Used Proton ⭐Wet Paint Booth & Drying System⭐ for sale (36,866)

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that impresses! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available upon request ⏰ 48H EXPRESS DELIVERY available after a deposit! Regular delivery time varies between 1 business day and approximately 15 weeks depending on stock. 🔧 Please note: Additional options may extend delivery time. 📩 Ask the seller in advance whether your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire Purchase ✔️ Leasing ✔️ Warranty Programs 📞 Contact us – we'll find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard booth sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard booths modularly to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-of-the-line wet paint booth & drying system 📐 Technical specifications (inside / outside): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air treatment box: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling supply air plenum – for even, dust-free painting 🚪 3-wing main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – rapid heating to 60–80°C 8–15 min 🔇 Low-noise, high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99% High-temperature heat exchanger made of special steel 🧼 Top-of-the-line filter technology: ✅ Pre-filter (tear-resistant, up to 100°C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control of ventilation, heating, lighting, and Safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Flexibly positioned air treatment units – can be mounted on the right, left, or rear of the cabin ➕ Optional equipment (for an additional charge): 🪟 Panoramic doors – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ Selecting optional equipment may extend delivery times. Please discuss your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we would be happy to provide you with a customized quote! Redpfsipvulox Akwsu ☀️ 2-YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Rsdpfx Aey T Nzdskwou Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet.

Condition: new, These units are manufactured from galvanized sheet and are designed to be fully screwed. This takes up very little space during shipment. Suction system is designed separately and specially for each booth so that the booth provides perfect suction. Thanks to the suction system, it is not possible for the personnel applying wet paint to be disturbed by the paint. In Elboy Wetline-KF Wet Paint Application Booths, environmental pollution is prevented by using accordion and cartridge or roll glass fiber filtration system. Wet paint particles vacuumed through suction fan in the air are caught by the accordion filter on the back of the booth. Wet paint particles in the trace amount which are not caught by the accordion filter are caught by the fiber filter on the back side. Rsdpfx Aksdy Dv Dewou The door system can be fitted to the front door entrance in various ways. UV lights can be placed in the cabinet to check the painting process.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Rodpey Tiaajfx Akweu Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters Rjdpfx Akjx Uz Rmowsu - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Rodpfxsp S Tlho Akwou Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters Rsdpfx Akew Rpxcowou “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits Rjdpfoc Uthxex Akwou ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Redpfx Akody Dw Ajweu Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: Rsdjun R Ufjpfx Akwou After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. Rjdpfsc Uthdjx Akweu ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System Rodpfxjya Hvqs Akwsu 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: MKR30029343, MACHINE DETAILS Redpfx Asy Tn Rkekwou Voltage: 400 V Frequency: 50 Hz Power: 6.2 kW FEATURES CE marking MAKOR unloader is not included in the scope of supply.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info. Redsq Nfuzspfx Akweu

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry Redpfsq Igyvox Akwsu - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, 450218 Pneumatic Piston Pump, Rsdpfx Akolf H S Uewou - No. 1: K. Schmidt Type DC 30.20/4, - No. 2: BEDE AIRLESS, max. approx. 36 l/min.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Redpfx Aev Ed Ukekweu Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for efficient air handling and ventilation applications. The offered machine is engineered for reliable operation and consistent performance in industrial environments. The cabin has overall dimensions of 2000 mm in length, 2050 mm in width, and 2850 mm in height. It is equipped with an electric motor rated at 3 kW, operating at a nominal speed of 2800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring smooth operation, low vibration, and high mechanical efficiency. The system is designed to deliver an airflow capacity of 4000 m³/h, providing effective air extraction and circulation for various industrial processes. The open-type cabin design allows unobstructed access, ease of maintenance, and optimized airflow distribution, making it suitable for ventilation, fume extraction, and general industrial air handling applications. All mechanical and structural components are manufactured in accordance with standard industrial engineering practices to ensure durability, operational reliability, and long service life. The unit is designed for continuous-duty operation and complies with typical industrial safety and performance requirements. This offer includes the complete machine as described above, fully assembled and ready for installation. Rsdpfoygh Alox Akwsu

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for high-efficiency air handling applications. The offered unit is engineered for continuous industrial operation and robust performance in demanding environments. The cabin has overall dimensions of 2,500 mm (length) x 2,250 mm (width) x 2,650 mm (height). It is equipped with a high-performance electric motor rated at 5.5 kW, running at a nominal speed of 2,800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring stable operation, minimal vibration, and high aerodynamic efficiency. The system is designed for a maximum airflow of 7,000 m³/h, providing efficient air extraction and circulation for industrial processes. The open-type cabin configuration allows for easy access, straightforward installation, and optimal airflow distribution, making it ideal for applications such as ventilation, fume extraction, and general industrial air handling. All mechanical components are manufactured in accordance with standard industrial practices, ensuring durability, reliability, and long service life. The unit is suitable for continuous duty and complies with typical industrial safety and performance requirements. This offer includes the complete, fully assembled machine as specified above, ready for installation. Rodpfx Akeyghwiswou

Condition: new, Year of construction: 2026, An open-type industrial booth engineered for efficient air extraction and ventilation in professional and industrial environments. The unit features overall dimensions of 1269 × 1367 × 2379 mm and is equipped with an electric motor rated at 1.1 kW operating at 2800 rpm. Air movement is provided by a Ø315 mm impeller, delivering an airflow capacity of 2600 m³/h. The booth is designed for reliable continuous operation, ensuring stable airflow performance and effective extraction, making it suitable for industrial applications that require controlled ventilation and air handling. Rodpfx Aksyghnnoweu

Condition: new, Year of construction: 2026, functionality: fully functional, This solution is an innovative development by 3K, designed as a compact yet highly efficient laboratory furnace system with dimensions of 1000 × 1000 × 1200 mm. The unit utilizes a 0.75 kW electric motor paired with a 200 mm diameter backward-curved impeller, ensuring optimized airflow within the chamber. This design delivers uniform air circulation, promoting consistent thermal distribution and reliable process outcomes throughout the usable volume. From an engineering perspective, the system achieves stable aerodynamic properties with reduced turbulence and energy loss, ultimately enhancing operational efficiency and reliability. In summary, this is a compact, durable, and thoughtfully engineered furnace solution that fuses precise airflow control with proven performance—an ideal choice for demanding laboratory as well as light industrial operations. Rodpfey A Eb Sjx Akwou

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m Redpfx Asyrr Rqjkwou 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Rsdpfx Aksia Taqswou Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Rodpfjia Tauox Akweu Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: used, Length 3.500 mm Depth 1.000 mm Height 2.000 mm ca. 700 kg Sturdy Lübbers paint drying trolley with adjustable center rake. Available: 15 units Price per unit: € 490.00 + VAT. Rsdpfew I Sykjx Akwsu