Used Square Extension for sale (6,427)

Condition: good (used), Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm Itodpfx Aowu Rnbjnion -Weight: 3.1 kg/piece

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Ijdpfxsz Ix Uko Anijtn Technical specifications according to available documents. Subject to prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. Ijdpfoz Rvi Eex Aniotn After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Ijdez Nhliepfx Aniotn Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Iedpfx Asy Iycbsniotn Forklift available for loading.

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Ijdpfxeyxqigo Aniotn Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Itodpfoy Atrxjx Anion Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, color: white, Equipment: bathroom, hot water, lighting, For sale, by bid, is a two-story modular office building / container system. This is an opportunity to quickly and cost-effectively create additional office, administrative, or storage space. Currently used as an office/administrative building, this system offers ample space on 240 square meters on the ground floor and 180 square meters on the upper floor, for example, for 30-40 workstations. Here are the key facts about the system: - Absolutely watertight and free of any damage. - In very good, well-maintained condition. - Insulated according to ENEV 2009. - All rooms are equipped with radiators. - Fire protection report available. - Structural plans for the foundation available. - High-quality finishes in all rooms (floors mostly needle felt, walls mostly drywall). - WC sanitary unit for men/women. - Equipped kitchen with appliances. The system consists of 12 modules, 10x3x3 meters (LxWxH), and 3 additional modules on the ground floor (1 x 5.80x2.80x3.00, 2 x 5.80x3.0x3.0). Footprint 24x10 meters. Iodpfoz R T Efsx Aniotn Please refer to the attached drawings for the layout of the interior. The entire system is for sale – the furniture and equipment shown in the pictures are not included in the offer. The system will be available from mid-February 2027 and must be dismantled by the end of February 2027. The economic and organizational responsibility for dismantling and transport lies with the buyer. The original builder of the system is still active in the market, meaning that modifications, extensions, or adaptations to meet your own needs are easily possible. The builder is also available for dismantling, transport, and reassembly (upon separate order by the buyer). This ensures the best possible relocation of the building modules! Viewings are possible with short notice after prior arrangement.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: ALESAMONTI Model: MCS-100 Category: CNC Boring Machine Year of manufacture: 2010 CNC Control: HEIDENHAIN TCN-530M Machine weight: 17,500 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 3,700 mm Spindle Boring spindle diameter: Ø 100 mm Spindle nose: ISO-50 Tool holder type: DIN 69871 A50 Gear range change: Automatic, 2-speed Maximum spindle speed: 3,000 rpm Spindle motor power: 22 kW Spindle support: 350 mm Spindle extension support included Axis Travels X-axis – Longitudinal: 2,500 mm Y-axis – Vertical: 1,500 mm Z-axis – Transverse: 1,500 mm W-axis – Quill travel: 600 mm B-axis – Table rotation, continuous: 360° Minimum B-axis increment: 0.001° Rotary Table Usable table dimensions: 1,550 × 1,300 mm T-slots: No. 9 – 140 × 22 mm H7 Maximum permissible load: 5,000 kg Table rotation (B-axis): 360° continuous Angular resolution: 0.001° Feed Rates Working feed rates for axes X / Y / Z / W: 20,000 mm/min Rapid feed rates for axes X / Y / Z / W: 15,000 mm/min Measuring Systems HEIDENHAIN optical scales on linear axes Rotary encoder on the table Measuring system for axis positioning control Coolant and Chip Management Coolant collection tank Chip conveyor External washing pumps Coolant pump through the spindle Air system through the spindle Accessories 350 mm spindle support Spindle extension support Various ISO-50 tool holders Square Magnetic chuck Chip tank and conveyor External washing pumps Coolant system through the spindle Air system through the spindle HEIDENHAIN scales on linear axes Rotary encoder on the table Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features ALESAMONTI MCS-100 CNC Boring Machine Isdpfxoz Iappe Aniotn HEIDENHAIN TCN-530M Numerical Control Ø 100 mm boring spindle ISO-50 spindle mounting Automatic 2-speed gear change Maximum spindle speed 3,000 rpm Spindle power 22 kW X-axis travel of 2,500 mm Y-axis travel of 1,500 mm Z-axis travel of 1,500 mm W-axis quill travel of 600 mm 1,550 × 1,300 mm rotary table Table load capacity up to 5,000 kg Table rotation 360° continuous Table resolution 0.001° HEIDENHAIN scales on linear axes Rotary encoder on the table Coolant and air through the spindle Chip conveyor and washing system Complete with ISO-50 tool holders, square, and magnetic chuck Complete with manuals, electrical diagrams, and CE Declaration.

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS Iedpsx Agmyofx Anijtn CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Isdpfxezk U Afo Anijtn Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: T2C100295, The T2-C bridges the gap between compact, affordable desktop label printers and costly, large-scale commercial label presses to deliver a highly flexible and productive solution for medium to large volume label production. Outfitted with cost-effective 2-liter ink tanks, the T2-C offers an ideal balance of enhanced print accuracy and reduced ink costs, resulting in notable operational savings throughout its lifespan. - Rapid print speed up to 12 inches per second (60 feet per minute) - Superior image clarity with up to 1600 dpi resolution - Adjustable print width from 2” to 8.6” - Compact footprint – occupies less than 4 square feet - The first desktop press offering the throughput and precision of a full-scale digital press - The T2-C stands as the first high-capacity, high-volume tabletop label press able to sustain precision during extended print runs. Delivering consistent, large volumes in 24/7 production, the T2-C redefines possibilities in the label printing sector. This high-output tabletop press is perfectly suited for brand owners, print shops, and small-scale label converters aspiring to diversify their portfolio with high-resolution color inkjet labels. Furthermore, the T2-C operates quietly and, thanks to its compact 4-square-foot design, integrates seamlessly into any printing facility. Additionally, the T2-C produces commercial-grade labels with exceptional print resolution of up to 1600 dpi. The adjustable print width (2” to 8.8”) enables printing of multiple labels or single oversized labels in a single print job. Most importantly, with an impressive print speed of up to 12 inches per second, users can handle extensive print runs efficiently. Key Features of the T2-C: - Straight-feed, short web path for precise printing and minimized material waste - Servo-driven web handling and tensioning system for optimal media control Ijdpoyr Hx Ajfx Anijtn - Dynamic web guide with servo-controlled unwind/rewind shafts ensures precise registration, supporting full-bleed printing on pre-die cut labels and perfectly wound rolls - Advanced ink system and printhead combination extends printhead longevity and lowers ink consumption, reducing overall operating costs Advanced T2-C Ink System: - Yields approximately 500,000 4" x 4" (100 mm x 100 mm) labels at 50% ink coverage - 1.5 to 3 times increased lightfastness - Significant enhancement in water resistance - Improved black (K) ink performance while reducing Cyan, Magenta, and Yellow usage - Approximately 10% lower total cost of ownership versus previous ink formulations The T2-C is an optimal desktop label printing solution, providing both business owners and users with peace of mind through the perfect fusion of ease of use, precision, print quality, and reliability. Printer Specifications: - Print Technology: Memjet Waterfall Technology - Ink Type: Dye ink, 4 individual CMYK tanks or cartridge option - Print Resolution: 1600 x 800 dpi or 1600 x 1600 dpi - Print Speed: 6 ips (150 mm/s) or 12 ips (300 mm/s) - Maximum Print Width: 8.6”

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Itsdpfx Ajuiy Hrjnijn Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors Iodpfsykr Aqox Anijtn 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: new, CATALOGUE NUMBER: MR001 - New machine, DTR documentation + CE marking TECHNICAL DATA - Effective width: 2000mm - Front width: 2500mm - Depth: 600/850mm - Height: 1700/1950mm - Max. capacity: 9000m3/h - Fan power: 1.1kW Iedjx Uz Rmspfx Anietn - Speed: 2780 rpm - Electrical parameters: 400V-50Hz - Diameter of the outlet pipe – square: 500x500mm - Cardboard pre-filter - “Paint-stop” filters - Dimensions (L/W/H): 2500x850x2200mm - Weight approx.: 250kg The stated price applies to the standard version. Dry walls are used to extract mist from painting or coating processes. Extraction and purification of contaminated air is carried out by a dual filtration system consisting of: cardboard filters at the front of the machine and a “Paint-stop” filter. The wall is constructed from modular panels made of galvanized sheet metal. Equipment: – Painting wall with a two-stage filtration system (Paint Stop filter and Andrea filter) – Extension for the painting wall, increasing the width from 2000mm to 2500mm and the height from 1700mm to 1950mm – Multi-plane adjustable damper – Atex fan 9,000 m3/h – Soundproofed fan housing – Internal silencer, shape 380×700 L – 600 mm – Roof/wall exhaust outlet – side – Gasket for connecting exhaust ducts – Screw for connecting extensions and ventilation ducts Optional: – Fan power regulator – Mechanical filter – replacement of the cardboard filter with a steel mechanical filter – Third stage of filtration – adding a third stage of filtration using a synthetic fiber filter, to further purify the filtered air. – Ceiling with lighting – Internal silencer, shape 500 x 500 mm L – 600 mm – Wall extension (increasing the working area) – Recessed enclosure (increasing the working area) – Supply air system – Ventilation ducts – Connection fitting 600×600 – 135-degree elbow exhaust outlet (directs air downwards at a 45-degree angle) – Vertical exhaust outlet 500×500 with a reduction from 600×600 (discharges air vertically upwards, so that it rises several meters above the outlet and spreads evenly) Also available: Painting wall PRO 2000/1700/600 with 10,000 m3/h / 300 Pa explosion-proof radial fan – 1.5kW motor – 14,600 PLN / net, with the option to choose the fan arrangement on the right/left or rear side of the wall. Net price: 11,600 PLN Net price: 2,700 EUR depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Itsdpfx Asz Il Hysnion Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3CR00640, Leased Equipment – Return Inventory Model Serial No Lease End Date Line Description Final Meter Reading Itjdpfx Aez I El Nenisn imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A3 4,211,723 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A4 1,483,205 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A3 1,157 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A4 1,992,235 Canon imagePRESS C10010 VP 1 x Color Digital Printing System with Plockmatic BLM50 Booklet Finishing System Professional production printing solution for high-quality color and monochrome productions – including PRISMAsync workflow, high-performance paper feeder, high-capacity stacker, and extensive inline booklet finishing. System Overview Quantity 1 System Model Canon imagePRESS C10010 VP Printing Speed up to 100 pages/minute DIN A4 Printing Technology Electrographic Color Digital Printing Controller / Workflow Canon PRISMAsync Paper Feeder POD Deck-D1 Scanner Duplex Color Image Reader Unit-M2 Production Output High Capacity Stacker-H1 Booklet System Plockmatic BLM50 / BLM35 Booklet Maker with Upgrade Finishing Stapling, Folding, Front Trimming, Square Fold, Cover Feed, Rotate/Crease/Trim, Belt Stacker Color Management i1 Process Control v5.3 Printing Languages PCL6, IPDS, PDF for IPDS Equipment per System Canon imagePRESS C10010 VP Printing System • imagePRESS C10010 Series incl. Marking Engine • Fixing Station and Power Supply Unit • Operating Panel-A5 incl. Operating Panel Foot-D1 • Operator Attention Light-D1 • Canon Toner T02 – BK, C, M and Y • CABLE MAINS, C13 EUR PRISMAsync Print Server & Licenses • PRISMAsync for imagePRESS C10010VP-A1 • PRISMAsync Options Bundle C10010VP-A1 • PCL6 TP-J1 • IPDS-J1 and PDF for IPDS-J1 • PRISMAsync Remote Match imagePRESS C10010VP • imagePRESS C10010 License and Resale License Paper Feeder, Scanner & Production Output • POD Deck-D1 – High-performance Paper Feeder • Duplex Color Image Reader Unit-M2 incl. Reader Attachment Kit-B1 • High Capacity Stacker-H1 • DFD Interface Kit-A1 • Canon DFD Paper Path Kit 860-B1 Plockmatic Booklet Finishing System • Plockmatic BLM 35/50 • Plockmatic BLM 50 • BLM35 Booklet Maker • BLM50 Upgrade Kit • PLM Staple for BLM50 • FTR50 Trimmer Module – Front Trimming • SQF50 Square Fold Module – Spine/Square Fold Function • CF50 Cover Feeder Module – Separate Cover Feeder • RCT50 Rotate Crease Trim – Rotate, Crease, and Trim • BST 4000-1 Belt Stacker Module – Belt Stacker for finished booklets Color Management • i1 Process Control v5.3 for professional color calibration and reproducible production quality Key Selling Points Complete production line: 100-page/minute color printing system, PRISMAsync, POD Deck, duplex color scanner, high-capacity stacker, and Plockmatic BLM50 booklet system with front trimming, square fold, cover feeder, rotate/crease/trim, and belt stacker. Suitable for: professional brochure, catalog, manual, and booklet production, as well as demanding in-house and digital printing environments. Scope of Supply 1 × Canon imagePRESS C10010 VP with extensive Plockmatic Booklet Finishing System – corresponding to the configuration listed above.

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: Itodpfx Ajxpqzhenisn - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Iedpjuiy Ngsfx Aniotn Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: new, STRUERS Grinding and Polishing System Itjdsz Srm Nopfx Anisn Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 1995, condition: used, A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible. Itsdozybuaopfx Anisn

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Ijdpfx Anjy U Nqbeiotn

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Itodpfx Anjuiy Rqoion Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine Itsdpfxjy Hl Iys Anion 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Itodpfexranpsx Anisn Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control