Used Safop Ht 1250 Ws Cnc for sale (12,259)

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm turning length 2200 mm Iodpsyhrb Usfx Ac Uoti control Siemens 840 D

Condition: used, Year of construction: 2001, punching force: 2,800 t, total length: 2,500 mm, sheet thickness (max.): 8 mm, overall weight: 11,500 kg, table length: 1,250 mm, Offered for sale. Nice Boschert punching nibbling machine. Comes with a large selection of tools. Ijdoyiz I Tepfx Ac Usti

Condition: used, Year of construction: 1995, Technical details: Itedpfx Aex Uzvpsc Uji grinding length: 1250 mm grinding width: 600 mm workpiece height: 730 mm table surface area: 1720 x 500 mm headstock: dist. table - spindle center: 900 mm max. longitudinal movement: X-1450 feed range: 10 - 20.000 mm/min vertical movement: Y-730 mm feed range: 0,2 - 3.000 mm/min cross travel: Z-550 mm feed range: 5 - 5.000 mm/min power capacity: 1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds: 50-6.000 U/min cutting speed: max. 80 m/sec. weight of the machine ca.: 11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect. *

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts. Ijdjyw Hxnjpfx Ac Usti

Condition: ready for operation (used), A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible. Ijdpfx Acex Uq Twe Usti

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. 📌 Key features: ✔ Precise cutting of laminated beams Isdpfx Acovu Um Ns Uoti ✔ Automatic control for increased efficiency ✔ Robust and reliable construction

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfoi D Upcox Ac Ueti

Condition: ready for operation (used), Bosch CNC control board, used, shows normal signs of wear, 100% functional. Isdpfx Acoi D T Sve Ujti

Condition: ready for operation (used), Bosch CNC control card, used, with normal signs of wear, 100% functional. Iodpfx Acji D T Srs Ujti

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Itodpfx Acjyz Sw Ro Uji Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Iodpfx Aowqplkoc Ueti for sale as spare part dispenser! *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 42,200 h, pressing force: 130 t, table length: 3,230 mm, clearance between the columns: 2,650 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 2,840 mm, overall weight: 10,200 kg, control type: CNC control, Hello, We are selling Trumpf TruBend 5130 CNC press brake, tooling included.. 130t/3meter CNC bending machine, Ijdpfx Ajy Nd I Rsc Ueti 4-axis back gauge, CNC crowning, TASC 6000, Willa hydraulic clamping, Tooling included, priced aprox. 10000€ Lower die 16mm - 3m - sectionized for 30° 50mm - 3m - sectionized 80mm - 515mm Upper Tool finer height 200mm, radius of 1mm, for 30° - 3m - sectionized, for thicker plates height 20mm, radius 3mm - 600mm - sectionized Feel free to contact.

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Model WS1100 x 7000 18 ton capacity Iedpfxoy U Hc Ij Ac Uoti 1100mm swing 7000mm between centres Single saddle 700mm chuck Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Safety fence

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses Itsdpexdxccefx Ac Uei * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: good (used), * Machine length: ~ 19600 mm * Machine width: ~ 6200 mm * Machine height: ~ 2500 mm * Max weight of roll: 50 T * Roll length: max 13000 mm * Roll diameter: max 2000 mm * Grinding spindle speed: 450 – 1800 rpm * Cutting speed: 10 – 45 m/s * Adjustment distance: ~ 13900 mm Machine delivered new in 1986, upgraded in 2014 including new Siemens controls. Itsdpfxeud R Sze Ac Usi

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Laser Power 3000W Wavelength 1080nm (±10nm) Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel Itsdpfxsza Rm Ho Ac Usi

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KLC301520260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Corporation Limited, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-1500、3000、6000、12000, laser hours: 80,000 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, table length: 5,100 mm, table width: 2,400 mm, table height: 2,300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 25 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 95 mm, cutting speed: 110 mm/min, positioning speed: 140 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,000 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, overall weight: 4,500 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, 1.This is a fully enclosed single-platform fiber laser cutting machine equipped with 6000W MAXPHOTONICS original fiber laser source and BOCHU control system. 2.Adopting integral welded bed with aging stress relief treatment, the machine features high rigidity and long-term stability. 3.The full-enclosed protective structure realizes smoke removal, noise reduction and laser radiation protection, meeting environmental protection and safety standards. 4.With high-precision servo drive system and intelligent height tracking cutting head, the machine ensures accurate positioning and smooth cutting section. 5. It is widely used for cutting carbon steel, stainless steel, aluminum alloy, brass and copper plates, featuring low failure rate, easy maintenance, high efficiency and stable mass production performance. It is an ideal equipment for sheet metal precision processing. 6.Laser Source Brand: MAXPHOTONICS 7.Laser Source Model: MFSC-6000 8.Laser Power: 6000W 9.Wavelength: 1080nm (±10nm) 10.Control System: BOCHU CypCut/HypCut 11.Structure: Fully Enclosed Single Platform Iedpfx Ajza Rmyjc Ujti 12Positioning Accuracy: ±0.03mm/m 13.Repeat Positioning Accuracy: ±0.02mm/m 14.Max Idle Speed: 120m/min 15.Cooling Mode: Water Cooling 16.Processing Materials: Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm Itedpsza Rm Tefx Ac Usi 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible Iedpswfwkwefx Ac Uoti - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure Itjdexu Uhvjpfx Ac Uei - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit metal roller, slip unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Iedpjzkfybsfx Ac Uoti Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: new, Year of construction: 2026, NEXT 3121 VECTOR 7 AI – CNC machining center for nesting with integrated artificial intelligence (NEXT.AI). Designed and manufactured in Poland. Robust, welded steel construction, heat-treated at 600°C, provides high vibration resistance and minimal deformation, ensuring exceptional cutting accuracy. WORKING AREA AND DRIVE - Working area: 2130 x 3130 mm (sheet format up to 2100 x 3100 mm) - Z-axis stroke: 250 mm - Max. X/Y travel: 80 m/min; working X/Y travel: 25 m/min; working Z travel: 12 m/min - NEXT ST 1 kW servo drives with absolute encoders and battery backup – no need for reference jogging - SHIMPO planetary gearboxes, precision rack and pinion, and linear guides SPINDLE AND TOOLS - NEXT 9 kW spindle, 24,000 rpm, HSK63 - HEMPOINT frequency inverter, NextS controller - Hybrid tool magazine: 12-position rotary + 12-position linear - Automatic tool length sensor with air blow - EA-32 tool holders, HSK63 collets TABLE AND VACUUM - 2-chamber, 9-section vacuum table with intelligent zone control - NEXT_V450 vacuum system with a capacity of 450 m3/h (7.5 kW), automatic vacuum regulation via frequency inverter - Material positioning using pins and alignment strips - Automatic central lubrication system for linear motion AUTOMATION AND AI - NEXT.AI assistant integrated with the operator panel – process optimization and G-code generation - CleanFlow – automatic cleaning of moving parts - AirJet Sync system – 4 nozzles to assist chip removal - NEXT LED LIGHT – status and machining progress indicator - VisionEdge 3.0 – 24-inch screen, 3 cameras, voice prompts - LIDAR safety sensors in the basic version CONTROL AND CONNECTIVITY - Touchscreen control panel, ABB electrical components - Built-in 5G modem – remote diagnostics and service - Wireless QUICK START remote and NEXT WATCH remote (smartwatch) - Handwheel with project simulation function - NextMonitor app (iOS) – remote monitoring 24/7, lifetime access SOFTWARE - CUT2DPRO nesting software (straight-line and curved optimization) INSTALLATION DATA - Power supply: 3x400 V + N + PE - Compressed air: 6-8 bar, 300 l/min - Dust extraction: 3000-8000 m3/h - Machine weight: approx. 4800 kg - Industrial cabling WARRANTY AND DELIVERY Itsdpfozlz Rljx Ac Uji - Warranty: 36 months - Lead time: 8-12 weeks - Training at the customer's site, CE declaration of conformity - Fully modular machine – upgrade options available (infeed/outfeed table, drilling unit, labeling machine, unloading robot) even up to 4 years after installation ADDITIONAL OPTIONS (surcharge) - 5+4W 1.5 kW drilling unit and Hiteco TF.C.12V (12+4+2) drilling unit - Infeed/outfeed table, label printer/labeling machine - NEXT ROBO XT (Yaskawa GP180) robotic manipulator for automated unloading Manufacturer: NEXTCNC Sp. z o.o., Poznań, Poland.

Condition: used, Year of construction: 2011, functionality: limited functionality, VAT invoice. Used isel flatcom l CNC milling machine for precise material processing. The machine enables the execution of complex projects and components. Itodpozcdaxofx Ac Usi Machine number 442776/1 X-axis: LES5 – 16×10 L=2190, Travel: 1900 (1600) mm Y-axis: 2x LES6 bevel gear – 16×10 L=1590 Travel: 1300 mm Z-axis: LES5 – 16x5 L=590, Travel: 300 mm A1: 2x RDH-M – 1:101, continuous rotation A2: 2x RDH-M – 1:101, continuous rotation HF ES 325 milling spindle The FlatCom L is equipped with a dual-axis rotary drive, enabling milling of parts from all sides. This allows for processing four parts in a single pass. An automatic, 16-position rotary tool changer ensures efficient tool change times. I have a video from 2012 showing the machine in operation when it was new. THE MACHINE IS NOT CONNECTED, AND THE BUYER DOES NOT HAVE THE POSSIBILITY TO START IT UP. Machine dimensions: Length 3250 mm Width 2300 mm Height 2600 mm Weight 1500 kg Automatic gate dimensions: Length 2400 mm Width 2000 mm Height 500 mm Weight 400 kg

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Iedpew R St Nefx Ac Ueti

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Ijdpfsw R Syiex Ac Ujti