Used Presona Lp 85 Vh2 for sale (4,798)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Laodpfxoyz Snps Afuoc Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Laodpov T I Evefx Afujc Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Lasdpfx Afsyrhi Nsuec Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Ledezdny Rjpfx Afueac Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Ledpszdnxgsfx Afusac Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Lajdpsymmmpefx Afuec Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), We are offering you a used shelf connector from the manufacturer Jung Heinrich for sale. Technical data for the shelf connector: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Used shelf connector Material color: Sendzimir galvanized Shelf spacing: approx. 200 mm Lsdpfx Aod Tt Afjfuoac L-profile: approx. 85 x 40 mm Weight/piece: approx. 0.519 kg / piece 04x Hex head screws, M8 x 20 8.8 04x Hex nuts, M8 04x Washers, M8

Year of construction: 2016, condition: used, PU-1197-Rectangular Vat-9,000L Horizontal rectangular stainless steel vat. Jacket pressure 3 bar, test pressure 4.5 bar Lodpfx Afjwuthqoujac Capacity 9,000 L. Dimensions: L: 8,000 mm, W: 1,350 (1,536) mm, H: (1,050) 1,235 mm AISI 304

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, serial number: VPW7857742, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfji Edgtsx Afuoac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPW7857746, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpfxsi Edgws Afuec

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPWN854125, Serial No. as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfji Edg Nox Afujc

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPW7857747, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Afei Edgzoujac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch, DC 24V Industrial Power Supply, SN: VPC3857694, Serial No. as shown in the photo, used – in excellent condition, 100% functional, scope of delivery as shown in the photos. Lodpfxoi Edhbj Afusac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPC3851071, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfxsi Edgds Afujac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch, DC 24V Industrial Power Supply, SN: VPW7857741, Serial No. as per photo, used – in excellent condition, 100% functional, scope of delivery as per photos. Ledpfoi Edgpsx Afusac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPW7857748, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfji Edg Eex Afusc

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPX8854249, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfx Afsi Edg Tjusc

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPW7857744, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Aei Edgaefuoac

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPC3857693, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpfx Afei Edghjusc

Condition: ready for operation (used), Sill Optics T85/0.14 / S5LPJ6030/AAA telecentric lens, used, normal signs of use, 100% functional, scope of delivery as per photos Laedpfxsxahzae Afuec

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPC4850244, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as per photos. Laedpfxji Edgls Afusc

Condition: good (used), We are offering for sale a used compensation plate from the manufacturer Polypal. Laedog Siiqjpfx Afusc The scope of delivery includes: 1x compensation plate, used Manufacturer: Polypal Type: SKUP Material color: Sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Weight/piece: 0.119 kg

Condition: good (used), Technical data for the pallet racking upright: Racking system: Hovuma Included in delivery: 01x Pallet racking upright, used Material color: cream white Profile dimensions: 85 x 50 x 17 x 3.0 mm Lodpjkwdd Esfx Afuoac Profile type: C 808 S275 Includes cross and diagonal braces, Base plates The uprights are pre-assembled (welded frame) 6,640 mm high 870 mm deep

Condition: good (used), Technical specifications for the balancing plate: Manufacturer: Polypal Included in the scope of delivery: 1x balancing plate, used Overall width: approx. 130 mm Overall depth: approx. 85 mm Material thickness: approx. 1.50 mm Laodpji Hkm Ujfx Afusc Bore hole diameter: approx. 15 mm Number of bore holes: 2 pcs. Weight: approx. 0.12 kg | per piece

Condition: good (used), We are offering for sale a used rear wall grille holder. The scope of supply includes: 01x Rear wall grille holder, used Material color: Sendzimir galvanized Dimension leg A: approx. 115 x 85 mm Dimension leg B: approx. 50 x 85 mm Distance to rear wall grille: approx. 85 mm Elongated hole dimension: approx. 21 x 10 mm Lsdpfx Aogyfxpjfusac Distance center-to-center of holes: approx. 50 mm Weight/piece: approx. 0.403 kg Shipping costs upon request.