Used Ta Instruments Hr-1 for sale (84,515)

Condition: like new (used), TA Instruments Discovery HR-1 – Hybrid Rheometer with Temperature Chamber Technical description of the device Manufacturer: TA Instruments, USA Model: Discovery HR-1 Series: Discovery Hybrid Rheometer Device type: Rotational-oscillatory rheometer Temperature system: Two-wing heating chamber, possibly an ETC (Environmental Test Chamber) Technical characteristics The TA Instruments Discovery HR-1 is an advanced hybrid rheometer designed for the precise investigation of the rheological properties of liquids, semi-finished products, polymers, pastes, gels, and viscoelastic materials. The device enables measurements in controlled stress mode, controlled shear rate mode, and oscillatory testing. The rheometer's design utilizes a precise drive system, a torque measurement system, and a gap control system. Technical parameters – Discovery HR-1 The following values are approximate catalog parameters for the HR-1 model and require confirmation for a specific device version. Parameter | Value ----- | ----- Type of measurement | Rotational and oscillatory Minimum oscillatory torque | approx. 0.5 nNm Minimum rotational torque | approx. 10 nNm Maximum torque | 150 mNm Angular speed range | up to 300 rad/s Oscillatory frequency range | up to 100 Hz Angular displacement resolution | approx. 10 nrad Gap control | Automatic Control modes | Stress, shear rate, oscillation Computer control | TA Instruments TRIOS software Temperature control system The device shown in the pictures is equipped with a two-part heating system that opens to the sides. The chamber enables rheological measurements to be carried out under controlled temperature conditions. System characteristics: * Two-wing design of the heating chamber. * Electric heating system. * Temperature control of the sample. * Possibility of conducting temperature studies. * Thermally insulated chamber elements. * Connections for the temperature control system. If the use of an ETC chamber is confirmed, the typical temperature range may be approximately -160°C to +600°C, depending on the configuration, cooling system, and accessories used. This range is not confirmed for the offered unit. Available research methods Rotational studies: * Viscosity measurement as a function of shear rate. * Determination of flow curves. * Study of the yield point. * Analysis of the behavior of non-Newtonian materials. Oscillatory studies: * Measurement of the storage modulus G'. * Measurement of the loss modulus G''. * Analysis of the loss tangent tan δ. * Frequency tests. * Amplitude tests. * Analysis of structural transitions of materials. Time and temperature studies: Lredpex E Sm Hjfx Akmju * Creep and recovery tests. * Stress relaxation. * Thermal stability studies. * Analysis of changes in rheological properties as a function of temperature and time. Configuration of the offered device Based on the photographic documentation, the set includes: 1. TA Instruments Discovery HR1 rheometer 2. Two-wing temperature chamber. 3. Accessories visible in the pictures 4. PC and software The device is a professional measurement platform designed for advanced rheological analyses in industrial and scientific laboratories.

Condition: used, TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.) -150 to 1,000 °C Temperature accuracy ± 1 °C Lrsdpfjzdyz Tsx Akmou Oven cooling time (air cooling)

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) Lrsdpfxjxt H Hhs Akmju > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 13E273E, For sale: National Instruments PXI-6221 Multifunction DAQ Module, in fully working condition. Lrsdpfx Ajzh Irzokmju Manufacturer: National Instruments (NI) Model: PXI-6221 Condition: Used – Fully Tested and Working Tested with: NI MAX – functionality verified Analog Inputs: 16 AI (16-Bit, 250 kS/s) Analog Outputs: 2 AO Digital I/O: 24 DIO Counters: Two 32-bit counter/timers Connector: 68-pin VHDCI Interface: PXI / PXI Express hybrid-slot compatible Driver: NI-DAQmx compatible Tested with NI MAX software and confirmed to be fully functional. All analog and digital channels have been tested and verified. Compatible with LabVIEW, LabWindows/CVI, and Measurement Studio. Ideal for laboratory automation, research, and production testing. Removed from a working industrial environment, no known issues. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Year of construction: 2009, operating hours: 43,824 h, condition: used, functionality: fully functional, controller model: PXI-8101, machine/vehicle number: PXI-8101, For sale: National Instruments PXI-8101 Embedded Controller, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-8101 Condition: Used – Tested and Working Operating System: Windows 7 (installed and activated) RAM: 1 GB Storage: 500 GB SSD Processor: Intel Celeron 575 – 2.0 GHz Lodpjzh Hnuofx Akmoru Interface: PXI Windows 7 is pre-installed and fully functional – ideal for older industrial systems that require Windows 7 compatibility. A large-capacity 500 GB SSD is installed for extended storage capacity. Removed from a working environment; no faults found. Shipping from Hungary. International shipping is available. Carefully packaged for safe delivery.

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 11ED18A, For sale: 2 National Instruments PXI-6511 Digital I/O Modules, in fully working condition. Both can be sold separately for €300 each. Manufacturer: National Instruments (NI) Model: PXI-6511 Quantity: 2 units Lodpezh H Sgjfx Akmsru Condition: Used – Tested and Working Channels: 64 digital input channels Isolation: Bank-isolated, ±30 VDC Interface: PXI Driver: NI-DAQmx compatible Both units are fully functional. Ideal for industrial automation, production line control, and testing systems. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packed with antistatic protection. Please contact us if you have any questions!

Condition: used, This listing is for a Grant Instruments QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Lredpfx Akoxv Az Hsmou Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Lrjdpfxey Ed S Ij Akmju Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   Lodpfxozdzifo Akmsru (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Lrsdpfx Aoxzg Eyokmou Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: used, functionality: fully functional, machine/vehicle number: PCI-6514, For sale: 2 National Instruments PCI-6514 Industrial Digital I/O Modules, in fully functional condition. The two units can be sold separately at a price of 250 euros each. Manufacturer: National Instruments (NI) Model: PCI-6514 Quantity: 2 Condition: Used – Fully Tested and Functional Tested with: NI MAX – operation verified Channels: 64 (32 inputs, 32 outputs) Voltage range: ±30 VDC Isolation: Bank-isolated Interface: PCI Watchdog timer for safe error handling Driver: NI-DAQmx compatible Ledpfxjzqywns Akmoru Both units have been tested with NI MAX software, and the operation of all 64 channels has been confirmed. Ideal for factory automation, industrial control, and manufacturing testing. Removed from a working industrial environment; no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 991379, total height: 15,000 mm, Here for sale is a sheet metal tower storage system Manufacturer: STOPA Type: HRGL-00016 Year: 1999 Serial No.: 991379 Fully automatic Max. sheet size: 1,250 x 2,500 mm Storage capacity: 690 tons Storage height: 15 m 230 storage locations Load capacity per compartment: 3,000 kg Control system: Siemens COROS OP25 Safety enclosure: Grid guard Roller shutter door Lredex Dazaopfx Akmsu High-bay warehouse equipped with 5 goods carrier towers Capacity per tower: 45 goods carriers Currently fitted with 164 goods carriers Complete price including weighing scale Collection only – disassembly and transport by the buyer or by arrangement If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information provided without obligation or guarantee, subject to errors and prior sale. Net export price For further questions, please call. Trade-in or exchange with compensation for your used vehicle is possible. We also accept defective, TÜV expired or damaged vehicles as down payment or trade-in. Trucks, cars, vans, construction machinery. Just contact us. Nous parlons Français / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can handle all customs and registration formalities for an extra charge. Delivery of vehicles to the port for an extra charge.

Condition: like new (used), The NI IC-3171 is a compact, fanless industrial controller designed for use in machine vision systems, industrial automation, quality control, and measurement applications. The device is equipped with an Intel Celeron processor, 4 GB of RAM, and a 32 GB SSD, ensuring stable and reliable operation in industrial environments and research and development laboratories. Lsdpfx Akszkazasmeru Other National Instruments devices and accessories are also available: PXIe-1085 – PXI Express chassis, sbRIO-9651 – embedded Single-Board RIO controller, NI IC-3120 – industrial vision controller, NI PCIe-8233 – 4-Port GigE Vision PoE frame grabber card, NI 8234 Dual Gigabit Ethernet Controller for Windows – dual-port Gigabit Ethernet controller, NI PXIe-8238 – dual-port 10 Gigabit Ethernet module for the PXI Express platform, NI PXI-6224 M Series DAQ – M Series data acquisition (DAQ) card, NI Vision Builder AI Development Kit – software license, NI Vision Development Module Run-Time (778044-35) – runtime environment license, NI PCIe-6509 – 96-channel 5 V digital input/output (DIO) card with NI-DAQmx support, Industrial Controller and CVS I/O Accessory with a 3 m long, 44-pin male-to-female HDSub cable, Panel Mount Accessory for IC-317X Industrial Controllers – panel mount kit for the IC-317X controller series. The controller runs on Windows Embedded Standard 7 (WES7) and is designed for integration with industrial cameras, data acquisition systems, and applications requiring continuous operation. Thanks to its fanless design, the device offers high resistance to dust, dirt, and mechanical failures associated with traditional cooling systems. Specifications Manufacturer: National Instruments (NI) Model: IC-3171 Type: industrial controller Processor: Intel Celeron RAM: 4 GB SSD: 32 GB Operating System: Windows Embedded Standard 7 (WES7) Design: Fanless Operating Temperature Range: 0°C to 55°C Application: machine vision, industrial automation, metrology, test & measurement Applications Machine vision systems, Quality control and production inspection, Industrial automation, Data acquisition and analysis, Industrial camera integration, Measurement stations, Research and development laboratories, Industrial applications operating in continuous mode. Key Features Compact industrial design, Fanless operation for increased device reliability, Support for machine vision systems and measurement applications, Ability to integrate with industrial devices and control systems, Stable operation in demanding industrial environments, Solution used in quality control systems and industrial automation. The device comes from equipment used in research and development activities related to machine vision systems, metrology, and industrial automation. The technical and visual condition corresponds to the product photos. The product is covered by a short-term warranty.

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Lrsdpfx Asv I Dmlekmeu Pitch circle of drive pin: 45 mm Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, or timeliness of this information.

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Lrjdpfx Akjrklxvjmou Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: good (used), Year of construction: 2012, operating hours: 1,027 h, NIFTYLIFT Nifty HR12NDE Articulating boom lift / work platform, HYBRID, Kubota diesel, 4x2, 2012 A video can be sent via WhatsApp. We have a continuous stock; please check our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without any obligation. Ljdpfezdut Rsx Akmoru Please call beforehand to schedule an appointment, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2014, throat depth: 300 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, overall weight: 3,800 kg, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, power: 5.5 kW (7.48 HP), pressing force: 40 t, clearance between the columns: 1,650 mm, table length: 2,100 mm, table width: 100 mm, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Lrodpfx Akezgfv Uemsu Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1981, operating hours: 1,000 h, call (Contact · Phone · Mobile · WhatsApp) Danubia Diesel / Heating Oil * With petrol engine * With hose for pumping * 1000 liter tank * Tank No.: A000436 * 2 units available Lodpfx Asn H Aiqokmeru * VAT margin scheme * Net price * All information provided without guarantee

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. Lsdpfx Aoytn Hkokmsru For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: ready for operation (used), Heidenhain HR 420 handwheel, part number 375 2639-01, serial number 19931995B, with connection cable. The cable has been repaired/insulated (see photos). Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Lodpfx Akezkxhlomjru

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, Equipment: ABS, Schmitz Cargobull SKI 24 SL 10.5 Scrap Tipper * RENTAL * Scrap tipper 55.5 m3 * SCB axles * Portal doors * Air suspension * Air steering * Lift axle * Roll-up tarpaulin * 3 cross braces for stability * Boost pressure gauge * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2 x 7-pin power connectors * 15-pin power connectors * ABS connection * Platform on the front wall * Folding underrun protection * Disc brakes * LED lights Lsdpfxev Ttx Uj Akmeru Rental possible! Subject to prior sale and errors! Sold exclusively subject to our terms and conditions. Important notice? Important information: Despite careful review of all details in our offer, errors may occur. These errors are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is provided without guarantee and therefore does not represent any guaranteed properties.

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 02/2007, loading space length: 5,020 mm, loading space width: 2,460 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechan. Ramps, front support, storage box, height-adjustable drawbar Ljdpfx Aowvikqekmjru Body: Tandem low loader trailer with mechanical ramps 2x BPW axles, drum brakes! Loading height approx. 930mm! Ramp length approx. 2600mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 410 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Lrjdpfx Aksuua Uzjmju Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set approx. 26 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * TGE 3.180 4X2F SB Panel Van * 8-speed automatic transmission, front-wheel drive * Reinforced suspension/damping and reinforced stabilizer bars * Disc brakes front, 16" * "ergoActive" driver's seat with suspension * "Comfort" passenger seat * Seat covers in synthetic leather "Mesh" * Heated driver and passenger seats, separately adjustable * Stone chip protection without Efficient Line (no CO2 optimization) * Comfort Package Plus * Daytime running lights with assistant driving lights * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Heated windshield washer nozzles front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Headliner in the passenger compartment as a molded headliner * Entry handle made of plastic on the B-pillar in the passenger compartment * Child safety lock, electrically operated * Side interior paneling in the cargo area made of hard fiberboard, half-height, with partial window paneling * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist front and rear * Cruise control * Traffic sign recognition * Rear view camera system with dynamic guide lines * Driver alertness and fatigue detection * Side wind assist * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG with ABH programming Ledpfx Akozc Dgxomeru * Alternator 230 A * Air conditioning system "Climatic" in the cab * 2nd battery (AGM battery) with separator relay and battery monitoring * 2nd heater and 2nd evaporator * One towing eye front * Trailer hitch, fixed * Wheelbase standard 3,640 mm (L3) * Mud flaps front and rear * Fuel tank 75 l * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony with inductive charging function, without external antenna connection * Fire Red (R3000) * Exhaust system, EU6e (EC) * Front-wheel drive * 4-cylinder diesel engine 2.0L, aggregate 03N.G * Automatic transmission, 8-speed * 4-cylinder turbo diesel engine 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recovery * Country cluster "WLTP EU approval" * Airbags for driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, anti-glare * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners front * 12-V sockets in the cab * Belt warning system, E-contact in the belt lock, driver and passenger seat * 2 remote key fobs * Keyless start * Auxiliary water heater, with remote control * Chrome package * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color (H3) * Rear step, over half the width

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Lredpfeuv Ecnex Akmeu Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Weight: approx. 363 kg Fully assembled as a set including 4 WKH 210 tool holders 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367