Used Sigma Sigma Pick & Place Feeder And for sale (11,970)

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders. Bjdpfxsd Nkp Ao Ak Tswr

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Bsdpfod Nkpysx Ak Tewr This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram Bjdpfxsznd Skj Ak Tjwr - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Year of construction: 1998, condition: used, Built in 1998 Size max 205 x 130 x 30 mm Bsdediqhvopfx Ak Towr min 35 x 50 mm Product weight max 1-300 g/qm Speed max up to 200 c/min

Condition: new, Year: 2023 • Type: Robotic pick and place cell • Robots: 2 x Stäubli TS2-80 SCARA robots • Robot reach: 800 mm • Robot payload: 8.4 kg each • Guarding: Full enclosed safety cell • Controls: Integrated control cabinet with HMI • Teach pendants: 2 fitted • End of arm tooling: Vacuum gripper heads fitted Bjdpfsy An Egsx Ak Towr • Conveyor system: Infeed/outfeed conveyors included • Application: High-speed food/product pick and place

Condition: excellent (used), Year of construction: 2009, DENSO robot, model KLS VS-6556E/E (serial number: 02F133) Year of manufacture: 2009 Number of axes: 6 Controller: RC5-VSE6BA-BP Pick-and-place robot with KRUPS conveyor belts. Reading system, automatic conveying. Bsdpfxoizw Hgs Ak Tjwr

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), serial number B 348 = €13,000 + VAT Bwjdjyrm E Aopfx Ak Tor 1 unit X 2 (year of manufacture 2006), serial number B 251 = €13,000 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and welcome. Please refer to the photos for the technical data and configuration of each machine. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without placement tables or MTC (material transfer cabinet). Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Year of construction: 2026, operating hours: 1 h, condition: new, We are offering this new Wenzhou Yingxing technology SMT220 pick and place machine, manufactured in 2026. It comes complete with 10 x 8mm feeders, 3 x 12mm feeders, 2 x 16mm feeders, and a YX3040 stencil printer. Includes monitor, keyboard, mouse, and all software. Everything is brand new. Machine type: Pick-and-place machine Model: SMT220 Bwodozq Sk Hepfx Ak Tsr Power: 400 W Input voltage: AC220 V - 110 V Frequency: 50 Hz Weight: 76 kg Date of manufacture: 26.1 If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2011, condition: excellent (used), Essemtec Pantera XV Pick-and-Place Machine Year of manufacture: 2011 Bodpfx Ajyxc I Uek Tewr Excellent condition From small-batch production 0201 components Top-down image processing Intelligent tape feeder (8 to 56 mm) Placement speed: 4,500 cph Easy-to-use graphical software Optical alignment “on the fly” Upward-vision system for component inspection Feeder package: 9 – 740i paper 8 mm 1 – 740i blister 8 mm 5 – 741i 12 mm 7 – 742i 16 mm 1 – Vibration feeder 1 – Strip tape feeder

Year of construction: 2006, condition: good (used), functionality: fully functional, Machine width: approx. 1.90 m with track/transport path approx. 1.25 m without track/transport path Bsdpfx Akjzl R R Ie Tjwr Machine depth: approx. 1.35 m incl. main switch approx. 1.20 m without main switch Machine height: approx. 2.00 m with superstructures/signal light approx. 1.50 m without superstructures Note: The dimensions are measured manually and may differ from official manufacturer specifications. 2. Work area / component placement area Work area in the component placement area: approx. 600 × 600 mm Note: This is the measured mechanical area in the machine room or in the component placement area. The maximum processable printed circuit board size may differ from this and must be confirmed separately via machine data and software settings.

Condition: ready for operation (used), Suitable for twist-off caps Bodpfx Akoy A Tk Io Tewr Suitable for screw caps Capacity: up to 30,000 caps per hour Magnetic elevator belt

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder 1x 8/12mm 8-lane feeder Bodpfsw U Dpqox Ak Tjwr

Condition: used, Year of construction: 2006, Available in Q3 2026 NXT base 1: independent, control for second modul Head1: H12S Head2: H12S NXT base 2: dependent, works under modul 1 Head1: H12S Head2: H04 NXT base 3: independent Bedpezf H N Tefx Ak Tswr Head1: H04 Head2: H01 Feeder slots on each NXT modul 45 pcs. Total slots 270pcs for 8mm - Feeders included: o 156 pcs 8mm tape feeders o 29 pcs 12mm tape feeders o 16 pcs 16mm tape feeders

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Bwsdpfxoy Hlw Ij Ak Tor Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: good (used), Year of construction: 2007, Pick & Place machine including HHS hot melt application system with 4-channel control unit and tank on a mobile cart Bsdpfjyuixksx Ak Tjwr

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control Bedpeu H R Iwefx Ak Tjwr - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Bodpjv H R Dhjfx Ak Tewr Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Year of construction: 2008, condition: repair required (used), We offer this Ishida Robot Pick and Place machine, year of manufacture 2008. Model: (5102 -1023) Serial number: 74355-003 Identification number: Date of manufacture: 08.04.2008 Mainboard: IP-4G1v3 Processor: Celeron 2.0 GHz RAM: 256 MB DDR Hard disk: CD-ROM drive: Floppy drive: Graphics card: Intel 845G onboard Power supply: 100-240 V AC, 50-60 Hz, 2.2 A Bjdpoytb E Hofx Ak Towr If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale Bodpfx Akowy U Nme Tjwr PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Bjdpfx Akjw Rm Hwe Tjwr Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Bwjdpfexf Ur Ajx Ak Tjr Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: used, Year of construction: 2020, Used. Ask for details! Bsdpfsyzcpwsx Ak Tewr

Condition: ready for operation (used), Year of construction: 2015, Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible. Bwedpfsvmgt Esx Ak Tsr

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Bwedpfx Akou Af Abs Ter

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). Bwsdouc Tzvopfx Ak Ter - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.