Used Spirax Sarco Phs Easiheat for sale (453)

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system Guodpoz I Dv Hjfx Ag Ssh 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Gusdpswgkyhsfx Ag Ssh Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: ready for operation (used), Year of construction: 2003, A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible. Gujdpfxjzbl I Uo Ag Ssh

Condition: like new (used), The cylinder head has a crack, but this should not affect its function. Gjdpfxozb Axwo Ag Sjuh

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Gusdpezb Rdhofx Ag Sjh Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Designation: EN-JS 1025 Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 380 V, pressing force: 160 t, stroke length: 350 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, table width: 4,175 mm, throat depth: 500 mm, clearance between the columns: 3,300 mm, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, overall weight: 16,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system Guedjzybrropfx Ag Sjh 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Active hydraulic compensation LASER safety barriers Standard tool kit CE marking

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz Guedpfx Ajz Nwa Nsg Seh - Phase (Ph): 3.0 - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / Guedpjz Dun Eefx Ag Ssh 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. Guodpez Eiigofx Ag Sjh After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: PH-54114, For sale: high-precision optical measuring machine/scanner – VICI VISION - Model: MTP 120 – 230 SCEPM Gusdpoz Iyrksfx Ag Soh - Year: 2014 - Serial No.: PH 54114 For sale: a complete, high-precision optical measuring scanner—in like-new condition—designed for the accurate and rapid measurement of complex geometries, including radii, angles, irregular bores, gears, complex curves, ellipses, etc. The device offers high precision and is suitable for the rapid generation of inspection certificates meeting the strictest standards (e.g., for measuring Swiss watch gears). The measuring system has been maintained and serviced by the manufacturer, VICI VISION. It is an indispensable tool for serial production. The unit is connected to the power supply and ready for immediate operation.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Gedpfx Aoz D Tq Esg Seuh Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Guodpjzvvc Djfx Ag Soh Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Zwick / Roell Type: BDO-FB0.5TH Zwick / Roell tensile testing machine, table-top testing machine Material testing machine BDO-FB0.5TH Testing load in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of test area: infinite Test area depth: 100 mm Max. working distance without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Condition: used Scope of supply: (autosampler as shown in the picture) Gjdpfjzdr Hnjx Ag Sjuh (Subject to changes and errors in the technical data; details are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2016, condition: used, New: No Godpfxez H Rv Rs Ag Sjuh Field of application: Construction Serial number: 114255 Please contact Christopher Oldenburg for more information

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Gjdpen I Rqcofx Ag Sjuh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection Gedpfxoy R A Ape Ag Sjuh

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Gjdpfx Aoz Eby Rjg Sjuh Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: repair required (used), functionality: limited functionality, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, gearing type: other, battery capacity: 475 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,654 kg, total height: 2,140 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 PH-02 / 386 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.140 mm Closed height: 2.140 mm Free lift: 1.500 mm Mast: Duplex (2F314) Fork length: 1.000 mm Fork carriage: 2A Drive: Elektro Battery: 48V/475 Ah (2015) Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18x7-8 (40%) / 16x6-8 (10%) Service weight: 3.654 kg Length: 2.200 mm Width: 1.100 mm Year of manufacture: 2015 Operating hours: 14.180 h Condition: in need of repair EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Guodpoz Aqt Refx Ag Seh Sideshift Internal no.: 1308362 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HANDTMANN VF 608 plus | Portioning filler with paddle system Operating hours: 660 hours!!! Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model / Type: VF 608 plus Serial number: 459185 Year of manufacture: 2021 Power supply: 400 V / 50 Hz / 3 Ph / 4.3 A / power 3.0 kW Vacuum pump: Busch KC 0016 E 3Z0 (year of manufacture 2020, capacity 19 m³/h) Operating hours: 663.5 h Overall dimensions: 1000 x 900 x 2050 mm The Handtmann VF 608 plus is a professional portioning filler with a paddle system, a compact and versatile device designed for precise portioning, dispensing, and filling of products. It is ideally suited for meat processing plants, butcher shops, delicatessen facilities, and catering companies producing sausages, delicatessen items, or cheese products. The device utilizes Handtmann’s patented paddle system for feeding the product, which ensures exceptionally gentle processing of the raw material without crushing the product’s structure. The integrated, reliable Busch vacuum pump effectively evacuates air from the product, resulting in an excellent appearance of the final product’s cross-section and consistent weight for each portion. Thanks to the use of a modern servo drive and an intuitive control panel, the machine is extremely easy to operate, and changing parameters and product types is efficient with minimal loss of raw material. The robust housing made of stainless steel guarantees long-lasting durability and ease of maintaining stringent hygiene standards. Godpfx Aozzq N Aeg Ssuh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Guodpfxozizabo Ag Ssh Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment • Material starter kit PA11 ESD BASF Machine Benefits Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer Gusdpfxez E Hhas Ag Soh • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: good (used), Year of construction: 2005, Andreas Schmid Climate Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3 Air conditioning unit Regulation and Control Climate program controller SE 502 The climate controller contains 4 control zones Programmer 8 setpoints 32 control channels 400 segments 25 programs 8 loops per program Temperature range: -40°C to +130°C Temperature stability: +-1.0 K over time Average temperature change rate from -40°C to +80°C: approx. 3K/min Cooling system: Refrigeration compressor, water-cooled Refrigerant: R23 / R 404 A Cooling water inlet temperature: 15 Ambient temperature: 35°C Gusdpfx Agjuuibkj Sjh Heating system: electric resistance heating Electrical connection: 240/400 V, 3 PH, N, PE Power consumption Cooling mode: 24 A Heating mode: 18 A Dimensions: W x D x H 1600 x 800 x 2250 mm Chamber: W x D x H 670 x 640 x 750 mm Internal: TK16 You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2021, condition: like new (used), For sale: ANEST IWATA brand professional spray gun washing machine, models IWK SOL-B and IWK SOL-C (Model SLB/SLC), in perfect working condition. This equipment is designed for automatic and manual cleaning of spray guns and small components, using thinner, water, or water-based detergents. It is the ideal solution for paint shops, automotive repair shops, metalworking shops, or any industry that requires quick, safe, and efficient cleaning of spraying equipment. It includes complete technical documentation and CE certification. Key technical specifications: - Brand: ANEST IWATA (ANEST IWATA Europe S.r.l.) - Model: IWK SOL-B / IWK SOL-C (Model SLB / SLC) - Function: Automatic/manual washing of spray guns and containers up to 5 L. - Washing products: Thinner, clean water, or water-based detergents (pH 6.5 - 12). - Tank capacity: 25 liters per container (2 containers: clean and dirty). - Weight: 42 kg - Dimensions: 1100 mm (height) x 450 mm (width) x 660 mm (depth). - Maximum operating pressure: 10 bar. - Operating pressure: 6 - 10 bar (recommended: 8 bar). - Air consumption: 15.7 Nm³/h (at 8 bar). - Sound level: 77.7 dB (A) - Equivalent average level. - Certification: CE marking, CE declaration of conformity. - ATEX compliance: Group II, Category 2 G (Zone 1), suitable for potentially explosive atmospheres. - Applicable standards: Directive 98/37/EC (Machinery Safety), Directive 94/9/EC (ATEX), EN 12921-1/2/3, EN 13463-1, among others. Gjdpfez Rivxsx Ag Souh Features and advantages: - Efficient washing system: Includes a pneumatic membrane pump for clean and dirty detergents, a programmable timer, and vapor extraction nozzles. - Integrated safety: Safety valve that locks the pump when the door is opened, preventing splashing. External grounding to prevent electrostatic charges. - Easy maintenance: Robust design in stainless steel and galvanized steel. Accessible air and detergent inlet filters. - Versatility: Compatible with suction-feed and gravity-feed guns, with cup mounted or detached. - Model IWK SOL-C: Includes an automatic final wash function activated by a control button. Condition and maintenance: - Condition: New (never used) - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter cleaning, lubrication of the pneumatic system, pump inspection). Includes: Original documentation (User and Maintenance Manual, CE Declaration of Conformity).

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES Gsdetvmq Nopfx Ag Sjuh 20 SPARE CYLINDERS. PRINTING 4600000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Gjdpfx Agoz Aqb Us Ssuh Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.