Tenoning machine

Krüsi ZA66 / 95

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Podpfjrubg Hsx Adkjgp

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Podoh Nvyzepfx Adkegp -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Pedpfx Adswvq E Aokjgp Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, Pedjx Hp Iwjpfx Adksgp 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Working width 610 mm Working height 200 mm Motor output 4,4 kW Feed speed 7-14 m/min. weight of the machine ca. ca. 1.150 kg Pgodswy Itlspfx Adkep

Condition: used, Surface planer available in 2-sided or 4-sided configuration REX HOMS Working width max. 2050 mm Working height max. 310 mm Podpfjyid Uyox Adksgp including swivel ring The 8 images show a REX HOMS 2050 in water blue color which was refurbished and delivered by jöma some years ago and serves as an example.

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left Pgedpfx Aexran Nsdkop With tools as shown in the picture

Condition: excellent (used), mileage: 4,95,000 km, power: 537 kW (730.12 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: blue, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2017, Equipment: AdBlue, air conditioning, cruise control, retarder, second fuel tank, spoiler, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Remarks = Colour: Blue Details Manufacturer: Scania Model: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Mileage: approx. 495,000 km Engine: 730 HP / EURO 6 / 16 liters diesel / V8 Transmission: Scania Retarder R4100 Pgodpfx Adjuu Ha Dskjp First axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction Gross vehicle weight (GVW): 26,000 kg Gross combination weight (GCW): 160,000 kg Equipment 500L + 500L fuel tanks AdBlue NATO / 24-volt electrical system Warning beacons on roof Alcoa rims Toolbox PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto Cabin Multifunction steering wheel Cruise control Sun visor 2 x Bed Fridge Comfort seats Storage compartments Radio CD player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Gross permissible weight: 42,000 kg Transmission Gearbox: Scania Retarder R4100 Axle Configuration Front axle: Tire size: 385/65 R 22.5; Aluminum rims; Max. axle load: 8,000 kg; Steered; Suspension: leaf suspension Mid axle: Tire size: 385/65 R 22.5; Aluminum rims; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Functional Body brand: Scania Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request

Condition: refurbished (used), 6-spindle moulder, with 22 cm workbench and grooved workbench for short pieces. Automatic left shaft: automatically adjusts according to the width of the wood being processed. Engine composition and power: Lower 5.5 kW Right 4 kw Podpfx Aevhbf Sjdkogp Automatic left 5.5 kw Right 5.5 kw Superior 5.5 kw Less than 4 kW 4kW towing motor automatic left shaft hydraulic power unit 0.55 kw

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Podpfoxz Hh Uex Adkegp Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...