Used Perkin Elmer Protome Works System Mass Prep Station for sale (73,939)

Condition: used, This listing is for a Perkin Elmer The Protome Works System Mass PREP Station Robotic Protein Handling System. Bledpfsxzhucex Apvek

Year of construction: 2022, condition: used, Spectrometer for sale, complete set. Excellent condition. The device has not been used and has been serviced. In operation since 2022. Bedpfx Aeyw Rfljpvjlk

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Bjdpfx Ajyluicspvjlk Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Year of construction: 2024, condition: like new (used), PerkinElmer Chemagic 360-D Nucleic Acid Extraction System The PerkinElmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 ml to 10 ml. 24-Rod Head: For sample volumes from 200 µl to 4 ml. 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide range of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy protocol setup, process status tracking (runtime, remaining time), and the generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available for quick and accurate reagent pre-filling, thus reducing manual labor. Dimensions: The device measures 800 x 800 x 900 mm (L/W/H). Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostic use (in combination with the appropriate kits). ``` The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pretreatment of primary samples is required before extraction Bledjyk Upmjpfx Apvjk • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact table design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360-D Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), Compact Instrument for Automated Nucleic Acid Purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all your nucleic acid purification needs. Utilizing proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. ``` Features at a Glance • Optimized design to prevent cross-contamination Bjdpfx Apoyk Uy Sevjlk • Sample volume from 10 µl to 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast DNA purification protocols available • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables quick and easy installation • Easy integration into liquid handling platforms Benefits at a Glance • DNA isolation directly from human whole blood or plasma samples: No primary sample pretreatment is required • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact table design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, This listing is for a Perkin Elmer Lambda 35 Spectrophotometer. The unit is in full working condition and is ready for immediate release. The PerkinElmer Lambda 35 UV/Vis Spectrophotometer offers the best solution for measurement on solids, pastes and powders. It supports Double-Beam Operation. Variable bandwidth is from 0.5 nm to 4 nm. LAMBDA systems are easy to operate and deliver results that you can trust,with minimal training for operators. Using LAMBDA system, it’s easy to develop simple, robust methods and make sure you follow them without making mistakes. And, no matter what LAMBDA system you choose, your daily UV/Vis analysis will be faster, simpler, and more reliable than ever. Wavelength range: 190-1100 nm Weight: 25 kg (57 lbs.) Bjdoxx Axwjpfx Apvjlk Wavelength absorbance range: 3 to 4 A Wavelength accuracy: ±0.1 nm Stray light:

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Bledjxhfc Rjpfx Apvek Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: Bsdeuzylhepfx Apvelk 3 pallets with 2 polishing machines & 1 control cabinet

Condition: used, Year of construction: 2009, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Bodpfx Apjh Axrrjvolk Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min Bodjq Rx Srjpfx Apvslk PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2009, condition: ready for operation (used), total width: 780 mm, total height: 1,600 mm, laser power: 20 W, product length (max.): 960 mm, number of axes: 3, This 3-axis Trotec Laser-Work-Station was manufactured in 2009. It features a powerful 20 W Nd:YAG / Pulsed Yb Fiber Laser with a marking field of 110 × 110 mm and a Z-axis travel of approximately 400 mm. The machine is designed for various applications including laser marking, engraving, and part identification. If you are looking to get high-quality laser marking capabilities, consider the Trotec Laser-Work-Station machine we have for sale. Contact us for further details. • Machine Type: Fiber Laser Marking Machine • Model: Laser-Work-Station • Laser System: SpeedMarker FL20 • Laser Type: Nd:YAG / Pulsed Yb Fiber Laser • Wavelength: 1064 nm • Laser Power: 20 W • Laser Safety Class: Class 2 (Enclosed Workstation) • Marking Head: Galvanometer Scan Head • Lens: F-Theta 160 mm • Marking Field: 110 × 110 mm • Working Distance: Approx. 200 mm • Focus Diameter: Approx. 40 µm • Pulse Frequency: 20–80 kHz • Pulse Width: Approx. 100 ns (@ 20 kHz) • Maximum Pulse Energy: 1 mJ (@ 20 kHz) • Beam Quality: M² ≤ 1.5 • Z-Axis: Electric • Z-Axis Travel: Approx. 400 mm • Maximum Workpiece Height: Up to 250 mm • Work Area: Approx. 400 × 400 mm • Worktable: T-Slot Plate • Automatic Safety Door • Dual Laser Pointer Focus Finder • Interior Workspace Lighting • Swiveling Monitor Arm • Operating Voltage: 230 V AC, 50/60 Hz • Total Power Consumption: < 500 W • Laser Unit Power Consumption: < 300 W • Cooling: Air-Cooled • Fiber Delivery Cable Length: 2 m • Operating System: Windows XP Professional • Control PC: Industrial PC • Processor: Intel Pentium 4, 3.0 GHz • Software: SpeedMark • 24 V Digital I/O Interface • Supports Barcode Marking • Supports 2D Data Matrix Codes Bedpszibpiefx Apvjlk • Supports Text Marking • Supports Date & Time Marking • Supports Vector Graphics Import • Supports Bitmap Graphics Import • Suitable Materials: Steel, Stainless Steel, Aluminum, Brass, Gold, Coated Metals, Plastics, Ceramics • Applications: Laser Marking, Laser Engraving, Part Identification, Serialization, Barcode & Data Matrix Marking, Logo Marking, Industrial Traceability

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. Bedpfxey Anhzj Apvslk This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Year of construction: 2025, condition: new, functionality: fully functional, table height adjustment: 300 mm, Equipment: USB port, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. A solid adjustable table with the possibility of adjusting the worktop height is an ideal solution for demanding users. Adjustable worktop height: mechanical, reliable height change allows you to adjust the work station to individual needs, ensuring ergonomics and work comfort. Worktop adjustable in the range of approx.: 760-1130 [mm] The height of the worktop and tool board is adjusted mechanically using the included folding crank or any screwdriver. Solid construction: Made of the highest quality materials, it guarantees stability even with uneven load. Load capacity up to 500 kg: The table is designed for working with heavy tools and materials, ideal for intensive use. Mobility: Extendable wheels allow easy movement of the work station in the workshop, without compromising stability during work. Lighting: Equipped with a professional lamp with adjustable light intensity, adjusted locally using a knob or through the building management system. As standard, the table is equipped with lighting in the Dali system. Electrical panel: standard emergency button, three 230V sockets and a lighting intensity controller, which increases functionality and work safety. An additional fourth socket is located under the table top. Bsdpfx Apown Da Dovelk Tool board: Perforated board allows convenient organization of tools, helping to maintain order at the workstation. As a renowned manufacturer of workbenches, Karnatech offers a 100% Polish product, characterized by the highest quality of workmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. We also have more budget workstations without the possibility of lifting the worktop in various versions. Workstations designed and manufactured in the EU.

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Bljdpfxov Tdkbj Apvjk Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition

Condition: good (used), Soco System Packing Station System 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Bsdpfx Apexl Rn Tjvelk Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Storage shelf Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping available upon request!

Condition: used, This listing is for a Qiagen QIAgility PCR Prep System Blsdpjxzgxgsfx Apvjk

Condition: used, This listing is for a Qiagen Qiagility PCR Prep System. Bjdpoxx Axqefx Apvjlk The unit is in full working condition and is ready for immediate release. The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, bench-top liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and lab ware. HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Pipetting head: Single-channel Precision: CV

Condition: excellent (used), Soco System One Man Packing Station Mobile box erector Carton case sealing machine Top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic rollers, roller width: 670 mm Bledpfshlp Nxsx Apvjk Height adjustable legs Total dimensions: 1030 mm x 810 mm x 1660 mm.

Condition: used, Year of construction: 2010, input voltage: 230 V, laser power: 20 W, scan area length: 110 mm, scan area width: 110 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table length: 300 mm, table width: 400 mm, laser wavelength: 1,064 nm, working height: 300 mm, input frequency: 50 Hz, working width: 400 mm, We are offering this used Trotec laser workstation engraving machine, manufactured in 2010. Designation: Laser Workstation Version: Laser safety class 2 Laser type: Nd:YAG Wavelength: 1064 nm Year of manufacture: 05-2010 Bsdpfxozph Tuj Apvjlk Reference number: LWS_2475 Connection voltage: 230 V Frequency: 50 Hz The laser has been replaced by a model with a larger processing area. Processing dimensions: 300 mm x 400 mm x 300 mm (L x W x H) Marking area: 110 mm x 110 mm The laser source was renewed one year ago. 20-watt fiber laser. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SENFENG, laser type: fiber laser, laser source manufacturer: MAX, laser power: 1,200 W, laser wavelength: 1,080 nm, sheet thickness (max.): 12 mm, table length: 600 mm, table width: 600 mm, table height: 50 mm, working length: 600 mm, working width: 600 mm, working height: 50 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 50 mm, cutting speed: 500 mm/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, input voltage: 220 V, input frequency: 50 Hz, type of cooling: air, overall weight: 151 kg, total length: 1,110 mm, total width: 1,205 mm, total height: 775 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SENFENG Tools D-Series – 7-in-1 Desktop Laser Workstation The SENFENG Tools D-Series is a compact, multifunctional laser workstation for workshops, small manufacturing companies, repair shops, creative studios, metalworking businesses, and professional users who want to combine multiple processing steps in a single system. The D-Series combines CNC laser cutting, CNC laser engraving, diode laser cutting, diode laser engraving, handheld laser welding, handheld laser cutting, and laser cleaning and rust removal. This reduces external processing costs, saves space, and expands production capabilities within the company. Depending on the configuration, the series is available with 800W or 1200W fiber laser power, as well as an optional diode laser. The dual-laser system enables the processing of both metals and non-metals: the fiber laser is designed for cutting, welding, and cleaning metals, while the blue diode laser can cut or engrave wood, acrylic, leather, and other non-metals. Key advantages: • 7-in-1 laser workstation for cutting, welding, cleaning, and engraving • Up to 1200W fiber laser power • Optional fiber laser and diode laser system • Max. cutting thickness: carbon steel up to 12 mm, wood up to 25 mm • CNC processing speed up to 500 mm/s • Repeat accuracy up to ±0.01 mm in Ultra-Cut models • Fully enclosed work area with integrated smoke extraction • Graphite protective plate with drawer design • Laser head change in approx. 30 seconds • Intelligent height following function, edge detection, and obstacle avoidance • Common edge cutting for better material utilization • Control via PC, mobile device, or touch panel Blsdezfhn Rjpfx Apvsk Available variants include D300 and D600 Welder, D300 and D600 Combo, D300 and D600 Combo Pro, and D300 and D600 Ultra Cut. The D300 models are designed for compact workspaces, while the D600 models offer more power and a workspace of up to 600 × 600 mm. For handheld laser welding, the machine supports continuous welding, spot welding, and pendulum welding. Depending on the model, the welding thickness ranges from 0.2 to 4 mm or 0.2 to 5 mm. The air-cooled system is designed for flexible use in workshops and does not require extensive industrial infrastructure. The Combo and Combo Pro versions combine CNC automation with handheld processing. Users can flexibly switch between precise CNC processing and manual processing. Typical materials include stainless steel, carbon steel, aluminum, brass, galvanized steel, wood, acrylic, leather, and other suitable materials. The fully enclosed safety design creates a visible and protected work area. Emergency stop, smoke extraction, and a mechanical laser selection switch support safe and clean operation. Depending on the model and market version, the D-Series has CE, FDA, FCC, and other relevant certifications. Typical users include metalworking shops, automotive repair shops, custom fabrication studios, small-batch manufacturers, signage and engraving companies, wood and creative workshops, educational institutions, and teams for prototype construction and product development. The SENFENG Tools D-Series is a compact solution for users who want to handle more tasks internally with a single machine – from laser cutting to engraving, welding, and cleaning.

Year of construction: 2022, condition: new, Layout: Crusher Attachment suited for: Construction machines GALEN Stationary Pedestal Boom System is a hydraulically operated mechanical arm fitted with hydraulic breaker. When Stationary Pedestal Boom System mounted in close proximity to the primary crusher it allow blockages to be removed and obstructions to be cleared. Blodpfx Apjpa Rpfovsk For detailed information and quote please contact us

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 560123, functionality: fully functional, volume flow: 16,000 m³/h, total length: 12,000 mm, total width: 2,400 mm, Equipment: CE marking, TECHNICAL DETAILS Capacity: 16,000 m³/h Number of filter bags: 180 pcs Connection diameter: 600 mm Main fan: 22 pcs MACHINE DETAILS Dimensions (L x W): 12,000 x 2,400 mm Bledpfxoyh Nyfo Apvsk EQUIPMENT CE marking

Condition: new, Year of construction: 2026, functionality: fully functional, LP-UP 3000 – Intelligent Automation System for Drilling and Double-Sided Edge Banding Machines The LP-UP 3000 is a high-speed intelligent automation system designed to automate panel loading, unloading, and material handling for drilling machines and double-sided edge banding lines. Its flexible design allows it to be integrated with machines from virtually any manufacturer, making it suitable for both new production lines and existing machinery. The system automatically transfers and positions panels, reducing manual handling, operator requirements, and production waiting times. With a processing capacity of up to 20 panels per minute, the LP-UP 3000 provides a continuous and highly efficient production flow. It is an ideal solution for furniture and panel-processing manufacturers looking to increase productivity, reduce labor dependency, and automate their production lines. Main Features: * Compatible with drilling and double-sided edge banding machines * Can be integrated with virtually all machine brands * Automatic panel loading, unloading, and transfer * Intelligent and flexible production control * Reduces manual handling and operator requirements * Suitable for integration into existing production lines Blodpezp N Uajfx Apvok * Increases production speed, consistency, and overall efficiency

Condition: new, 3 waste bags Blsdpfjzqa Tijx Apvok capacity 8000 m3/h motor power 7.5 kW bag shaking mechanism air return channel power supply 380V

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck Bedsyaq Nujpfx Apvjlk - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us.