Used Rounding for sale (3,889)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! Laodpfx Aszcqy Eolyjh The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Ledpfozcgtbjx Alyoah 10 m.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge Lodpfx Alszyuckeysah 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm Lasdszrui Iepfx Alyjh - Max. allowance for machining per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame Lajdozw N Eujpfx Alyeh - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0111, The Bacciottini ROL 110 is a high-speed rotary creasing, perforating, and cutting machine designed for paper and cardboard materials. The manufacturer is Bacciottini Group Srl. Lodo Adrlzepfx Alyoah Key Features: • Maximum working width / paper size: 110 cm (1100 mm) • Functions: Automatic and high-speed creasing, perforating, punching, and cutting of paper and heavy-duty cardboard. • Production years: These machines were manufactured between 1994 and 2000. Please note that more information can be found in the attached video of a similar machine.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Ljdpfx Aszwlnrelyeah Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Laedpfjzr D Rbox Alyjh

Condition: used, 2 clamping plates for KK 8 Cast plate, ribbed Laedps Abbfrefx Alyeh Diameter 800 mm and 780 mm, price each 375 net.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Laodpfxjzlhams Alyjh

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Lodpjzxc Aiofx Alyjah

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, Stellmacher, type RST310/3-3 SE, for the production of cylindrical milled wood with a diameter of 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. There are two roller conveyors on wheels for feeding and removing the wood. Lasdpfsy Ta Ibox Alyoh

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch Ledpsxa Ettjfx Alyeah 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 2018, Dough dividing and forming machine Lippelt SVI-4DA Year of manufacture: 2018 Dough hopper with pre-portioner, approx. 130 kg dough capacity Head divider, 4-row Weighing piston for small and large weights Weight range, small: 50-80 g Weight range, large: 70-115 g Touchscreen control, Siemens PLC With program memory Laedpfxsz A Srxs Alyjh Spreading belts with adjustable spreading width Flour dusting for spreading belts With oiling system for rose buns

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. Ljdpfxozxn Aus Alyoah This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, Working length: 1270 mm Roller diameter: 120 mm Maximum sheet thickness: 4.5 mm Sheet thickness for bending: 4 mm Electrical connection: 400 V, 2.2 kW Lasdpfx Aloz Erabeysh Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm with hardened rollers

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - Maximum diameter of workpieces: 130 mm - Fitted sleeve: 110 mm - Maximum diameter of input material: 160 mm - Minimum length of input material: 800 mm - Maximum allowance for machining per side: 15 mm - Cutter head drive motor: 15 kW - 3 feed speeds + forward/reverse - Feed motor: 1.1 kW In sequence: - 3 geared pull rollers - 3-knife cutter head - 3 smooth pull rollers - Dimensions (length/width/height): 3100x1400x1500 mm - Weight: 2100 kg ADVANTAGES – Polish production – 3-knife cutter head – Used lathe, very good condition Net price: 32,900 PLN Net price: 7,651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations) Ljdpozulqnefx Alysah

Year of construction: 2017, condition: good (used), Conical rounding machine - used - year of manufacture 2017 - rounding length 3.6 m - lubrication option - air blow option - machine from production Ljdpfxezm Rfuo Alysah - technically sound - collection from warehouse / shipping option available - price on request

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted -Total volume: 600 liters -Outer diameter: 1360 mm -Work basin width: 430 mm Laodszhxduepfx Alyoh -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg

Condition: excellent (used), CATALOGUE NUMBER 8015 Lajdeztafkopfx Alysh TECHNICAL DATA - Range of diameters of workpieces 40-140mm - Max. diameter of input material 210mm - Min. length of input material 600mm - Max. allowance per side for machining 30mm - Fitted sleeve with a diameter of 100mm - Motor for driving the cutter head 18.5kW - Feed + forward/backward - Feed motor 3.73kW In sequence: - Infeed trough - Toothed draw rollers, 6 pcs - 4-cutter head - Smooth draw rollers, 6 pcs - Dimensions (L/W/H) 2600x1200x1390mm - Weight 1700kg ADVANTAGES - Made in Poland - DTR documentation available - Used chamfering machine, very good condition Net price: 49,900 PLN Net price: 11,605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools Lajdpfx Asuy T Exslyeh 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm 4. round arc milling device with radius ruler For radii from 300 - 5500 mm For the production of round, stitch and basket arches Machine and device fully functional and cleaned

Condition: used, Year of construction: 2010, Dough Divider and Molder Fortuna Primus K6 Lasdpjz A Srlofx Alysh Year of manufacture: 2010 Condition: cleaned & inspected Operating hours: approx. 24,500 Output per row: max. 1,200 pieces Maximum total output: 7,200 pieces/hour Weight range: 35-80g Piece weight, molding speed, and molding chamber height can be adjusted manually Pressure roller on spreader belts Flour dispenser at the dough discharge Includes piston set for 4 and 6-row production The Fortuna Primus is a proven dough divider and molder for the best artisanal quality. It is the dough expert for difficult and long-proofed doughs – from soft Berliner dough to firm pretzel dough. Even cool or doughs that tend to stick are processed gently and precisely by the Fortuna Primus. Convenient dough input via a hopper with a capacity of 20-25 kg Small amounts of dough are automatically fed to the dividing system via star wheels Thanks to the dough-friendly dividing system, the fermentation cells remain optimally preserved Best conditions for artisanal baked goods of top quality Dough pieces detach easily from the drum, even with extremely soft doughs, without prior addition of flour Easy access to all machine parts for simple cleaning and maintenance

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : Lodpfezuikxex Alysah :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Lsdexa Excspfx Alysah

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Lajdszmt U Eopfx Alysh