Used Single Easitemp 95/6/45 (Easi95.A) for sale (96,532)

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel Dedjfnvvijpfx Aptocl *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve Dcedpsfnvwqofx Aptel - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Heating capacity: 9 kW per unit Dedpfx Aozbx Rpjptscl Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 39,150 m³/h, overall weight: 2,720 kg, nominal flow rate: 39,150 m³/h, negative pressure: 6,250 Pa, nominal power: 90 kW (122.37 HP), rotational speed (max.): 1,325 rpm, Various fans from Polytechnik are for sale: 1. A450-45.0-G5 20kW 2. A450-45.0-T1 20kW 3. A450-45.0-T2 20kW 4. A450-45.0-G7 22kW 5. A500-45.0-G3 24kW 6. A560-45.0-G2 30kW 7. A710-45.0-G4 60kW Dcedpfxju Udibe Aptjl 8. A800-45.0-G6 80kW

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X Dcodpfxezxbkfs Aptel DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Dcsdpfx Apowk Nldjtel

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature Dcsdsftm Hrspfx Aptsl - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame Dcjdpfx Aoy Rulijptsl for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Dcodpfoyvqdfox Aptel Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm, Rotor length: approx. 600 mm, Rotor diameter: approx. 450 mm, Heavy-duty design, Closed solid rotor, 3 rows of rotor blades (9 pieces), new Dedpfx Ajh Igygeptecl 2 rows of stator blades (4 pieces), new with wear protection (Hardox), new, Screen basket + 1 screen, new, with control cabinet, approx. 6 m cable, newly wired, Housing temperature monitoring Hydraulic unit, Shredder, ideal for shredding solid parts, Testing / demonstration possible by appointment.

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Djdpfx Aew Rktzoptscl Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Year of construction: 2022, condition: ready for operation (used), overall weight: 4,500 kg, This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this tube bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D tube bending machine. Contact us for more information about this machine. • Max diameter (steel 450 n/mm²): ∅ 45x4 mm // max diameter (stainless steel 700 n/mm²): ∅ 40x3 mm // max diameter (steel 450 n/mm²): 40x35x2 mm • Tube passage in the collet: ∅ 45 mm • Useful working length with tube passage in the collet: 5100 mm • Bending angle max: 180+10° • Speed y axis: 150 °/sec. // speed x axis: 450 mm/sec. // speed z axis: 360 °/sec. • Precision y axis: +/-0. 1° // precision x axis: +/-0. 1 mm // precision z axis: +/-0. 1° Dcodpfx Apoyzg A Uetsl • Bending: clockwise • Total installed power: 15 kw • Voltage and frequency: 400 volt / 50 hzMachine still under powerSquare tube sizes: 12x12, 20x20 • Round tube diameters: 12, 16, 20, 22, 27, 33.7 • Notes: • Square 12x12 can also be used for round diameter 12 • Square 20x20 can also be used for round diameter 20

Condition: good (used), functionality: fully functional, Power: 6370 watts Maximum operating temperature: 95°C Dcodpfov R Edwjx Aptjl Medium: water Two units available! Price per piece! Price for two temperature control units: 900 EUR!!!

Year of construction: 2015, condition: excellent (used), The device is for sale: They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device Dcjdpfoncdwyex Aptjl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Dcodpfx Aex Tq S Doptel

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Trimming saws, each 2.2 kW Dcjdoy Am Elopfx Aptjl Cutting depth: 125 mm Saw blade diameter: 350 mm Tiltable up to 45 degrees

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Dedpfx Asvdu N Ajptecl

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm Dcjdpfx Aexw Tqzjptol # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, power: 11 kW (14.96 HP), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max Pump Speed: 2600 rpm Pressure Regulator: with hydraulic flow control X-T open Direction of rotation: right (viewed from drive shaft) Flow Rate: 2 x 68 liters/min at 1450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 32 liters The unit is equipped with the following components: Dsdpfxjx Szxle Aptecl • 32-liter accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump for hydrostatic drives in open circuit. The flow rate is proportional to the drive speed and the displacement volume is adjustable. The swash plate allows infinitely variable adjustment of flow rate. 2 leakage oil connections Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Comprehensive regulator options Short response time The through-drive is designed for mounting gear pumps or axial piston pumps of the same nominal size, i.e. 100% through-drive capability.

Condition: used, Year of construction: 2009, functionality: limited functionality, machine/vehicle number: B-8023, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th Axis # Rapid traverse speed: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock features: # Spindle distance: 200 mm # Maximum distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal cooling), Tool Holder (Size 40) Djdpfx Apsxxi Skstocl # Speed range (standard): 100/8,000 rpm, Max torque: 85 Nm at 330 rpm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: Sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. Tool change time (fastest): 3 s. Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # 4th axis: Nikken CNC180 FA (2012) # Broken tool detection system: Blum Novotechnik # Chip extractor # Lubrication system # Electrical panel cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine condition: OPERATIONAL — with 1 spindle / 2nd spindle defective — can be repaired.

Condition: used, Single Head Cutting Saw – FOM Spring 45 A - Available with loading and unloading roller conveyors. Professional single head up-cut saw designed for high-precision cutting of aluminium profiles and light alloys. The FOM Industrie SPRING 45 A is equipped with pneumatic head tilting and hydro-pneumatic blade feed. Main features - Ø 450 mm tungsten carbide blade - Pneumatic head tilting around the horizontal axis - Cutting positions: 20° right 45° right 90° 45° left 20° left - Mechanical stops for intermediate positions with cushioned support, manually adjustable on a wide graduated scale - Hydro-pneumatic blade feed - Direct motor/blade transmission - Full cutting area guarding with automatic closing system Equipment Horizontal clamps Vertical clamps 2.2 kW blade motor Integrated safety system Robust structure for continuous professional use Dcjdpfx Apoy Ukr Tstsl Applications Ideal for: window and door manufacturers aluminium processing industrial profile cutting light metal fabrication production of frames and curtain walls

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Dedpszab A Eefx Aptocl

Condition: used, Year of construction: 2018, SAROPACKER T450 + WS560A The SAROPACKER T450 and WS560A are semi-automatic shrink wrapping machines designed to combine the sealing and shrinking processes into a single, efficient operation. These machines are designed to increase packaging productivity by incorporating an automatic closing function and enabling efficient product removal, which can significantly boost output compared to manual wrapping methods. Both machines feature robust main bodies with ventilation slots to ensure adequate cooling during operation. They are mounted on sturdy legs with casters, allowing for easy mobility and repositioning within the workspace. The SAROPACKER T450 features a control panel with a digital display and an emergency stop switch, providing straightforward operation and safety controls. Similarly, the WS560A model is equipped with a control panel featuring emergency stop and start buttons for user convenience and safety. Dedpfxoycfx Ae Aptecl The WS560A model also features a conveyor belt with a blue surface to facilitate smooth product handling during the packaging process. Additionally, there is a roll holder for shrink film located beneath the machine, which supports continuous film feeding. These machines are displayed in an industrial warehouse setting and appear clean and well-maintained. They are suitable for companies looking to improve packaging efficiency with reliable semi-automatic shrink-wrapping equipment. Please note that the machines are offered “as is” at the location.

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Dsdpfx Apoxzynuetocl

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well. Djdpjwf Anhofx Aptscl