Used Schenck Balancer for sale (848)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Dodpoq I Rz Rsfx Ai Secn

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Dodeq Nin Ujpfx Ai Secn

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm Dedpox Ein Sefx Ai Secn - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. We use the system as follows: up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm Dedpfezu Rgusx Ai Sjcn up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation Dcedpeyxwmlefx Ai Son - Automatic drilling unit - Weight approx: 2200 kg - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Dcjdpewgnu Njfx Ai Sjn Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle Dodpfx Aijq Umcre Socn 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Dodpfx Aisylin Hj Sjcn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Dcjdpfeu Nmppjx Ai Sjn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Dcsdpfx Aijuh Svpo Sjn

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Dcjdpfx Aozxzrpsi Son Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Year of construction: 2004, condition: ready for operation (used), overall weight: 16,000 kg, Horizontal universal balancing machine manufactured in 2004. This SCHENCK HM 70U BU features a maximum workpiece weight of 50,000 kg and a maximum workpiece length of 15,000 mm. It includes a control unit with CAB 920 software and a total power requirement of 75 kW. If you are looking to get high-quality balancing capabilities, consider the SCHENCK HM 70U BU machine we have for sale. Contact us for further details. - machine type: Horizontal universal balancing machine- Control/Measuring Unit: CAB 920 (Software Version: V 5.3.1504)- Max. Workpiece Weight: 50,000 kg- Max. Workpiece Length: 15,000 mm- Max. Workpiece Diameter: 2,800 mm- Optional Balancing Capacity: Parts with Ø 4,090 mm and max. length of 1,200 mm- Bearing Center Distance: 5,050 mm- Drive Types: Cardan shaft drive + Belt drive- Safety Category: Class B protective shielding/guards- Transmission power (propeller shaft drive) 160 kW- Belt drive power 22 kW- Last Technical Inspection: September 2022- Space Requirements: Approx. 17 x 5 m- Control Panel Integration: Houses CAB 920 display, analog gauges (ampere meters), emergency stop button, key switch selectors, and a pull-out tray- Electrical Cabinet Hardware: Equipped with industrial frequency converters (ABB brand) and power distribution switchgear Dsdpfx Aezl D U Hoi Sscn

Condition: used, Technical details: Dcodpfjzuyd Nsx Ai Son balancing body max.: 7000 kg balancing body diameter w/o machining unit: 1870 mm balancing body diameter with machining unit: 1870 mnm distance between bearing centers: min. 200 mm rotation weight: 7000 kg Rotor-Ø: 1870 mm Bearing journal Ø: 40 - 180mm mm control: CAB 690 voltage: 380 V /50Hz V/Hz Rotor weight: 40–7,000 kg Machine overload capacity with symmetrical loading: up to 9,000 kg, i.e. max. 4,500 kg per bearing pedestal 1 × machine bed, divisible: 3.85 m + 2.0 m *

Condition: ready for operation (used), Year of construction: 2007, Available immediately from our location: Dedsz Ixi Iepfx Ai Secn CNC vertical balancing machine, TIRA Type KV 10 Year of manufacture 2007 Rotor mass 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Drive power 2.2 kW Weight 1500 kg Price: EUR 2,000.00 (plus VAT, ex works)

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm Dcjdpfxezi R R Ao Ai Ssn piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control *

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Dsdpfez Eay Nsx Ai Socn Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, USED ELECTRONIC WHEEL BALANCER, CEMB ZE 100/TC. Dsdpfszh Ehysx Ai Socn

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg balancing body diameter with machining unit 2100 distance of bearings kleinster 240 mm Dcodpfxozkbqpe Ai Son dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Djdpsz Hmhijfx Ai Sscn Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) Dcedpfx Aioz Iybfo Son - Grinding wheel: 500x63 mm, 50 m/s - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 - Tailstock quill travel: 63 mm - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: used, Year of construction: 1961, workpiece weight 300 kg workpiece length 1200 mm diameter 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Dodpey Swhvefx Ai Secn possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, This listing is for a Sartorius Cubis MCE10202S-2S00-0 Balance with unit is in full working condition and is ready for immediate release. Experience unparalleled precision and versatility in laboratory measurements with the Sartorius Cubis MCE10202S-2S00-0 Balance, a standout model in the innovative Cubis II series. Key Features: High Capacity and Readability: With a capacity of 10,200 g and a readability of 0.01 g, this balance is ideal for weighing larger samples with utmost accuracy. Exceptional Reproducibility: Achieve consistent results with a reproducibility of ±0.007 g, ensuring reliable data across multiple measurements. Impressive Linearity: Maintains accuracy with a linearity specification of ±0.02 g, making it suitable for critical weighing tasks in demanding environments. Dcedpfx Aisxxzaaj Sjn Spacious Pan Dimension: The balance features a spacious weighing pan measuring 8.1 in x 8.1 in (206 mm x 206 mm), accommodating a variety of sample sizes comfortably. User-Friendly Display: Equipped with an MCE Touch Screen Back lit display, it offers intuitive navigation with manual level control and a motorized internal calibration feature for convenience. Additional Information: Modular Weighing System: The Cubis II series allows for individual configuration from various components, enabling users to adapt the balance to specific weighing tasks seamlessly. Versatile Applications: This balance is suitable for a broad range of laboratory applications, including research, quality control, and educational settings, making it a versatile tool for scientists and educators alike. Range of Options: The Cubis II series boasts a selection of premium laboratory balances with maximum loads ranging from 2.1 g to 70 kg and readability options between 0.1 μg to 1 g, providing tailored solutions for different measurement needs.

Condition: used, This listing is for a Vibra HTR-220E Balance Dcedpexzg Tksfx Ai Ssn

Condition: used, Year of construction: 2018, functionality: unexamined, input current: 10 A, input frequency: 50 Hz, overall weight: 1,200 kg, CNC Shaft Inspection and Balancing Machine Maximum shaft length: 800 mm 230V 50 Hz L = 1300 mm; W = 1000 mm; H = 1300 mm Dcsdpfxsyhq Nqs Ai Sen

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Dcedpfexhfgvsx Ai Sen Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification