Used Petratto Metro Sd 78 for sale (2,916)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Refurbished, with new rollers, bearings, and belts Itedsy Eda Sjpfx Ab Ssl AVAILABLE: IMMEDIATELY LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 0112-196, type of input current: three-phase, total width: 115 mm, total length: 400 mm, total height: 100 mm, input voltage: 400 V, Petratto Mini Metro 78 modular folding and gluing system (2021), consisting of two identical modules. Iodpfezp Nkuex Ab Sotl The machine has been lightly used and is in excellent condition. It consists of two Mini Metro 78 modules, providing a flexible configuration for a wide range of folding and gluing applications. The system is equipped with various accessories and tooling for folding and gluing, making it suitable for the production of presentation folders, sleeves, wallets, envelopes, cartons and many other paperboard converting applications. The modular design allows different configurations depending on the job requirements. The machine has been well maintained, is fully operational, and is ready for production. It is being offered for sale only because we have had very limited demand for this type of work.

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Iedpfxsy N Ddxj Ab Sotl

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Itodpsy N Dd Ssfx Ab Sel

Condition: used, Year of construction: 2019, Petratto DP66 Pressing Machine, used The Petratto DP66 is a professional pressing machine specifically designed for use in print finishing. It impresses with its robust construction, modern controls, and high flexibility when processing various paper formats and thicknesses. The machine is ideal for print shops and bookbinderies that value precision, reliability, and efficiency. Key Features - Robust industrial design for continuous operation - Easy operation via a clear control panel with emergency stop, start/stop, and program selection buttons - Digital control with display for precise settings and programming - Flexible feeder for various paper formats and thicknesses - Safety features such as emergency stop switch and protective covers - 400V connection for powerful operation - Year of manufacture 2019, ensuring modern technology and current safety standards Technical Specifications - Manufacturer: Petratto Srl, Italy - Model: DP66 - Type: 66 Isdpfew Evd Asx Ab Sjtl - Year of manufacture: 2019 - Power supply: 400 V - Control panel: Digital, programmable - Safety equipment: Emergency stop, protective covers - Application: Pressing tasks, further processing of paper All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. Iodpfx Ajzzk Rmjb Setl The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 12,04,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, Iodpfx Aszmh Awjb Sstl - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. Itodpfx Aozyrpnob Sol The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: as good as new (ex-display), Year of construction: 2018, Very little used , condition as new ! FORMAT 45 X 90 CM FEEDER: Pile feeder with vacuum belt and automatic device for cleaning the valve. It is equipped with air blasts for spacing the sheets, when there is no suction. Front and side blowers for separating the sheets. Height, positioning, quantity and volume values are all adjustable. LAY REGISTER TABLE: Lay register table with round belts, in lower and upper position, anti-scratching for UV-coated and laminated sheets. CREASING: Die creasing. Easily replaceable matrixes thanks to a bayonet system that enables quick changes in creasing width (Optimum creasing with all paper grammages). DELIVERY: Itsdpfx Absxwp N Hs Sjl Delivery table for hand collection PROGRAMMING – CONTROLS: Colour programming touch screen. Digital programmer to set creasing positions and all machine data. Jobs storage. Copy counter. Output counter. Programmable copy divider (batches).

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) Itodpfx Ajzydafsb Ssl - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Iodpfxjzy Ndcs Ab Setl Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2009, Folding & Creasing machine Iodpfxex Ndy To Ab Setl Petratto Cordoba 3 Year: 2009 Knife Creasing and Folding Machine Description: - Feeder: Horizon - RFU-54 - Creasing station - Excl. glue unit - Buckle folding section with 3 buckle plates - Delivery with pressing: PGN 66 - SC10 type 500

Condition: ready for operation (used), Bosch SD-B4.180.020 servomotor SN: 563000785 with built-in ROD 426.029B-2500 / 281 464 08 - Z-No.: 1 909 713 SN: 5500204, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itsdpfx Asy Nn Nfeb Sel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,688 h, functionality: fully functional, machine/vehicle number: G3138-0826, turning diameter over cross slide: 375 mm, turning diameter: 590 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 750 mm, controller model: Fanuc 21i-T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Isdpszza Uuofx Ab Sjtl Spindle speed max.: 3,000 rpm Turning diameter over bed: 590 mm Turning diameter over slide: 375 mm Distance between centers: 750 mm Spindle bore: 78 mm Travel in X-axis: 220 mm Travel in Z-axis: 750 mm MACHINE DETAILS Control model: Fanuc 21i-T Power: 22 kW Operating hours: 1,688 h Shipping weight: 6,100 kg EQUIPMENT Three-jaw chuck Chip conveyor Turret CE marking

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Process and Feeding Low rotational speed Single-screw feeding system Itsdpozzp I Rsfx Ab Sjl Gentle processing of raw materials Preservation of fiber and texture in the end product Application Area Suitable for red meat, poultry, pork, fish, fruits, and vegetables Machine Design Compact design with a small footprint Control elements mounted directly on the machine Versatile for use with different raw materials Product Quality Gentle separation for a high-quality, minced end product Preservation of fibers and texture EQUIPMENT Control unit arranged directly on the machine Single-screw feeding system Compact machine construction

Condition: used, Year of construction: 2014, Surface grinding machine, Geibel + Hotz, type FS 420 SD. Itedpfxez Affue Ab Sjl

Condition: used, maximum load weight: 32,228 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2017, Year of construction: 2017, Equipment: ABS, * Krone SD Standard semi-trailer * First registration: 06-2017 * Etscha canvas cover Iedpfez Dqraox Ab Setl * Krone axles * Tires approximately 70% tread * Tires 385 / 65 R 22.5 * Air suspension * More pictures and videos available via WhatsApp * Information provided without warranty and subject to prior sale.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top Itedjzv Eaxepfx Ab Ssl 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: good (used), Weidmüller RS-DIN 117836 Modul Itsdpfsvx T Itsx Ab Sjl

Condition: good (used), Year of construction: 2007, operating hours: 37 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,750 mm, controller manufacturer: ABB, controller model: 66-55293 (IRC5 Dual), teach pendant manufacturer: ABB, teach pendant model: FlexPendant, input voltage: 400 V, Equipment: documentation/manual, For sale: Complete industrial robot system, ABB IRB 6600-175, with IRC5 controller cabinet. Properly stored, wrapped, and secured on a pallet. • Manufacturer: ABB • Model: IRB 6600-175 • Year of Manufacture: 2007 • Payload: 175 kg • Controller: ABB IRC5 • Includes: Robot arm, IRC5 control cabinet, FlexPendant, and interconnecting cables. • Applications: Material handling, palletizing, machine tending, heavy assembly. Serial No. 66-55296, IRC5 Dual Controller, 37,114 operating hours. Isdszqdy Hjpfx Ab Sstl

Condition: used, Year of construction: 2023, Offered for sale is a self-adhesive labeling machine. Nominal output: 11000bottles/h, reference circle diameter: 720mm, control range: 2000 to 12000bottles/h, number of container plates: 12, pitch: 188.4mm, starwheel diameter: 480mm, starwheel pitch: 8, number of self-adhesive labeling stations: 2, direction of operation: left-hand machine, control: touch panel. Equipped with infeed screw 1x, infeed/outfeed starwheel 1x, bottle plates 1 set, centering hoods 1 set, swivel arm, free-standing control cabinet. Inspection possible by appointment. Ijdpfx Aszzdybeb Sotl

Condition: used, Surface grinding machine ELB type SW 3 HA Juwel Machine no. No. 51810465 Year of construction 1965 Sanding area 300 x 150 mm Clamping surface 300 x 150 mm Electromagnet 300 x 150 mm Distance spindle center - magnet approx. 350 mm Grinding wheel diameter 175 mm Grinding wheel width max. 25 mm Grinding wheel speed 2800 rpm Grinding spindle drive 0.75 kW Mains connection 380 Volt, 50 Hz. - Manual and automatic table cross adjustment (0.02 mm per graduation mark) - Manual cross adjustment via handwheel, travel per handwheel rotation, Y-axis 2 mm Itedettc T Depfx Ab Sel - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 0.2 mm - Longitudinal table movement via electric motor with 2 speeds - Grinding wheel extractor - Electromagnet type SD 15/30 Height = 78 mm - Lubrication pump for the table guide in the machine base - Wet grinding unit with pump opposite - Electric box Electromagnet for wall mounting - Operating instructions - Machine light Space requirement L x W x H 1250 x 1100 x 1950 mm Weight approx. 920 kg good condition

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 1,910 mm, total length: 4,400 mm, total width: 1,640 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Fine finishing and intermediate sanding of profiled individual parts in window construction, with automatic profile change in seconds. The soft-disc units create a homogeneous, matte surface and even out the growth rings, particularly effective with spruce. Brushing rollers work in a longitudinal direction, and four-sided units process rebates, overlaps, and profiles. The automatic immersion system prevents over-sanding of end-face edges. Technical specifications: Workpiece width: max. 180 mm (230 mm for folding) Iodpfx Aszv Rfgjb Sstl Workpiece thickness: 12 to 120 mm Year of manufacture: 2025 Weight: 1,700 kg 400 V, 50 Hz, 26 A, fuse rating 35 A Directly from the manufacturer; inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: - L 90º: 130x130x13mm Itedpfxjznh Shs Ab Ssl - Plate: 450x13mm - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: SD1-160-0030, functionality: fully functional, operating hours: 7,000 h, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 220 mm, operating speed: 720 mm/s, reverse speed: 720 mm/s, table width: 760 mm, table length: 1,150 mm, table height: 940 mm, throat depth: 410 mm, ram plate width: 580 mm, ram plate length: 900 mm, distance table to ram: 400 mm, clearance between the columns: 1,300 mm, oil tank capacity: 70 l, total length: 2,557 mm, total width: 2,161 mm, total height: 3,502 mm, overall weight: 20,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: SEYI SD1-160 Servo Press Iodpfxsz Dg I De Ab Sjtl The SEYI SD1-160 is a high-performance straight-side servo press designed for precision metal stamping, forming, blanking, and progressive die applications. With a 160-ton capacity, advanced servo drive technology, and a highly rigid frame construction, this machine delivers exceptional accuracy, productivity, energy efficiency, and process flexibility. The servo-driven ram allows fully programmable slide motion profiles, enabling optimized production cycles, improved part quality, reduced tooling wear, and lower energy consumption compared to conventional mechanical presses. It is well suited for automotive, electronics, appliance, and general metal forming industries. The machine features a robust straight-side frame, precision-guided slide system, integrated tonnage monitoring, programmable motion curves, die memory functions, and a user-friendly touchscreen control interface.