Used Rausch Raeummaschine Rs3, Rs4, Rs 6 for sale (52,985)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Hjdpsw Huh Nofx Alijnn Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Hjdow Ighispfx Alionn Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Year of construction: 1973, condition: refurbished (used), machine/vehicle number: 5116/447, machine type: vertical internal broaching machine manufacturer: Rausch (Haan/Rhld) type: RS 6/1000 built in: 1973 totally rebuild in: 3/2021 by WiemersAG weight: 800kg pulling force: 60kN (80kN) broaching speed: 3m/min & 5m/min return speed: 10m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 610mm x 470mm (520mm x 320mm) working stations: 1 pcs drive: mechanic drive system engine: 5,5kW / 8,2kW / 8,2kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Hodpfegw Hvcox Alionn Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench Hnedoza U Aljpfx Alisn -Setting plates -Crane -Platform -2x tool cabinets Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Hnjdov Rmvzopfx Alijn Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Hedow H Dgnepfx Alionn Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 1993, condition: refurbished (used), machine/vehicle number: 3694/895, machine type: vertical internal broaching machine manufacturer: Rausch type: RS 3/1000 built in: 1993 totally rebuild in: 5/2021 by WiemersAG weight: 400kg pulling force: 3.000kg (30kN) broaching speed: 3m/min & 6m/min return speed: 6m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 430mm x 320mm (340mm x 220mm) working stations: 1 pcs drive: mechanic drive system Hodpfx Alegw Hvnjisnn engine: 2,5kW/ 3kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Hnjdpfoytvyxex Alijn Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: ready for operation (used), Vertical - broaching machine Rausch Type RSIZ 6 / 1000 S Condition is used technical data: Working range : up to 1000 mm Cutting speed 3 to 5 m/min Return speed 10 m/min Interior: largest workpiece diameter 600 mm Outer chambers: area of the clamping plate 600 x 340 mm Coolant device Tensile force measuring device Automatic central lubrication Spindle protection by spring band spirals Chip conveyor shut-off counter Hededyp Rmopfx Alionn Dimensions: 1.05 m x 0.9 m x 4.3 m Weight 1200 kg Self-collection or forwarding. We will be happy to help you organize an inexpensive forwarding agent. You are welcome to visit us for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The machines and tools are sold as is. The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Hsdpfjiqkb Rex Alisnn Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Condition: used, Year of construction: 1972, pulling force - max. 6 t Hnodpfx Aeyif Nlslien max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), We are offering a temperature test chamber here. Water-cooled Hjdpfx Alsygunhsisnn Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, mileage: 83,853 km, power: 115 kW (156.36 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 2,180 kg, maximum load weight: 1,320 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 3,520 mm, fuel consumption (urban): 610 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,109 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2023, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S tires, Unladen weight: 2180 kg, Permissible total weight: 3500 kg, Cargo area (L W H): 3,540 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo area volume: 12 m³, 1st axle: , 2nd axle: , Seats: Fabric, Interior color: Gray, Leaf spring suspension, 1 x Airbag, Electronic Stability Program ESP, Anti-Slip Regulation ASR, Automatic climate control, Driver's seat height adjustable, Passenger bench seat for 2 people, Headlight range adjustment, Radio, Digital radio reception DAB, Multi-function display, Mobile phone preparation Bluetooth, Parking assist rear, Multifunction steering wheel, Power steering, Adjustable steering column, Electric windows 2-way, Outside temperature display, Exterior mirrors electric and heated, Wide-angle mirrors, Immobilizer, Central locking with remote control, Partition with window, Cargo area floor: wood, Cargo area wall paneling: high-grade plastic, Rear doors with 270° opening angle, Sliding door on the right, Hill start assist, Daytime running lights, Cup holders, Driving profile selection: ECO driving mode, Preparation for trailer socket 12V, Steering with City function, Start/Stop system, Fuel filter heated, 3rd brake light, Storage compartment under passenger bench seat, 2 rows of tie-down rails in the cargo area, Fuel tank 70 liters, AdBlue tank 20 liters, Rear step, Payload 1320 kg, Previously a rental vehicle, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, Your contact person: Mr. Bächer, Tel.: , Financing possible, Errors and changes excepted. Hnjdpfxozdvxne Alijn

Condition: used, mileage: 43,497 km, power: 115 kW (156.36 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,180 kg, maximum load weight: 1,320 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 3,520 mm, next inspection (TÜV): 07/2026, fuel consumption (urban): 610 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,109 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2024, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, color: white IC 194, current tires: M+S tires, unladen weight: 2180 kg, permissible total weight: 3500 kg, cargo space (L W H): 3,540 mm x 1,800 mm x 1,900 mm, tire size: 225/65 R16, cargo space volume: 12 m³, 1st axle: , 2nd axle: , seats: fabric, interior color: gray, leaf spring suspension, 1 x airbag, digital tachograph: version 4.1, trailer coupling ball: trailer load 3500 kg, electronic stability program ESP, anti-slip regulation ASR, automatic climate control, driver's seat adjustable in height, co-driver's bench seat for 2 people, headlight range adjustment, radio, digital radio reception DAB, multi-function display, AUX & USB connection, Bluetooth audio streaming, Bluetooth hands-free system, rear parking assistance, multi-function steering wheel, power steering, adjustable steering column, electric windows 2-way, outside temperature display, exterior mirrors electric and heated, wide-angle mirrors, immobilizer, central locking with remote control, partition with window, cargo area floor: wood, cargo area wall paneling: high-grade plastic, rear doors with 270° opening angle, sliding door on the right, hill start assist, daytime running lights, connection plug 1x13-pin, cup holder, trailer socket 12V 13-pin, steering with city mode, start/stop system, fuel filter heated, 3rd brake light, storage compartment under co-driver's bench seat, 2 rows of lashing rails in the cargo area, fuel tank 70 liters, AdBlue tank 20 liters, rear step, payload 1320 kg, formerly a rental vehicle, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, your contact person, Mr. Bächer, tel. , financing possible, subject to errors and changes. Hnodpfxszcz Sfe Alien

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33t variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, tow bar, gross combination weight 59 t, with ATS warranty, and much more. MAN ATS warranty valid until 25.09.2026 Commercial tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permitted total vertical load, Tech. Plus Medium-high design TN long cab with one sleeper berth and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang 800 mm Differential locks in rear axles Transmission: MAN TipMatic 12.28 OD PTO, gearbox-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable Transmission function MAN EfficientRoll Transmission function rocking mode Transmission for increased thrust share during driving Transmission functionality MAN Idle Speed Driving Drive programs: MAN TipMatic Performance and Efficiency, up to 70,000 kg Drive programs: MAN TipMatic Offroad, up to 70,000 kg Drive program: MAN TipMatic Manoeuvre, shunting mode Creeper function MAN EasyStart Full brake assistant ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar: ROCKINGER type 400 G 150A with pneumatic connections for trailer loads up to 40,000 kg Tech. Plus 59,000 kg permissible gross combination weight Tech. Plus Hnjdpsx Txwusfx Alisn Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED marker lights and turn signals on the sides Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel with 2 functions, operable from outside with door open Air-sprung and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation 7 inch New vehicle with MAN ATS warranty Net price plus 19% VAT. Attractive financing offers available on request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2509

Condition: new, mileage: 472 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck, first registration 05/2025, 33-ton variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with ATS warranty, and much more. MAN ATS warranty until 25/09/2026 Trade tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permissible total vertical load (Tech. Plus) Medium-high design TN long cab with 1 sleeper bunk and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD transmission Gearbox PTO, transmission-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function Rock-free function (transmission) Transmission suitable for increased traction proportion during driving MAN Idle Speed Driving gearbox functionality MAN TipMatic Performance and Efficiency drive programs up to 70,000 kg MAN TipMatic Offroad drive program up to 70,000 kg MAN TipMatic Manoeuvre (shunting mode) drive program MAN EasyStart hill-hold control Full brake assist ABS, EBS, ASR, ESP Leaf-sprung front and rear axles Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER coupling type 400 G 150A with air connections for trailer loads up to 40,000 kg (Tech. Plus) Hjdpsyn T Txsfx Alisnn 59,000 kg permissible gross train weight (Tech. Plus) Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED outline/side marker and turn signal lights Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl control panel, 2 functions, operable from outside with the door open Driver’s comfort seat, air-cushioned, heated, with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Advanced Media System Navigation 7-inch New vehicle with day registration on 13/05/2025 and MAN ATS warranty until 25/09/2026 Net price plus 19% VAT. Attractive financing options upon request. All information without guarantee. Subject to prior sale and errors excepted. Internal vehicle number: 2509

Condition: new, mileage: 472 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck, first registration 05/2025, 33-ton variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with ATS warranty, and much more. MAN ATS warranty until 25/09/2026 Trade tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permissible total vertical load (Tech. Plus) Medium-high design TN long cab with 1 sleeper bunk and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD transmission Gearbox PTO, transmission-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 Hedpfx Aljx Txwnoijnn High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function Rock-free function (transmission) Transmission suitable for increased traction proportion during driving MAN Idle Speed Driving gearbox functionality MAN TipMatic Performance and Efficiency drive programs up to 70,000 kg MAN TipMatic Offroad drive program up to 70,000 kg MAN TipMatic Manoeuvre (shunting mode) drive program MAN EasyStart hill-hold control Full brake assist ABS, EBS, ASR, ESP Leaf-sprung front and rear axles Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER coupling type 400 G 150A with air connections for trailer loads up to 40,000 kg (Tech. Plus) 59,000 kg permissible gross train weight (Tech. Plus) Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED outline/side marker and turn signal lights Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl control panel, 2 functions, operable from outside with the door open Driver’s comfort seat, air-cushioned, heated, with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Advanced Media System Navigation 7-inch New vehicle with day registration on 13/05/2025 and MAN ATS warranty until 25/09/2026 Net price plus 19% VAT. Attractive financing options upon request. All information without guarantee. Subject to prior sale and errors excepted. Internal vehicle number: 2509

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33t variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, tow bar, gross combination weight 59 t, with ATS warranty, and much more. MAN ATS warranty valid until 25.09.2026 Commercial tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permitted total vertical load, Tech. Plus Medium-high design TN long cab with one sleeper berth and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang 800 mm Differential locks in rear axles Transmission: MAN TipMatic 12.28 OD PTO, gearbox-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable Transmission function MAN EfficientRoll Transmission function rocking mode Transmission for increased thrust share during driving Transmission functionality MAN Idle Speed Driving Drive programs: MAN TipMatic Performance and Efficiency, up to 70,000 kg Drive programs: MAN TipMatic Offroad, up to 70,000 kg Drive program: MAN TipMatic Manoeuvre, shunting mode Creeper function MAN EasyStart Full brake assistant ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar: ROCKINGER type 400 G 150A with pneumatic connections for trailer loads up to 40,000 kg Tech. Plus 59,000 kg permissible gross combination weight Tech. Plus Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof Hjdpsx Txycofx Alisnn LED taillights and daytime running lights 2 LED marker lights and turn signals on the sides Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel with 2 functions, operable from outside with door open Air-sprung and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation 7 inch New vehicle with MAN ATS warranty Net price plus 19% VAT. Attractive financing offers available on request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2509

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33 ton variant, 6x4 drive, wheelbase 3.30 m, 510 hp, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with manufacturer’s warranty, and much more. MAN ATS warranty valid until 25.09.2026 Rated payload: 33 tons Hnedpfx Aljx I T Tysien Permissible gross vehicle weight: 26,000 kg Permissible total vertical load (technical, plus): 28,000 kg Medium-high design TN long cab with single sleeper bunk and rear window Diesel engine with 375 kW (510 hp) and 2,600 Nm torque 6 x 4 drive Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD gearbox Transmission PTO, gearbox-dependent, type NH/4c, without flange, ratio f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function MAN Rocking mode (creep mode) Transmission for increased thrust during driving operations MAN Idle Speed Driving transmission functionality MAN TipMatic Performance and Efficiency drive programs, up to 70,000 kg MAN TipMatic Offroad drive program, up to 70,000 kg MAN TipMatic Manoeuvre program for low-speed maneuvering MAN EasyStart hill start assist Full brake assist ABS, EBS, ASR, ESP Front and rear axles leaf sprung Front axle: 9,500 kg; rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER type 400 G 150A drawbar coupling with air connections for trailer load up to 40,000 kg (technical plus) 59,000 kg permissible gross train weight (technical plus) Automatic climate control (Climatronic) Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind driver's cab roof 2 LED roof beacons on driver's cab LED tail and daytime running lights 2 LED contour and side indicators Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel, 2 functions, operable from outside with door open Air-suspended and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation, 7-inch New vehicle with manufacturer’s warranty Price NET excluding 19% VAT. We are happy to offer you attractive financing options. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2509

Condition: used, mileage: 1,60,028 km, power: 184 kW (250.17 HP), first registration: 07/2018, fuel type: diesel, empty load weight: 5,300 kg, overall weight: 18,000 kg, tire size: 295/80/R22.5, axle configuration: 4x2, wheelbase: 3,875 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, trailer coupling, - A rarely available MAN TGM 18t with low mileage, immediately available in Bad Salzuflen, ideal for conversion into: tipper truck, roll-off tipper, beverage truck, short flatbed, etc. - Total weight 18000kg, unladen weight approx. 5300kg - Manual transmission Hnodjzc U Eljpfx Alion - Optional auxiliary drive/hydraulic system available - Trailer coupling with air connections - Leaf spring / leaf spring - Wheelbase 3875mm - Tires: 295/80R22.5 - Spare tire - Errors and prior sale excepted... Air conditioning, VAT can be shown, ABS, service booklet, cruise control, trailer coupling, cab: short, tipping hydraulics, from first owner, emission class: Euro 6, diesel, rear-wheel drive, MOT + emissions test will be renewed before sale, particulate matter sticker: 4 - Green.

Condition: used, mileage: 60,899 km, power: 115 kW (156.36 HP), first registration: 03/2022, fuel type: diesel, empty load weight: 2,180 kg, maximum load weight: 1,320 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 3,520 mm, fuel consumption (urban): 610 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,109 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2023, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S tires, Unladen weight: 2180 kg, Permissible total weight: 3500 kg, Cargo space (L W H): 3,540 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo space volume: 12 m³, 1st axle: , 2nd axle: , Seats: Fabric, Interior color: Gray, Leaf spring suspension, 1 x Airbag, Electronic Stability Program ESP, Anti-Slip Regulation ASR, Automatic climate control, Driver's seat adjustable in height, Co-driver's bench seat for 2 persons, Headlight range adjustment, Radio, Digital radio reception DAB, Multi-function display, AUX & USB connection, Bluetooth audio streaming, Hands-free system Bluetooth, Parking assistance system rear, Multifunction steering wheel, Power steering, Adjustable steering column, Electric windows 2-way, Outside temperature display, Exterior mirrors electric and heated, Wide-angle mirror, Immobilizer, Central locking with remote control, Partition with window, Cargo floor: Wood, Cargo space wall lining: High-grade plastic, Rear doors with 270° opening angle, Sliding door on the right, Hill-start assist, Daytime running lights, Cup holder, 8-speed automatic transmission (ZF), Preparation for trailer socket 12V, Steering with City mode, Start/Stop system, Fuel filter heated, 3rd brake light, Storage compartment under co-driver's bench seat, 2 rows of lashing rails in the cargo space, Fuel tank 70 liters, AdBlue tank 20 liters, Rear step, Payload 1320 kg, Former rental vehicle, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, Your contact person, Mr. Bächer, Tel., Financing possible, Errors and changes excepted. Hjdpfozcrzqjx Alienn

Condition: used, mileage: 291 km, power: 152 kW (206.66 HP), first registration: 12/2025, fuel type: diesel, empty load weight: 3,750 kg, maximum load weight: 4,250 kg, overall weight: 8,000 kg, axle configuration: 4x2, wheelbase: 3,690 mm, next inspection (TÜV): 12/2026, fuel consumption (urban): 700 l/100km, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, number of seats: 2, total length: 7,000 mm, lifting height: 2,600 mm, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, traction control, Color: white IC 194, unladen weight: 3,750 kg, permissible total weight: 8,000 kg, tire size: 235/75 R17.5, 1st axle: , 2nd axle: , fabric seats, interior color: gray, leaf/air suspension, digital tachograph, ASR traction control, ACC adaptive cruise control, air-suspended driver and passenger seat, height-adjustable driver/passenger seat, driver's armrest, driver/passenger seat heating, bi-xenon headlights, headlight cleaning system, radio, AUX & USB ports, Bluetooth phone preparation, lane keeping assistant, multifunction steering wheel, power steering, adjustable steering column, driver's lumbar support, electric windows (2x), outside temperature display, fog lights, electrically adjustable and heated exterior mirrors, curb mirror, wide-angle mirror, immobilizer, central locking with remote control, rear differential lock, twin rear tires, hill-start assist, LED daytime running lights, cup holder, driver’s seat ventilation, chassis, single passenger seat, rear axle air suspension, VEHICLE LOCATION: 90441 Nuremberg, Dieselstr. 65, Contact: Mr. Bächer, Tel., Errors and changes excepted. Hnodpfx Aley N Eghoien

Condition: used, mileage: 51,811 km, power: 175 kW (237.93 HP), first registration: 06/2022, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space length: 5,400 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 1524 L Chassis, Wheelbase 3,560 mm * Suitable for body lengths of up to approx. 5.40 m * Engine version EURO 6 E * Vehicle number for customer inquiries: 4655 * Engine version Euro VI, E * Active Brake Assist * Rear axle differential lock * Air conditioning * Lane Keeping Assist * High Performance Engine Brake * Light sensor * Rear axle air suspension * Cross member for G135 trailer coupling * Rain sensor * Stability control assist (ESP) * Electronic braking system with ABS and ASR * Driver’s comfort suspension seat * Electric window lifters, both sides * Transmission G 140-8/9.30-0.79 * Weight variant 15.0 t (5.1/10.5) * Central locking system * Mercedes PowerShift 3 * Reverse warning buzzer, combined with hazard warning lights * Exterior sun visor, transparent * Cruise control * Low storage tray on engine tunnel * AdBlue tank 35 l * Roof hatch/ventilation flap * Cab rear wall with window * Main mirror, electrically adjustable, driver’s side * Heating, electronic air supply unit * Plastic fuel tank 120 l, left side * Engine OM936, inline 6, 7.7 l, 175 kW (238 HP), 1000 Nm * Wheelbase 3560 mm * Tubeless tyres, 285/70 R 19.5 front axle * Inline 6-cylinder engine * S-cab ClassicSpace, 2.30 m, tunnel * Rear axle stabilizer under frame * Parabolic front spring, 5.1 t * Rear engine PTO, c, hydraulic pump ISO 7653D * Metal headlamp stone guard Hnsdpfx Aloy Dkk Isien * Tachograph digital, 2nd generation, ADR * Environmental sticker (green) * Two-seater * Full service history No liability for printing or typing errors. Sale to commercial customers only. Subject to prior sale and errors. Specification subject to change without notice. Description for vehicle identification only and does not constitute a legally binding warranty. The contract text is decisive. * TOP SERVICE + QUALITY * We can offer you a LEASING-FINANCING-RENTAL PURCHASE proposal * Extended warranty possible on request via insurer * Technical inspection (TÜV)/BGR LBW/tachograph test and OBU unit installation available locally via our partners * Temporary export license plates for 30 days * All export customs documents possible on request * Toll-Collect MAUT booking in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL BY TRAIN/STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Over 200 vehicles always in stock

Condition: used, mileage: 4,87,950 km, power: 175 kW (237.93 HP), first registration: 06/2016, fuel type: diesel, overall weight: 16,020 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 34 m³, loading space length: 6,350 mm, loading space width: 2,493 mm, loading space height: 2,150 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, ATEGO 1524 L Chassis, Wheelbase 4,760 mm * Permissible total weight: 16,000 kg * Very well-maintained condition! * Vehicle number for customer inquiries: 3670 * Engine version: Euro VI, version 2 * Rear axle air suspension * Air conditioning * Rear axle differential lock * Stability control assistant (ESP) * FleetBoard, German version * Auxiliary heater, 2,000 W * Tail lift * Weight variant 16.02 t (6.1/10.5) * Cruise control * Standard engine brake system * Digital tachograph, EC, RPM indication * Mercedes PowerShift 3 * Central locking system * Electric windows, both sides * Comfort air-suspended driver's seat * Electronic braking system with ABS and ASR * Particulate filter * Environmental badge (green) * Two-seater * Inline engine, 6 cylinders * Cross member for trailer coupling G145 * Front spring, 6.1 t, parabolic * Engine OM936, inline-6, 7.7 l, 175 kW (238 hp), 1000 Nm * AdBlue tank 25 l * Plastic tank 120 l, left side * Pre-equipped for toll recording * Transmission G 140-8/9.30-0.79 * Main mirror, power adjustable, driver’s side * S-Cab ClassicSpace, 2.30 m, tunnel * Trailer socket 24 V, 15-pin * Roof hatch/ventilation flap * Rear axle stabilizer under frame * Wheelbase 4,760 mm * Heating, electronic compressed air supply unit * Tubeless tires, 275/70 R 22.5 front/rear/extra load axle * Fully serviced with service book * 2/3 doors No liability for printing or typing errors Sale only to business customers Subject to error and prior sale. Changes, prior sale, and errors expressly reserved. This description serves to identify the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Warranty insurance available from the insurer on request * TÜV / UVV tail lift / tachograph inspection and installation of OBU device possible via local partners * Export license plates for 30 days available Hjdoruiqtspfx Alionn * All export customs documentation possible but must be requested individually * TOLL for Toll-Collect can be processed in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, mileage: 1,37,192 km, power: 103 kW (140.04 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,413 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fiat Ducato Panel Van 35 140 HP L2H2 * Euro 6 emission standard * Panel van L2 H2 (medium wheelbase, high roof) * 6-speed manual transmission * Wheelbase: 3,450 mm * Tow bar (trailer hitch) 2,500 kg * Air conditioning * Multifunction steering wheel * On-board computer * Sliding door on the right * Rear swing doors Special equipment: Passenger side airbag, Techno dashboard, electrically adjustable and heated exterior mirrors, electronic parking assist, rear wing doors (opening angle 260/270 degrees), infotainment system: UConnect with CD and MP3 player, partition wall in load compartment, full wheel covers, mud flaps rear, mud flaps front Other equipment: Driver's airbag, brake assist, driver assistance system: Adaptive load control (LAC), rear wing doors without glazing, body type: high-roof panel van, variant: high-roof, fuel tank: 75 liters, heated crankcase ventilation, engine: 2.3-liter - 103 kW Turbo Diesel Multijet, low emissions according to Euro 6d-TEMP, cab seating: double passenger seat, Start/Stop engine system, lightly tinted windows Subject to prior sale and errors! Sale exclusively under our terms and conditions (AGB) Hodpfxjwqy R Do Alionn Important notice: Despite carefully checking all details in our offer, errors may occur. Some may be due to data transmission errors between various platform providers. Therefore, all information is provided without obligation and does not constitute a legal claim. Legal notice: This sales listing does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it contains information about possible contract initiation. All details are provided without guarantee and do not constitute warranted characteristics.