Used Promau 4R 30/D for sale (62,896)

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Njdpfx Abjzhw Tus Uedb

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Nedpfx Abehyuche Uedb

Condition: used, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Nedsu U D Ahepfx Ab Ujdb

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 12,199 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,730 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 40 - 60% Njdpfxez El A Nj Ab Uedb Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, partial cabin

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Ndsdpfsg U H E Ssx Ab Usb Wöhr Flow Oil Cooler Type D 20 V, Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Nedpfx Abjrzhfho Usdb Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Ndjdpfx Ajrzhftjb Ujb Programming and control system

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle Ndjdpfx Aozux Tpeb Ueb - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: excellent (used), Year of construction: 2011, volume flow: 3.21 m³/h, operating pressure: 8 bar, pressure (min.): 10 bar, Boge C 30 D screw compressor With desiccant dryer 22 kW motor Ndedpfxoywz Hme Ab Usb Capacity: 3.21 m3/min Pressure: 10 bar Year of manufacture: 2011 Operating hours: 16,300 hours COMPRESSOR IS IN FULLY WORKING CONDITION. NET PRICE: 14,000,- GROSS PRICE: 17,220,-

Condition: excellent (used), Year of construction: 2024, operating hours: 725 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 54 kW (73.42 HP), motor manufacturer: Perkins, total height: 2,690 mm, total length: 3,500 mm, total width: 1,930 mm, color: other, Equipment: all wheel drive, General information Year of manufacture: Feb 2024 Registration number: T-93-GBJ Technical information Number of cylinders: 4 Engine capacity: 2.925 cc Empty weight: 5.965 kg Wheelbase: 200 cm Functional Lifting capacity: 3.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: France Ndjdpfezxbggex Ab Uob Condition CE type: CE 1800 mm wide fork carriage, side shift, 4th hydraulic function, Freelift - triplex mast, Dutch license plate

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 9 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 130 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: New Front tire type: Superelastic Front tire size: 28X9-15 Rear tire type: Superelastic Rear tire size: 6.50-10 Ndedpfx Ajvla S Sjb Ueb Fork positioner, 3rd valve, 4th valve, front work light, roof protection, soot filter, full cabin, CE certificate, safety light. Image serves as a symbolic representation.

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Njdpsqvnl Tsfx Ab Ujdb

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions Ndodpozubtlefx Ab Uob • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,000 kg, total length: 12,500 mm, total width: 5,600 mm, machine/vehicle number: 0-280-15-2017, We offer a used, automatic, two-chamber loading station from the renowned BARGSTEDT brand, model RTBH22/D/30/12. This unit is ideal for modern woodworking facilities where efficiency and process automation are crucial. Thanks to its two chambers, it ensures continuous operation and significantly improves material handling, minimizing downtime. The robust construction and the reliability of the BARGSTEDT brand guarantee long-lasting, trouble-free operation. Automatic loading from two chambers. Capacity: 8 cycles/minute. Ndsdpfx Abezgcd Ao Usb Loading with vacuum suction cups. Maximum panel size: 1300*2500. Option to purchase the entire line, including a roller conveyor equipped with a conical swivel and a double-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Nedpfx Ajy Sazfob Uodb Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 -Quantity: 2x amplifiers available Ndjdpfx Asn Hbcysb Ujb -Price per piece -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.

Year of construction: 2022, operating hours: 3 h, condition: used, functionality: fully functional, empty load weight: 5,011 kg, fuel type: diesel, lifting height: 4,710 mm, free lift: 890 mm, mast type: triplex, construction height: 2,225 mm, fork length: 1,200 mm, fork carriage width: 1,110 mm, drive type: Diesel, load capacity: 3,000 kg, construction width: 1,300 mm, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 28 x 9 - 15 Njdet Dd Iqjpfx Ab Uedb Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50 - 10 Rear tires Condition: 80 - 100% Description: Full cab with heating, working lights front + rear, 3rd + 4th valve to fork carriage, indicators, hand lever load protection grille, sideshift, 3rd valve, 4th valve, front working lights, heating, soot filter, full cab, interior mirror, windshield wiper, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 13,610 h, load capacity: 3,000 kg, lifting height: 4,950 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,214 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic/Dual pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection, including inspection certificate. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would also be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase equipment from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes and errors. Side shifter, fork positioner Kaup double pallet clamp Njdpfxjzllfye Ab Uodb 3rd valve, 4th valve, rear work light, front work light, half cabin, solenoid valve, dust filter, air conditioning, full free lift, safety light, seat heating, Comfort seat, fabric, seat heating

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm Ndjdpfx Asyb Sz Iob Usb 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 60600 € 1145.34 € 3100 mm 10 mm 10 mm 8 mm 8 mm 6 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1550 mm 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support Ndodpsynm D Rofx Ab Uob NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 111500 € 2107.35 € 3100 mm 20 mm 20 mm 16 mm 16 mm 12 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 6000 mm 2200 mm 1900 mm 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll Ndsdpfoynm Ebox Ab Ujb digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: excellent (used), Year of construction: 1997, I sell the throughfeed drilling machine with HOMAG BST440/30/D. Year 1997 Configuration: 4+4 motors from under 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 2+2 motors from top Ndodst Nddpspfx Ab Ujb 4 pcs. material pressure from top Very good condition. Available immediately.

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,100 mm, Diesel forklift Manitruck D 30 Drive Diesel Year built 2023 Ndjdpexluz Defx Ab Ueb Lifting height (mm) 4,760 Lifting weight (kg) 3,000

Condition: used, functionality: fully functional, machine/vehicle number: 2482558, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 37.4 kW (50.85 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 45 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6-50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,725 mm, color: red, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2021 Engine: Diesel, 37.4 kW Max. load capacity: 3,000 kg Load centre: 500 mm Lift height: 4.30 m Weight: 4,610 kg Njdpfx Aoyqznvjb Ujdb Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, with normal signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2482538, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 37.4 kW (50.85 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 45 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6-50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,725 mm, color: red, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2021 Engine: Diesel, 37.4 kW Max. load capacity: 3,000 kg Load centre: 500 mm Ndedsyxm Urepfx Ab Usb Lift height: 4.30 m Weight: 4,610 kg Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, with normal signs of use