Used Sipa Lux for sale (322)

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Codpfx Apjvvku Estjrg

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Csdpfxeztwmfe Aptjrg

Condition: ready for operation (used), working length: 3000 mm working height: 1600 mm Cedpfx Apozww Epstsrg 3 vertical actuators 2 horizontal actuators manual operation mode pump motor power: 2.2 kW 1000 kg

Condition: used, SIPA horizontal drilling machine Crsdpfozvm Iqox Aptjg

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data Cedpfszb Adtex Apterg - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Condition: used, Year of construction: 2009, Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SIPA (Italy) - Model: SFR 8 - Year of manufacture: 2009 - Machine type: rotary stretch-blow moulder for PET bottles Crsdjzu Icyopfx Aptjg - Number of cavities: 8 - Output: up to 12,400 bottles/hour - Bottle formats: 0.5 l, 0.75 l and 1.5 l - Neck finish: 28 mm / 1881 (short neck) - Electrical connection: 400 V, three-phase - Total connected load: 147 kW - Location: Germany Included in the sale - Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l - Preform feeding system - Chiller - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Not included - Preform hopper (can be custom-made) - High-pressure compressor Condition The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 2017, machine/vehicle number: SO133, Used SIPA blow molding machine 2017 - 18.000 bphTechnical Specifications & Performance DataThis SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications.Manufacturer: SIPAModel: SFR EVO3Year of manufacture: 2017Production speed: up to 18,000 bottles per hourNo. of cavities: 8Neck finish: PCO 28-1810Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsContainer type: Designed for PET bottle handlingBottle diameter (min–max, diagonal): 50–125 mmBottle height (min–max, without neck): 80–349 mmAdvanced Automation & Control SystemsEngineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing sequences. Operator-friendly HMI and PLC-based control help streamline recipe management, process monitoring, and format changes. The machine architecture prioritizes repeatability of pre-blow and blow phases, promoting stable bottle quality across high-speed runs.Automated process control with user-oriented HMIEfficient preform heating for uniform material distributionQuick-change features to support format adjustmentsSafety-interlocked guards and emergency stop circuitry for operator protectionProduction Line Integration CapabilitiesThis blow molder integrates seamlessly into used bottling line configurations for PET, whether operated as a standalone unit upstream of a filler or synchronized within a complete beverage production line. The included preform feeding and preform cooling systems facilitate smooth infeed and stable production conditions, enhancing overall line efficiency.Inline or standalone operation with standard conveyor interfacesCompatible with downstream filling, capping, and labeling equipmentFlexible handling across 0.5L, 1.0L, and 1.5L bottle formatsSuitable for modernization or capacity upgrades in second hand packaging machinery setupsMachine Condition & Maintenance HistoryThe machine is currently working, indicating operational readiness within an active environment. Built in 2017, it offers a modern platform for operators seeking dependable performance and repeatable quality in PET bottle production. Its status as a functional, second hand unit makes it a strong candidate for rapid deployment in industrial packaging lines.Operational Performance & VersatilityWith 8 cavities and up to 18,000 bph output, the SFR EVO3 balances speed and quality for high-demand beverage production. The PCO 28-1810 neck standard supports widespread closure compatibility, simplifying cap sourcing and ... Credpfx Ajyhbihjptog

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Csdpfx Aoxyktlsptsrg Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen

Condition: used, functionality: fully functional, SIPA shelving press for veneering, 2500 × 1280 Shelf length: 2500 mm Shelf width: 1280 mm Loading height: 440 mm Operating pressure: 120 bar Press with 4 cylinders Shelves heated with water from the boiler. Csdjzmglqopfx Aptjrg

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Crodpfjvgufijx Apteg Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Credpfx Aoxqmp Rjptog Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Crodpsyw H H Sjfx Aptog Water heating

Condition: used, Year of construction: 2007, Used Blow Molding Machine Sipa SFR 16 Assessment of Heating System and Preform Feeding Firstly, a comprehensive evaluation of the entire oven system is imperative, encompassing turning-over ramps and tension wheel guides, to ensure an efficient and seamless bottle forming process. Evaluation of Transfer Arms and Cams of the Sipa blower An indispensable aspect pertains to the scrutiny of transfer arms and cams. These components play a pivotal role in maintaining a continuous and uninterrupted production flow. Furthermore, meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process. Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism. The accuracy and integrity of the molds are pivotal in producing flawless, high-quality bottles. Consequently, conducting a thorough assessment of these components is essential to ensure optimal machinery operation. Examination of Water and Air Circuits in the Sipa blower Codovgvtuepfx Aptorg Subsequently, the integrity of water and air circuits, integral components for preform cooling and pressure control during the blow molding process, is scrutinized. Ensuring proper circulation of water and air is crucial for maintaining stable working conditions and guaranteeing the quality of the final product. Technical Specifications and Additional Details In terms of technical specifications, pertinent details are provided regarding available SKUs and the weight of PET preforms per SKU. Specifically, for 0.5 L, the weight is 14 g, for 1.0 L, it is 26 g, for 1.5 L, it remains at 26 g, and for 2.0 L, it ranges from 29-31 g. It is important to note that the existing molds of the Sipa blower will not be supplied with the machine; replacement is at the discretion of the buyer. Additionally, the preform neck is specified as Corvaglia 28. Further technical details include the identification of the electrical cabinet and Command panel PLC of the Sipa blower as Siemens S7, along with the total number of cavities, which amounts to 16. Main observations on blowing machine Oven and the Preform in-feed Condition of the Following:  Oven, Turning-over ramps _ guiding and tension wheel  Heating modules, Oven ventilation and Cooling shields  Transfer arms and Cams  Moulds and Stretching mechanism  Water and Air Circuits All these are in great conditions  Number of SKUs and PET preform weight per SKU 0,5 L: 14 g 1,0 L: 26 g 1,5 L: 26 g 2,0 L: 29-31 g The existing molds will be supplied along with the machine. Current bottle drawings can be supplied as well. You will replace them if you want something different. Preform Neck Alaska 3-start Electrical cabinet and Command panel PLC: Siemens S7, great overall condition

Condition: used, Year of construction: 1983, machine/vehicle number: HL 2100 5083044, Working area: 3000 x 2250 mm (length x height) 3 vertical pressure bars 2 horizontal pressure bars Electric height and width adjustment Crodpfx Aozl Rugopteg with automatic sensing Machine in good condition.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, immediately available with automatic transmission, double glazing, and auxiliary heater! Special price – last vehicle before the introduction of the more powerful 190 hp version and Telma, which will be standard in the future. The ideal school bus or small coach for groups with limited budgets. Built for Germany with double glazing, auxiliary heater, and a 24-month warranty, optionally extendable. 29 reclining seats with folding tables. ----General vehicle data: * Length 7,168 mm * Width 2,262 mm * Height 3,352 mm * Wheelbase 3,350 mm * Front/rear overhang 1,613 mm / 2,205 mm * Turning circle diameter 12,200 mm * Passenger capacity 29 + 1 * Permissible total weight 8,160 kg * Diesel tank volume 160 l * AdBlue tank 12 l Drive: Cjdpszyzt Njfx Aptjrg * Type E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Type Automatic transmission * Emission standard Euro 6e * Displacement 2,998 cm³ * Power 110 kW / 150 hp at 3,500 rpm * Max. torque 370 Nm at 1320 rpm * Fire extinguishing system in the engine compartment Braking system and safety systems: * Disc brakes * EBS (electronic braking system) * ESP (electronic stability program) * ABS (anti-lock braking system) * ASR (traction control system) * AEBS (autonomous emergency braking system) * LDWS (lane departure warning system) Climate / Heating / Ventilation: * Roof-mounted air conditioning system Safkar * Convector heating on the side walls * 1 roof hatch, manual operation * Auxiliary heater Eberspächer Doors: * Door 1, single-leaf, front * Door 2, single-leaf, rear * Control, electric Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer

Condition: used, Zalkin type CA4 I 300 - serial no. 24361 Stelvin Lux cap 30 x 60 mm with cap feed 4 pcs. cap heads type VS 150, 250 litres cap feed with bars. Cjdpfx Apezx Ayhsterg

Year of construction: 2019, operating hours: 5,000 h, condition: used, functionality: fully functional, machine/vehicle number: F55 SV 078M, Oven - Manufacturer: Themor Flux - Model: F 55 - Hot air wood-burning stove - Year of manufacture/purchase: 2019 - Used sparingly - Well-maintained condition - Ideal for heating larger rooms, workshops, halls or similar buildings Crsdpfx Apszxw Dbjtsg Döring stainless steel chimney - Manufacturer: Döring - Double-walled stainless steel system - Diameter: approx. 160 mm - Total installed height to date: approx. 10.60 m - Several 1-meter pipe extensions available - Including inspection/cleaning element - Including connection/T-piece - Numerous matching wall brackets and connecting clamps - Additional available mounting material will be included - The chimney was mounted on a building and can be reused accordingly

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, H-frame Features: - 6 tie-down points - H-frame at the front - Folding sideboards Net price: €3,571.43 / Gross price: €4,250.00 Article number: PW1L20301510.01 Technical data: • Brand: Debon • Model: PW1.2 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Not initially registered • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 306 x 155 x 30 cm • External dimensions (L x W x H): 436 x 167 x 102 cm • Loading height of the floor: 72 cm • Permissible total weight: 2,000 kg • Unladen weight: 660 kg • Payload: 1,340 kg • Chassis: High-loader (wheels under the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum sideboards, anodized, double-walled • Sideboards foldable on the side and at the rear • Sideboards removable • Steel plate on wooden floor in Finnish quality • Removable H-frame at the front • Electric hydraulics with battery • Stable steel frame welded • Frame completely hot-dip galvanized • Numerous stable cross members, resulting in high point load capacity • Maintenance-free rubber spring axles • Reverse drive automatic • Overrun device and parking brake • 6 tie-down eyelets inside on the side edge • Eccentric locks • Stable V-drawbar • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame Cjdpfx Apozy A Dvjtsrg • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, H-frame, grating extension Equipment: -6 lashing eyes -Folding side walls -H-frame at the front Net: €4,352.94 / Gross: €5,180.00 Article number: PW1L20301510.61 Technical data: • Brand: Debon • Model: PW1.2 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 306 x 155 x 90 cm • External dimensions (LxWxH): 436 x 167 x 162 cm • Loading height of the floor: 72 cm • Permissible total weight: 2,000 kg • Tare weight: 660 kg • Payload: 1,340 kg • Chassis: High-loader (wheels under the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted Codpozy Ducefx Aptjrg DESCRIPTION • Aluminum side walls, anodized, double-walled • Side walls can be folded down on the sides and at the rear • Side walls removable • Steel plate on wooden floor, Finnish quality • Removable H-frame at the front • Electric hydraulics with battery • Sturdy steel frame, welded • Frame completely hot-dip galvanized • Hot-dip galvanized leaf grating, 60cm, 3-sided pivoting, unassembled • Many stable cross members, resulting in high point load capacity • Maintenance-free rubber spring axles • Reversing automatic • Overrun device and parking brake • 6 lashing brackets inside on the side edge • Eccentric locking • Sturdy V-drawbar • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, H-frame, aluminum side extension 30cm Equipment: - 6 lashing points - H-frame at the front - Folding side panels Net: €4,235.29 / Gross: €5,040.00 Article number: PW1L20301510.21 Technical data: • Brand: Debon • Model: PW1.2 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 306 x 155 x 60 cm • External dimensions (LxWxH): 436 x 167 x 132 cm • Loading height of the floor: 72 cm • Permissible total weight: 2,000 kg • Unladen weight: 660 kg • Payload: 1,340 kg • Chassis: High loader (wheels under the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Side panels fold down on the side and rear • Side panels removable • Steel plate on wooden floor in Finnish quality • H-frame at the front, removable • Electric hydraulics with battery • Sturdy steel frame, welded • Frame completely hot-dip galvanized • Aluminum side extension, 30cm, 3-sided pivoting • Many stable cross members, allowing for high point loads • Maintenance-free rubber spring axles • Reversing automatic • Overrun device and parking brake • 6 lashing eyes inside on the side edge • Eccentric locks • Sturdy V-drawbar • 13-pole connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle Cedpfx Apjzy Awistjrg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, H-frame Equipment: - 6 lashing eyes - H-frame at the front - Sideboards 35cm Net price: €4,697.48 / Gross price: €5,590.00 Article number: PW2L24301810.01 Technical data: • Brand: Debon • Model: PW2.4 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 180 x 35 cm • External dimensions (L x W x H): 437 x 192 x 166 cm • Loading height of the floor: 72 cm • Permissible total weight: 2,600 kg • Unladen weight: 745 kg • Payload: 1,855 kg • Chassis: High loader (wheels under the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum sideboards, anodized, double-walled • Sideboards foldable on the side and at the rear • Sideboards removable • Steel plate on wooden floor in Finnish quality • Electric hydraulics with battery • Removable H-frame at the front • Ramp shaft pre-equipped • Stable steel frame welded • Frame completely hot-dip galvanized • Maintenance-free rubber spring axles • Reverse gear automatic • Overrun device and parking brake • 6 lashing eyes inside on the side edge • Eccentric locking mechanisms • Stable V-drawbar • 13-pole plug • Reversing light • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Codpfezy Dk Dex Aptsrg We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Credpfxjw I Ui Uj Aptsg Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW Crsdpfx Ajzubtljpteg • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection power: 6 kW Credpjyvfkrjfx Aptjg Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 7500 TO 6750 EUR!!!

Condition: used, This listing is for a Leica HM-LUX Microscope Objectives Cedpjxzhh Njfx Aptsrg 10/0.25 40/0.65