Used Pratt Burned Pratt Burned for sale (325)

Condition: good (used), chuck outer diameter: 310 mm, Metal cutting Tooling PRATT BURNED Gbsdozdigbepfx Ab Tsr MACH-ID 2999 Diameter: 310mm 4 chuck: x Spindle bore:74mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, three-jaw chuck diameter: 455 mm, through hole: 115 mm, Metal cutting Tooling Gsdpfxjzdic As Ab Tjbr PRATT BURNED MACH-ID 3005 Make: PRATT BURNED Year: 1990 Diameter: 455mm 3 Chuck: x Spindle bore:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Weight: 8 kg Siegfried Volz Werkzeugmaschinen Gjdpfx Aew Elp Ijb Tebr Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm Gsdpfx Aozmy Tbsb Tjbr

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Gbsdpfx Asg R Sh Aeb Tsr Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Gsdowm Htqspfx Ab Tobr Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE, MODEL MTX 1500/3000 Gedpjh Rabnsfx Ab Tobr Construction: steel + aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive, dual-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks, accuracy class 8 Z-axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z-axis control system: THC My plasm system Collision protection system, protecting the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Allowable load: 1700 kg Total weight: 1200 kg net INCLUDED: - control panel - water table - interchangeable grate - control program in German, English, and Polish - CE declaration of conformity - technical documentation - warranty Option to select a suitable Hypertherm cutting unit to meet the specific needs of the company.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2000/6000 Construction: steel + aluminum Working area: 6200/2200/1400 XY axis drive, double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion gears, accuracy class 8 Z axis drive: stepper motor, ball screw Double aluminum beam with a special cross-section ensures stiffness and durability Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI Automatic material detection system Power supply: 240V Allowable load: 3000 kg Total weight: 2500 kg USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion gears, accuracy class 8 Y axis: stepper motor and rack and pinion gears, accuracy class 8 Z axis: stepper motor and ball screw Drives implemented using TBI 20 brand rails Table equipped with a water table - low operating costs (Water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY - THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFE, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS Gjdpeiphrtsfx Ab Tebr HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMS ADVANCED THC MY PLASM FOR SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE INSTALL CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH LEASING ARRANGEMENTS Possibility to select a suitable cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2023, condition: new, CNC PLASMA CUTTER, ProMax Professional series TECHNICAL SPECIFICATIONS Working width: 1500 mm Working length: 3000 mm Travel speed: up to 50 m/min KEY FEATURES DELTA servo drives X-axis carriage with dual rails Fast START – machine preparation for cutting in under 1 minute Gbsdsipht Rjpfx Ab Tjr Planetary gearboxes Helical bevel gears, class 6 Touchscreen monitor with industrial computer Remote control Sectional extraction table with pneumatic actuators CS anti-collision system – protects the torch from collisions CLS central lubrication system Dual Y-axis support Laser pointer indicating the torch position SC system – safety system We also offer tables with different dimensions.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 XY axis drive: double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion Z axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files via external pen-drive Sheet detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion Y axis: stepper motor and rack and pinion Z axis: stepper motor and ball screw Drives implemented using TBI HGR 20 rails Table equipped with a water table (water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) INCLUDED: - water table - replaceable grating - control program in Polish - CE declaration of conformity - technical documentation - warranty - commissioning and training included in the price The latest control system available in our cutters: Integrated THC height regulator Anti-torch dive function Accepted file types: DXF, PLT (hpgl), G-Codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Cutting parameter database Project angle correction to material Ability to cut from any location Ability to cut from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to the material layout angle Soft and Hardware limits THC anti-dive functions Game Pad control possible Material detection via touch system, floating head WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY; THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFESPAN, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS Gjdpfxsiphrlj Ab Tsbr HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUSCEPTIBLE TO DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET CUSTOMER REQUIREMENTS WE HELP IN ARRANGING LEASING Possibility to select the appropriate cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Gbedpfx Abeiphu Is Tjr Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Gbsdpfjd I T Exsx Ab Tsr

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the fence Gjdpfx Abjzq Ez Sj Tobr

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets Gedpoyxn Rnsfx Ab Tsbr • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: new, Year of construction: 2026, Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even when the wire processed is of a very small diameter. Products can be used for cages, fencing, etc. Gjdjd Rlaiepfx Ab Tsbr Features: Line & cross wire feeding from coil Edge trimming Mesh fabric slitting Fully or semi automatic system for mesh cutting, rolling & ejecting Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life Specifications Model PE2100 PE2600 PE3100 Mesh Width (mm) 2100 2600 3100 Min Line wire spacing (mm) 25 25 25 Min Cross wire spacing (mm) 12.5 12.5 12.5 Range of wire diameter (mm) 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 Working speed (strokes/min) Up to 160 Up to 150 Up to 130

Condition: new, Year of construction: 2025, STARWELD PO is a high performance mesh welding line for the production of medium & heavy weight wire or reinforcing mesh panels. It is a line appropriate for big production needs. Design is made in accordance to the specific project & mesh type parameters – e.g. there can be a rolling mechanism for the machine to produce rolls too if so desired. PRATTO can supply all the necessary auxiliary equipment. Products can be used in the construction industry. They are also used for shelves, grids, cages, pallets and containers as well as for fencing (plain & bent). Features: Line wire feeding from coil Cross wire feeding from coil Edge trimming (optional) Panel stacking (optional) Gsdpfxjd Rlals Ab Tebr Panel tilting (optional) Rolling mechanism (optional) Bending unit (optional) Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: new, Year of construction: 2026, Features: Godpfxef Ar N Uj Ab Tjbr Line & cross wire feeding from pre-straightened and cut bars Automatic feeding of cross wires from hopper Manual feeding of line wires Automatic Panel stacking Excellent mesh accuracy Fully or semi-automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: new, Year of construction: 2026, STARWELD POBH is an advanced version of our high-performance mesh welding line, designed to produce high-quality wire mesh 3D fences, including Eurofence and “V”-shaped fence designs. This model is equipped with a bending unit that allows for precise shaping of wire mesh, making it an ideal choice for various fencing projects. Bending Unit: The integrated bending unit empowers STARWELD POBH to effortlessly shape wire mesh into Eurofence or “V”-shaped fence patterns with precision. This feature enables you to meet the demands of diverse fencing projects with ease. High-Quality Output: Expect nothing less than exceptional quality from STARWELD POBH. Whether you’re crafting aesthetically pleasing Eurofences or robust “V”-shaped fences, our model ensures each piece meets the highest industry standards. Tailored to Your Needs: Just like its predecessor, STARWELD POH, this model is customizable to your specific project and mesh type parameters. We can adapt the design to suit your unique requirements, ensuring optimal performance and results. STARWELD POBH is not only ideal for the construction industry but also finds its utility in crafting shelves, grids, cages, pallets, containers, and, of course, fencing. Its ability to create intricate 3D fence designs makes it a standout choice for projects that demand both functionality and aesthetics. Elevate your wire mesh production capabilities with STARWELD POBH, where innovation meets precision to redefine the art of fence manufacturing. Contact us today to discuss how STARWELD POBH can transform your fencing projects into works of excellence. Gsdpfx Aod Rlaneb Tjbr

Condition: new, Year of construction: 2025, STARWELD GR is a high performance mesh welding plant for the production of electro-fused grating. A big product range can be achieved through its easy adjustments. Special designs can be adopted according to the customer needs (special technical specifications or special products). Products can be used for stairs, floorings, catwalks, platforms, fencing, etc. Features: Gsdod Rlapepfx Ab Tsbr Feeding from coil or pre-straightened and cut bearing bars Automatic or manual feeding of flat steel bearing bars Automatic feeding of round or twisted-square cross bars from coils or hopper Various bearing bar spacings: 22, 25, 30, 34 mm or different on demand Very effective grating flattening mechanisms Cross bar automatic edge trimming Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: good (used), Manufacturer: Systema Gbjdpfxei D Dkae Ab Tsr Type: H100

Condition: good (used), Manufacturer: Systema Gbsdpfxei D Dkdo Ab Tsr Type: H100

Condition: excellent (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt WM GL20 brand, including gas piping (Dungs DN 1). Gbjdey Urrzepfx Ab Tjr Burner type: WM GL20/3-A Output: 250 - 2450 kW Design: ZM-R Year of manufacture: 2013 Connection pressure: 15-500 mbar

Condition: good (used), EKU C9F-6GS 6-Burner Natural Gas Range Cooktop (Gas Burners) Number of cooking zones: 6 independent gas burners. Burner configuration: Split into two power classes to accommodate various pot sizes: 3 x small/medium burners: 3.5 kW each (burner head Ø approx. 80 mm) 3 x high-output burners: 6.0 kW each (burner head Ø approx. 110/120 mm) Total cooktop output: 28.5 kW gas power. Features: Cast-iron pan supports (sliding grates) and thermoelectric flame failure device on every burner for maximum operational safety. Oven (Base Unit) Type: Large-capacity gas oven (static heating) with piezoelectric ignition. Oven output: Approx. 8.0 kW to 9.0 kW burner power. Internal dimensions: Compatible with Gastronorm racks and trays (GN 2/1). Temperature range: Adjustable from 100°C to 300°C via a safety gas thermostat. Connection Specifications Total connected load (gas): Approx. 36.5 kW to 37.5 kW (combined cooktop and oven). Gas type: Factory-set for natural gas (20 mbar) (convertible to LPG/propane via nozzle replacement). Gas connection: R 1/2" or R 3/4" thread. Dimensions and Weight External dimensions: Approx. 1200 mm (width) x 900 mm (depth) x 850 mm (height) – compatible with the standardized 900-series commercial kitchen modular range. Material: Housing and cover made entirely of stainless chrome-nickel steel (CNS / stainless steel) Gbsdpsztkf Iofx Ab Tjr "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Including gas line ( gas fitting ) Gsdpfx Abjmdpczj Tjbr Burner was recently in operation

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. Gbedpfx Abszcg Hze Tjr 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.