Used Suga Upper Support for sale (14,168)

Condition: good (used), Upper support Slide width 145 mm Height 72 mm Bolt circle diameter 180 mm Centring spigot diameter 70 mm Surface 240 x 220 mm Weight 23 kg Transport dimensions: L. 490 mm B. 220 mm Lodpodq Nvijfx Aqvshg H. 270 mm

Condition: good (used), Top support Lsdpfx Aqsb E Nw Ijvohg Base plate 300 x 320 mm Bolt circle 265 mm in diameter centering collar 100 mm in diameter Base plate to steel holder 185 mm

Condition: good (used), Obersupport Masse : L.530 x B.270 x H.350 mm Ljdpfx Aqob Eyb Aovshg

Condition: good (used), Top support Bolt circle 180 mm Lhodpfxoccrqfo Aqvog Depth 230 mm width 600 mm Height 460 mm

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table Lsdpfx Ajfnxxfoqvjhg -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 1080/530/H290 mm -Weight: 121 kg

Condition: used, Upper support, upper slide, dovetail guide -Rezess: Ø mm Lodpfx Aqsd Ebpmjvjhg -Hole circle: Ø mm -Dimensions: 121/295/H200 mm -Weight: 12 kg

Condition: good (used), Upper support, upper slide, dovetail guide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos Ledpfx Asfnxw Teqvohg -Dimensions: 830/610/H300 mm -Weight: 119 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos -Dimensions total: 450/155/H110 mm Lhjdpfx Ajxfzuwjqvog -Weight: 5.4 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm Lhjdpfx Asfnln Djqvsg -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Lsdpfx Ajfnqhieqvehg -Hydraulic unit: from automatic lathe SUGA type STS-2 -Manufacturer: Nachi Model VD 11B-25-25-AL -Motor: Toshiba type IK/FCKL3-I -Power: 1.5 kW/1400 rpm -Max. Pressure: 19.6 bar -Liter output: 25 l/min -Dimensions: 570/390/H250 mm -Weight: 51 kg

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Ledsp I I U Dspfx Aqvshg Weight: 185 kg.

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Ljdpfx Ajq E Ti Hoqvohg

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Lhedpfx Aqow Sfptsvog

Condition: used, #200112 Trumpf OW200/S (16-piece) 86.00° R4.00 / H=218.30 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 40 mm 2x 100 mm (reduced body 70 mm, 1x left / 1x right) 5x 200 mm 5x 300 mm Total length: 2820 mm ----- #200113 Trumpf OW201/S (18-piece) 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm (2x reduced body 70 mm, 1x left / 1x right) 1x 200 mm 7x 300 mm Total length: 2850 mm ----- #200117 Trumpf OW200/S (18-piece) 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 18x 100 mm Total length: 1800 mm ----- #200118 Trumpf OW/S (28-piece) 86.00° R1.00 / H=220.00 / 400 kN/m Segment lengths: 4x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 1x 50 mm 4x 100 mm 5x 200 mm 8x 300 mm Total length: 4170 mm ----- Lsdpfxey Anyde Aqvshg #200119 Trumpf OW200/S (25-piece) 86.00° R4.00 / H=218.30 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 3x 100 mm (2x reduced body 70 mm, 1x left / 1x right) 10x 200 mm 7x 300 mm Total length: 4555 mm

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Lodpfeiuvxbex Aqvohg Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen Lhedpfx Aqsttu Sgovsg ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: like new (used), Roller support, movable, for long profil Lhjdpfx Aqeh T Uxwjvog

Condition: used, diameter / mm Lhodey Supkspfx Aqvjg weight / kg Type / 0

Condition: new, load capacity: 3,000 kg, Various support blocks, rollers adjustable in 5 positions, suitable for heavy material. For transverse and longitudinal rotation. Bearing-mounted rollers insertable for longitudinal and transverse transport. Designed to relieve, for example, welding positioners or for transporting or rotating round parts. Available in various versions. Stepless height adjustment available on request. The beams themselves have a load capacity up to 6 tons. Price per piece. Prices from 450 €; with stepless height adjustment 850 €. Ledsy Rf S Hspfx Aqvehg

Condition: used, Type : Stirrer / Dissolver Wall support: manual Previous use: paint Lhodpfxsx R Ayhj Aqvog Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Up/down travel: 950 mm

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Ljdpfx Aqev Dauqsvohg

Year of construction: 2025, condition: new, functionality: fully functional, Partial segment UKB die / lower tool system AMADA 415 mm V16 R2 85° V22 R2.5 85° V35 R3 85° V50 R4 85° Partial segments UKB upper tool system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm Ljdpfoyqyc Ssx Aqvehg R 0.8 / 85° H 66.5 Furthermore, we offer a 835 mm die (manufacturer Eurostamp) which is structurally identical to the offered UKB dies. This die is slightly damaged, but fully functional and is offered for €70.00 if interested.

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Lodpjiffpxjfx Aqvohg Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: excellent (used), Top support Heyligenstedt (28493) Height of clamping surface to steel support 103 mm Length 690 mm Width 250 mm Lsdpfx Aottk Smsqvjhg Total height 240 mm Bolt circle diameter 225 mm Multifix basic holder size C Weight 56 kg

Condition: new, RIMORCHIO ECOSLIM 3 ASSI, NUOVO, SCARRABILE, ADR, ASSE CENTRALE SOLLEVABILE, FRENI A DISCO, BARRA STABILIZZATRICE, SOSPENSIONE PNEUMATICA CON LIVELLATRICE AUTOMATICA SEPARATA, BLOCCAGGIO CASSE IDRAULICO Lhodpfjh N T H Uox Aqvsg