5 KW 3 VAC SIMENE'S TOUCH SCREEN CONTROL PROPORTINAL PRESSURE POSOTONE CONTROL FIYAT: €64,000 DAP DELIVERY ON STOCK

Condition: used, workpiece height max. 2.320 x 1.010 mm Nodpfx Aiew Na Uljqjld output 33 kW Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 Nlodpfownhicsx Aiqsd - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Nlodpfx Aiswun I Eeqod Including full documentation and CE.

Condition: used, Membrane Press - ORMA PM, CE Working dimensions: 2400 x 1000 mm Pressing force: 200 t Heating plates: Yes Double membrane: 1 Principle: Overpressure system Total power: 52 kW Overall dimensions: 3800 x 2000 mm Nedpoxvzahjfx Aiqsld

Condition: good (used), Year of construction: 1991, I sell the heavy duty fourside moulder Weinig Unimat 17 Feeding speed 6,5 - 49 m/min. Nledpfxjf Rtgko Aiqed Working width 170mm Working height 130mm 7 spindles (6+Universal) Configuration: bottom - right - left - right - top - bottom (motor missing) - universal Total power apprx. 33kW Incl. Moulding heads and accessories on photos. Machine suitable mostly for wooden facing, parquettes and floors production. Fully working! Sellable immediately Deffects: broken entry table (can be underlaid like on the photo) 1 pc. Motor for spindle nr. 6 missing

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Njdpjh U Rzgsfx Aiqold Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Njdev D Uhfopfx Aiqeld Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm Nedszlh Auopfx Aiqold For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Nlodpfjtwba Sex Aiqjd Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm Nlsdshryh Hjpfx Aiqed 4400*160 mm 3700*160 mm If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs by providing your postal code, location, and the desired quantity of items. Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale!

Condition: good (used), U-profile for horizontal and diagonal applications 📏 Length: max. 3 meters (cutting to size on request) 🔩 Material thickness: 1.8 mm 📐 Width: 50 mm and 70 mm 🏭 Compatible with: Nedcon, Polypal, Stow, and MPB shelving systems Nledpfouq A Ngsx Aiqsd If you require shelving or accessories in other configurations or designs, please contact us. Shipping: Please inquire about the shipping costs, providing your postal code and city, as well as the desired quantity of items.

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages Nedozpfgfopfx Aiqsld - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, Year of construction: 2026, A set of transport rollers consisting of a WL3 running platform and a WF3 transport chassis. The maximum lifting capacity of the set is 6 tons. Description Transport rollers allow safety and easy transport of heavy items. Thanks to the use the polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL3 size of rollers 85x85 mm number of rollers 4 loading weight 3000 kg loading height 110 mm bearing surface for the element Ø170 mm support points 1 lenght of shaft 950 mm turning angle of shaft ± 90o dimensions (L x W) 270x230 mm weight 12 kg Technical parameters WF3 size of rollers 85x85 mm number of rollers 4 loading weight 3000 kg loading height Nlodpozpx Rdsfx Aiqed 110 mm supporting surface for the elements 150x150 mm support points 2 connector lenght 1000 mm spacing width between rollers 300 - 1000 mm weight 15 kg IMPORTANT NOTICE!!! This is an ex-display set. Only 3 units available. NO WARRANTY!!!

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL9 running platform and a WF9 transport chassis. The maximum lifting capacity of the set is 18 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPORTING POINTS 1 SHAFT LENGHT Nledpfovxrxkjx Aiqed 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 840x583 mm WEIGHT 59 kg Technical parameters WF9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 320x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm WIDTH OF SPACNG ROLLERS 840-1230 mm WEIGHT 34 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL18 running platform and a WF18 transport chassis. The maximum lifting capacity of the set is 36 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL18 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPPORT POINTS 1 LENGHT OF SHAFT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 1030x620 mm WEIGHT 137 kg Technical parameters WF12 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x407 mm SUPPORT POINTS 2 CONNECTOR LENGHT 1430 mm WIDTH OF SPACING ROLLERS 1014 - 1430 mm Nodsvxrzfopfx Aiqsld WEIGHT 50 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL6 running platform and a WF6 transport chassis. The maximum lifting capacity of the set is 12 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL6 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 8 LOAD CAPACITY 6000 kg LIFTING HEIGHT 110 mm BEARING SURFACE OF ELEMENT Ø170 mm SUPPORTING POINTS 1 LENGTH OF SHAFT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 610x520 mm WEIGHT 41 kg Technical parameters WF6 ROLLERS SIZE 85x85 mm Nodpfx Aijvxrwajqsld ROLLERS NUMBER 8 LOADING CAPACITY 6000 kg LIFTING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm WIDTH OF SPACING ROLLERS 640 - 1030 mm WEIGHT 30 kg Manufacturer: Cormak

Condition: used, mileage: 3,85,300 km, power: 353 kW (479.95 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 7,550 kg, maximum load weight: 10,450 kg, overall weight: 18,000 kg, tire size: 315/70R22,5 156/- L, axle configuration: 2 axles, fuel: diesel, color: other, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 315/70R22,5 156/- L, rear tire size: 315/70R22,5 -/150L, Equipment: ABS, air conditioning, all wheel drive, cruise control, navigation system, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Nedszn Nymspfx Aiqeld