Used Sany Stt4501E2-D for sale (46,309)

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 125 h, load capacity: 75,000 kg, fuel type: electric, construction height: 3,200 mm, empty load weight: 10,000 kg, total length: 5,800 mm, drive type: Elektro, tractive force with load: 75,000 N, construction width: 2,550 mm, Terminal tractor Cjdpfezh Rtzsx Ahkogw Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 280/75 Front tire condition: New Rear tire type: Pneumatic Rear tire size: 280/75 Rear tire condition: New

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Codpjzaqp Uefx Ahkegw Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Year of construction: 2023, condition: new, Field of application: Construction 1. Trapeze Bucket (or Trenching Bucket): Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines. Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth. Advantages: Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench. Efficient: Enables faster excavation, especially for straight-lined trenches. Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions. 2. Ditch Cleaning Bucket (or Grading Bucket): Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches. Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish. Cedpfx Ahen Tm Ngjkjgw Advantages: Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker. Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving. Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site. Conclusion: The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.

Condition: as good as new (ex-display), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 45,000 kg, Year of construction: 2018, 45 T spreader for Reachstacker, built in 2018. Spreader has been stored outside but is unused and recently completely checked Ceder Hmr Uepfx Ahkogw

Condition: used, SANYO SANMOTION Servodrive for Y-axis- with firmware for the Y-axis Cgodpfst Sbfisx Ahkow - removed from Wittmann W721 - refurbished3 months warranty: This is provided exclusively by a manufacturer's inspection. The process is carried out by Complast ufacturer: SANYO type: QS1A03AA Dition: überholt

Condition: new, Sanyo Denki 68ZBM330RXSD4 servo motor, serial number as shown in the photo, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Codei D Nufjpfx Ahkjgw

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Cgodpfxed Tw T Nj Ahkew Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface • Easy servicing of the drain pan We have 6 pc on Stock!

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Codpfszhkhxox Ahkogw Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Cgjdpfozh H Twsx Ahksw Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Csdpfxszgdbvo Ahkjgw Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: Csdpfx Ahoyc H R Tekjgw • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: used, functionality: fully functional, On offer: SCM Sanyda UNO 900 R+RT wide belt sanding machine. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Specifications: • Manufacturer: SCM • Model: Sanyda UNO 900 R+RT • Working width: 900 mm • Maximum working height: 150 mm • Number of sanding units: 2 • First unit: steel roller with a diameter of 140 mm • Second unit, combined type: soft rubber roller with a diameter of 140 mm and a sanding pad • Main motor power: 7.5 kW • Motor start in star-delta configuration • 2 conveyor belt feed speeds • Analog indicator for set sanding thickness • Thickness gauge for the workpiece with automatic adjustment of the worktable height • Pneumatic oscillation of the abrasive belt • Option to convert the oscillation system to optical control for an additional fee • Abrasive belt dimensions: 1525 × 930 mm • Number of dust extraction ports: 2 x 160 mm • Overall dimensions: 167 × 145 × 170 cm (L × W × H) Additional information: • Good technical condition • Machine preserved in its original condition • Photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers Csdpfxszhppnj Ahkegw • We assist in obtaining leasing or loan financing • Transport costs are determined individually

Condition: good (used), Tranklein EK-D 100 Double Corner Trimmer Made in Germany by Karl Tranklein. Very good condition. This is a professional, production-grade corner rounding tool. Sturdy cast iron construction ensures precise operation. Two trimming heads. Interchangeable knives. Adjustable margins. Includes one set of knives with an 8mm radius. Stack height: 100mm Weight: 140kg Cycles per minute: 50 cycles Cgsdpfx Ahozdaxtjkjw Power supply: 400V

Condition: like new (used), Year of construction: 1997, functionality: fully functional, GRAULE ZS 200N miter and cutoff circular saw in very good condition, like new, the machine has only a few signs of wear Cgsdpfxjzivwhe Ahksw Cutting height: 200mm at 90° Cutting length: 420mm at 90° Year of manufacture: 1997 can be swiveled on both sides, to the left up to 70° and to the right up to 45° with detents at 90° and 45° and with a very precise scale can also be tilted on both sides with a worm gear, to the left up to 60° and to the right up to 45° the saw comes from a small advertising company and was almost never used there, it was only used occasionally to cut aluminum profiles to length for light boxes all angle and miter settings are very precise the fixed stops can all be very precisely adjusted with hydraulic feed brake, which is adjustable the ideal saw for precise and fast cutting of profiles, cant boards, timbers, planks, boards and similar materials, very precise and clean miter and bevel cuts are possible, this saw should not be missing in any carpentry or joinery workshop for aluminum, wood and plastic with under-table the workpieces can be clamped pneumatically with 2 clamps very stable and torsion-resistant construction made of cast iron with very precise ball bushing guide of the tool slide on hardened and ground steel shafts we will deliver and demonstrate the machine throughout Germany for 220.00 euros, so you have no risk when purchasing, delivery to Europe is also possible upon request all functions work perfectly the machine can be used immediately the saw blade has a diameter of 520mm, it is in good condition and can be used immediately with manual there is also a roller conveyor, 3000mm long, for the machine the machine table is approx. 900mm wide and 700mm deep the saw has a large saw blade height adjustment, so smaller saw blades can also be used and it is also possible to perform scoring operations 380V, 5000W Saw blade speed: 2850 rpm the machine has the CE mark with soft start, motor brake and motor overload protection the saw unit has an automatic return professional equipment, not some cheap hardware store product very powerful motor with 5000 watts, hardly any signs of fatigue very robust and durable drive and guidance technology with dust extraction port 100mm weight approx. 300kg

Condition: excellent (used), Multi purpose oven with gas and steam heating. 2m wide belt. Superb condition, the best one we have seen of this model. Direct from closed meat free factory. The Revoband oven features precisely controlled vertical hot air directed at the product from above and below the belt. We designed the oven with adjustable fan speed control for each zone to provide unlimited flexibility. Perfectly suitable for chicken fillets, wings & drumsticks, burgers, nuggets, fish sticks, back bacon, sausages, lasagna and other special applications FEATURES & BENEFITS High Velocity air provides consistent color development and uniform cooking results Precise control of temperature and production time for repeatable results Cook with steam and elevated temperature or steam only for process flexibility Indirect heat eliminates by-products of combustion for product zone. Cgsdpfx Ahjrd Rqkskow

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Cjdpfshyuchex Ahkogw

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Codpfx Ahot R Skmsksgw

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Cedpfx Ahovuvbhekogw

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Cedpfxsmrqqdo Ahkogw

Condition: like new (used), Rotary 2 rack (racks for 18" x 30" trays) multi purpose oven / protein cooker. Previously used for cooking duck meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Codpomrqqtefx Ahkogw

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2014, total width: 2,470 mm, suspension: air, tire size: 385/55-R22.5, color: black, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension Cedszinmzopfx Ahkegw - Drum brakes = Notes = Nice 2014 D-TEC FLEXITRAILER 45FT HC chassis, BPW axles with drum brakes, ABS/EBS, 1st axle = lift axle, 3x extendable (front, middle and rear), 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC, unladen weight: 4,962 kg, permissible total weight: 43,000 kg, 385/55-R22.5 tires (R: 6/6/5mm; L: 5/6/5mm)), Dutch registration with valid technical inspection until 25-09-2026 = Further Information = Axle configuration Tire size: 385/55-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 35% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 35%; Tire tread right: 35% Weights Unladen weight: 4,962 kg Payload: 38,038 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 09.2026 Technical condition: very good Optical condition: very good Identification License plate: ON-18-JZ Further Information Please contact Arne Honingh for further information.

Condition: good (used), Year of construction: 2003, color: other, first registration: 05/2003, total height: 3,500 mm, total length: 9,000 mm, total width: 2,500 mm, Tyre profile: 50% Cgodpfxozic T Ao Ahkow Brakes: drum brakes Suspension: leaf suspension Technical condition: good Visual appearance: good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2014, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: black, Year of construction: 2014, Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.962 kg Carrying capacity: 38.038 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 10/2026 Condition Technical condition: good Visual appearance: good Damages: none Identification Registration number: ON-83-LL Additional information Please contact Arie or Pedro for more information Cgjdszhwcijpfx Ahkjw = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2014 3x uitschuifbaar: voor, midden en achter

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2015, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/65R22.5 Csdpfxezhuxbe Ahksgw Make axles: SAF Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.765 kg Carrying capacity: 38.235 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2015 3x extendable: front, middle and back

Condition: used, axle configuration: 2 axles, first registration: 02/2010, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 11,200 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,760 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Further Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 2, Payload: 23,200 kg, Own weight: 9,800 kg, Gross weight: 33,000 kg, Type of chassis: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Body year: 2010, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector 1850, Refrigeration unit: Diesel/Electric, Unit operating hours / electric: 137, Unit operating hours / diesel: 7979, Wall thickness: 45 mm, Type of refrigeration: Cooling, Axle type: MERCEDES-BENZ, Tail lift, Tail lift type: rear flap, Tail lift capacity: 3000 kg, Tail lift manufacturer: Ama, Tail lift material: Steel, Tail lift dimensions: 210x255 = Further Information = General information Cab: Day cab Registration number: OK-55-YX Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 6 mm Weights Unladen weight: 9,800 kg Load capacity: 23,200 kg Gross vehicle weight: 33,000 kg Functional Tail lift: Ama, rear flap, 3,000 kg Refrigeration unit: Diesel and electric (7,979 operating hours diesel; 137 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price ranges. Csdpfx Ahjyvffcjkegw Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration handled quickly • Expert technical services • The assurance of “recognizable quality” • And more… Please visit our website for special offers and complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask us directly about our European warranty package.