Used Stas Osl 9.70 "Agrolight" 50M³ for sale (8,251)

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Dkjdpfx Adezr Tctsrer Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Dsdezr Tcaspfx Adrjkr Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: new, empty load weight: 2,520 kg, maximum load weight: 7,980 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 650 mm, wooden floor, 2 x ramps (2,500 mm long x 500 mm wide), ramps with spring lifters, ramps with gratings, 10 x lashing eyes, geared support winch with load and fast gear, front, 2 x supports, rear, chassis and body hot-dip galvanized, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dodezr Uiuspfx Adrekr

Condition: new, empty load weight: 2,520 kg, maximum load weight: 7,980 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 650 mm, wooden floor, 2 x ramps (2,500 mm long x 500 mm wide), ramps with spring lifters, ramps with gratings, 10 x lashing eyes, geared support winch with load and fast gear, front, 2 x supports, rear, chassis and body hot-dip galvanized, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dkodpfx Aozr R Umedrer

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Wide tires, loading height approx. 1,080 mm, 20 x lashing points, each rated for 6 tons, 20 x lashing brackets, each rated for 6 tons, 18 x lashing holes, 7 x center-mounted rung pockets, 14 x rung pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in design: €1,500, surcharge for extendable drawbar: €1,000, surcharge for 4 x warning signs with lighting: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,000 mm! -- Printing errors, mistakes, and changes reserved, sample images --, more data at: !, More details: ! Dedozrql Eepfx Adrokr

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loaded platform height approx. 940 mm, 20 lashing rings at 6 t each, 20 lashing brackets at 6 t each, 18 lashing holes, 7 stake pockets centered, 14 stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, plug-in type Price: €1,500; Surcharge for extendable drawbar Price: €1,000; Surcharge for 4 warning panels with lighting Price: €800; Also available with loading area lengths of 8,600 mm, 9,000 mm, or 10,000 mm! -- Subject to errors, misprints, and modifications, sample images -- More data at: !, More Details: ! Dkodpfx Adezqtxfsrer

Condition: used, empty load weight: 7,840 kg, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | STAS sliding floor | Type S300ZX, remote control | Tool box | 1 axle lift | Air suspension | Spare wheel holder | Unladen weight 7,840 kg, payload 28,160 kg | Tires: 385/65 R22.5 | SAF axles with disc brakes | Valid inspection report until 04/2026 | 10mm floor | Subject to errors, typing errors, and prior sale. Dkjdpozr R A Rsfx Adrer

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "AGRAR-LINER" First registration: 16.01.2024 Mileage: 243,148 km Dimensions (L x W x H): 10,142 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 End wall and side walls made of 3 mm HardoX steel HB450 Sloping end wall, interior with access ladder 2-leaf combination doors with pivoting function, pneumatic secondary release 2 grain slides with 1 dust cover Reinforced tarpaulin roof HYVA tilting cylinder, Alpha type, suitable for high and low pressure Aluminum landing legs, full load capacity 2 air vibrators mounted below the body SAF axles with large disc brakes, 430 mm Dedpfx Ajzth Hcsdrekr 1st axle: lift axle WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Lifting and lowering device Tires: 385/65 R 22.5 Aluminum ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it’s also available immediately in the FULL-SERVICE rental program.

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 8,500 mm, loading space width: 2,400 mm, loading space height: 1,500 mm, total length: 9,000 mm, total width: 2,500 mm, total height: 3,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Tare weight: 5360 kg, Gross vehicle weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2018, Body material: Aluminum, Side wall material: Aluminum, Drum volume: 28, Drum volume in: m3, Axle type: SAF, 28M3 alu, SAF, durabricht, Cramaro, lift axle etc. = Additional Information = General Information Dkjdpfx Adszqqw Ssror Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 9 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 6 mm Weights Tare weight: 5,360 kg Payload: 33,640 kg GVWR: 39,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 01.2027 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 7,810 kg, maximum load weight: 28,190 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 05/2027, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 1,40,000 mm, suspension: air, tire size: 385/65 R 22,5, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, aluminum chassis, color grey, air suspension with lift function, raising and lowering, loading volume 90, lift axle on 1st and 3rd axle, portal doors, disc brakes, fixed side underrun protection, toolbox, 2x LED reversing lights, 4x LED reversing lights on the sides (2x on the support gear and 2x behind the axle assembly), 1x LED spotlight inside the cargo area, broom and shovel holder on the left side underrun protection (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL, 10mm ribbed, with additional plastic guides beneath the floor profiles, double wing doors (1/2 - 1/2 with upper door crossbar), radio remote control, rear door impact protection - aluminum buffers across the full width of the rear wall, roof bows and tarp, maintenance flap front left, working platform with access ladder, roll-up tarpaulin (PVC tarpaulin, Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production 5/2025, like new condition!!! Dsdpfx Adozr Rwberekr

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Djdpfezr Tcgsx Adrokr Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side Dksdpfjzr Tcysx Adrjr

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 07/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,650 mm, loading space volume: 91 m³, Year of construction: 2021,

Condition: good (used), axle configuration: 3 axles, first registration: 01/1990, suspension: air, tire condition: 50 %, color: other, Year of construction: 1990, Equipment: ABS, = Additional options and accessories = - air suspension - Drum brakes Dkedpfx Adszrlvrsrsr = More information = Tyre profile: 50% Brakes: drum brakes Suspension: air suspension Tipper: Back Technical condition: good Visual appearance: good

Condition: used, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 8 mm; tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 10 mm; tire tread depth right: 10 mm Weights Unladen weight: 5,890 kg Payload: 32,110 kg GVW: 38,000 kg Dkjdpfx Ajzr E Riodror Condition Damage: None

Condition: used, axle configuration: 3 axles, first registration: 05/2007, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Rear axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 7 mm Rear axle 3: Aluminum rims; Tire tread depth left: 10 mm; Tire tread depth right: 12 mm Weights Unladen weight: 5,700 kg Payload: 33,300 kg GVWR: 39,000 kg Dkjdpfjzra Euox Adrer Condition Damage: None

Condition: used, maximum load weight: 34,740 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 8,870 mm, loading space width: 2,325 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,637 mm, Year of construction: 2026, Equipment: ABS, STAS 3-axle HardoX steel tipper, 45 cbm, "X-Shape" First registration: 03/2026 Dkedpfxoziwl He Adrjr New vehicle Dimensions (L x W x H): 8,870 x 2,350/2,450 x 2,100 mm (tapered design in width) Unladen weight: only 7,260 kg Z-chassis, curved design Floor: continuous 5 mm HardoX steel HB450 Front and side walls: 4/3 mm HardoX steel HB450 Sloping front wall, with internal steps 2-wing portal doors, pneumatic secondary release 1 grain slide in the right door leaf Reinforced roof cover, central locking HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU saddle supports, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side Dodpfev Dz Ixox Adrskr RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, maximum load weight: 28,155 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, Stas S300CX Tipping Trailer, Top Condition, Like New * SAF axles with air suspension and disc brakes Dkedpfx Asy I E Ehjdrsr * 1st axle can be lifted * Aluminum rims * Tires: 385/55 R22.5 * 2x plastic storage boxes * Aluminum side supports * Work platform with access ladder * Work lights * Tarpaulin roof We are happy to provide further information.

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Features: Lift axle Platform at the front wall Roll-up tarpaulin Grain sack Grain slide Dkjdozmdbpjpfx Adrer Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Dedoy U Syropfx Adrokr Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Dkedpfx Adjgcw Riorer Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Dedpfxozmcn Ue Adrskr Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, functionality: fully functional, axle configuration: > 3 axles, first registration: 05/2021, tire condition: 60 %, color: light grey, Year of construction: 2021, Universal gate / Steel chassis / HARDOX body Djdpfeznkv Nsx Adrekr CRAMARO tarpaulin / Pneumatic tires Aluminum rims 26 m3

Condition: used, empty load weight: 5,880 kg, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2026, suspension: other, Year of construction: 2020, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, ABS/EBS Disc brake Air suspension Lift axle Dkjdpfx Adszlui Isrjr Aluminum tipper body WZK, platform Neutral 2x grain discharge slides Portal doors Pallet width Roll-over cover 6x polished aluminum rims German vehicle + documents Location: 02625 Bautzen ... Suspension: Air - Lift, used vehicle, incl. VAT.