Broaching machine / RAUSCH RS 6-1300

RAUSCH RS6/1300

Year of construction: 1992, condition: good (used), machine/vehicle number: 662681751, Broaching Machine - Vertical Manufacturer: Rausch Type: RS6 / 1300 Machine number: 662681751 Year of manufacturing: 1992 Type of current: 3N ~ 380 Volt/50 Hz Bsdpfofc T Edsx Apvjlk Connected value: 7,1 KW Ampacity: 17 Ampere Weight: 810 kg Circuit diagram number: RS6 – 39 With aggregate Size table: 520mm x 320mm

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Bljdsup Uzfepfx Apvok Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: like new (used), Tool and cutter grinder NESI model C350 Bledpjinbigjfx Apvjk

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm Bledeyif Nlspfx Apvjk table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels Blodpfxsw Ighis Apvjk - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: used, groove width 3-28 mm tool length - max. 1200 mm working speed 3m/min+6m/min m/min pulling capacity 60 kN bei 3m/min kN Bsdpfx Apoyz Dgdsvolk pulling capacity 40 kN bei 6 m/min kN stroke 1050 mm weight of the machine ca. 600 kg

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,270 mm, total width: 1,100 mm, total height: 1,700 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. Bledpsyuc D Tjfx Apvok For over 12 years we have focused on quality, precision and reliability. METAL SLOTTING MACHINE B5016C – STROKE 160 mm METAL SLOTTING MACHINE B5016C A machine designed for machining various internal and external surfaces, especially keyways. It is widely used in maintenance workshops and tool rooms. Technical Specifications Parameter Specification Maximum ram stroke 160 mm Number of strokes per minute 23 / 32 / 44 / 48 / 67 / 92 Worktable diameter 350 mm Vertical ram adjustment 160 mm Distance from tool holder to column 485 mm Distance from table surface to ram body 320 mm Maximum longitudinal table travel 360 mm Maximum cross table travel 320 mm Maximum table rotation angle 360° Maximum tool size 25 × 40 mm Maximum table load 300 kg Maximum slotting force 4.5 kN T-slot width in worktable 14 mm Main motor power 1.5 kW Overall dimensions (L × W × H) 1270 × 1100 × 1700 mm Weight 1400 kg Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) Bljdpfxeytvyxs Apvjk - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Dimensions/Weight Bledpfx Apozmqcyovjk approx. 900 x 650 x 1300 mm (L x W x H) / 550 kg Type: Hydraulic vertical keyway milling machine HKZ 25/325 Manufacturer: FRÖMAG Machine No.: 49063 ASK4550-10 Year of manufacture: 1991 - workshop-inspected Technical data: Keyway width 3-25 mm Keyway length 325 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Bledpfxsv Rmvze Apvok Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.