Used Emco Emcoturn E45 for sale (148)

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis Itjdpsxvcrxsfx Aanjr driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Iedpjw Rrvwefx Aanetr Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: like new (used), Year of construction: 2018, Technical Data: • Swing diameter over cross slide: 430 mm (max. turning diameter 220 mm) • Turning length: max. 670 mm • Spindle bore (clearance diameter): 45 mm Isdpfxowl Uu Hs Aanstr • HS spindle interface DIN 55026 A2-5 • Main drive power: 13 kW • Max. torque: 78 (100) Nm • Speed range: 0–6300 rpm • Counter spindle interface: DIN 55026 A2-4 • Number of tools: 12 driven tools, max. speed: 0–6000 rpm • Tool holder: VDI 25 • Pressure boost station E45 for central coolant system; centrifugal pump 14 bar; lifting pump min. 1.5 bar • Chip conveyor: hinge belt conveyor, discharge height 1200 mm • Swing loader Emcoturn E45 with loading and unloading system; 2-finger parallel gripper / 90° rotating module • Belt conveyor for RT parts feeding: length 1300 mm / width 567 mm; chain pitch 27.1 mm (1800L) • Control: Siemens 828 D ⸻ • Connected load: approx. 46 kVA • Voltage: 400 V / 50 Hz • Weight: approx. 4,300 kg • Space requirement: approx. 15 m²

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Iodpfeu Ibihsx Aanetr

Year of construction: 2001, condition: reconditioned (used), CNC turning and milling center EMCO ET332 MC with the following equipment: - 2 turrets with driven tools VDI25 - 1 slide (top) X and Z axis - 1 carriage (bottom) X axis - Main spindle with hollow clamping cylinder 45mm passage and C-axis - Counter spindle with Z axis, partial hollow clamping cylinder and C axis Itjdpfji Ik Anjx Aaner - Emco front loading system - chip conveyor - Oil mist extraction (electrostatic) - Machine was partially overhauled

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min Itjdpfx Aox Aq Hwsansr

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock Itsdswmzhpjpfx Aanjr 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders

Condition: excellent (used), Year of construction: 2015, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: EL 0551, bar length: 1,200 mm, bar diameter (min.): 10 mm, bar diameter (max.): 90 mm, Emco Compact Load E65 / E45 bar feeder for bar length 1200mm. This feeder was manufactured in 2015 and runs absolutely flawlessly. Since the associated CNC lathe has been sold and the buyer already had a bar feeder, our bar feeder is now being sold separately. The feeder is compatible with various models of Emco lathes. We used it on an E45. Sale is ex location 27801 Dötlingen, plus shipping by freight forwarder. Collection is also possible. Itedpfxoxu Dg Is Aanor

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Itsdpfx Aog Rcf Isanjr

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Ijdpoxvrv Tofx Aanotr Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Itedpfxeg Rcf Sj Aanor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: R2EV3502, turning length: 310 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total length: 1,630 mm, total width: 2,250 mm, overall weight: 3,300 kg, bar passage: 45 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage Travel Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main Spindle Spindle connection according to DIN 55026: KK5 Spindle outer diameter at front bearing: ø 80 mm Main Spindle Drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotational Axis) C-axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives AC motors in X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position dispersion Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool System Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Itedpfxswxwvao Aanor Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total connected load: 17 kW Machine weight: approx. 3.3 t Space requirement: 2.25 x 1.63 x 1.94 m

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 360 mm, turning diameter: 360 mm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, EMCO TURN 360 TURRET 12 Iodpfsx Hwa Uox Aanstr CONTROL : SIEMENS SINUMERIK

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: R2D N2802, turning diameter: 32 mm, The machine is still powered but not operational. The turret sub-spindle is defective. Itjdpfx Aajxrdq Usner

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Iodpfounzgrsx Aanstr condition see pictures

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Isdpfox D Dzdex Aanjtr Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, Original purchase price of the machine was over €500,000! Turning-milling center equipped with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle nose (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Counter spindle (BigBore 77) Counter spindle speed range: 0 - 4,000 rpm Counter spindle drive power: 29 kW Counter spindle nose (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck diameter: 250 mm Counter spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW EQUIPMENT Hollow clamping cylinder including draw tube Part ejector Through-spindle coolant for sub spindle Sinumerik 840D-sl/OPERATE CNC control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet Itedpfxjx Iz U Sj Aanor 3D simulation 2x 12-position BMT tool turrets C-axis for main and counter spindle TRANSMIT Software Chip conveyor Minimum quantity lubrication Control cabinet air conditioning unit Hydraulic unit Machine lamp 230 V power socket at the operator panel 5 leveling elements Documentation

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar Isdpfx Aaox H Tw Njnstr - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2012, operating hours: 15 h, functionality: fully functional, EMCO control system (PC control, Windows-based, 12.1" LCD screen, 1 x RS232, 2 x USB, 3 x LAN 10/100-bit) Table size 700 x 520 mm Max. table load: 500 kgs T-slots on the table: 5 x 18 x 100 mm X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Distance between spindle nose and table surface: 100–600 mm Speed: 0–10000 rpm Spindle taper: SK40 Rapid traverse X/Y/Z: 24 m/min Isdpfx Aaox Atv Uonjtr Feed rate X/Y/Z: 10 m/min Drive power: 13 kW Power requirements: 400 V / 3 PE Full load: 20 kVA Weight: 4200 kg Dimensions Dimensions (L/W/H): 2100 x 2500 x 2700 mm Equipment and accessories: - Coolant system - Tools - Machine feet The machine is in nearly new condition. It was used in a training workshop.

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). Itedpfox Hwfqex Aaner FCA D-75181 Pforzheim – loaded onto truck.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Itjdpfx Aox D Havoaner Milling

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). Itedpfx Aox Hwaneansr FCA D-75181 Pforzheim – loaded onto truck.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Isdpfx Ajx D Hwneanjtr Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), Control Unit Model 840 D Brand SIEMENS Main Drive Spindle speed range 0-5000 Tool taper VDI 30 Number of axis 4 Movement X-Axis Movement 260 mm Y-Axis Movement 80 mm Z-Axis Movement 610 mm Workpiece Workpiece drm 65 mm Tools Slots in storage 12 Media Chip conveyor Yes Additional Equipment Hainbuch collet chuck on main and counter spindle Parts catcher 10 tool holders (2 axial, 2 radial, and 6 normal holders) Emco LM 1200 loading magazine This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information. Application Types Itodpsx D Hflofx Aansr Turning

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 620 kg Main Drive Number of axis 6 Spindle Speed 5000 RPM Spindle motor power 29 kW Iedpfxjx D E Hbj Aanstr This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. Application Types Turning