Used Topper Vertical Machining Center for sale (72,310)

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm - Distance spindle nose / table: 100-630mm - Table size: 800x480mm - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW Gjdeztymhopfx Aatsbt - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification Gbodjzzlhaspfx Aatot • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Gedszzlh Hepfx Aatebt Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation Gbodpfxjzxckms Aatjt CE marking

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Gbsdpfozz Ndrsx Aatet Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Gbedpfx Aajzxhmtjtot Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Godezzbbcopfx Aatsbt Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Gedpfozx N Thjx Aatsbt Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Gbjdpfjzxf Insx Aatst Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call. Gbjdpfozxz Dfsx Aatot

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E Godpezz S N Rsfx Aatsbt table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. Gsdpjzy U Rusfx Aatebt The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! Gbsdpfszy Ukbjx Aatet The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. Gbodpowl N Tqefx Aatst The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,263 h, functionality: fully functional, machine/vehicle number: 1704080210, travel distance X-axis: 2,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,200 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 900 mm Spindle speed, max.: 6,000 rpm Spindle mount: SK50 Spindle drive: Geared spindle / ZF gearbox Internal cooling through the spindle available Table load, max.: 3,000 kg Table size: approx. 2,350 × 850 mm T-slots: 5 × 22 mm Number of tool magazine positions: 40 Tool mount: SK50 Machine weight: approx. 23,000 kg Gedjzy Ny Dspfx Aatsbt Operating hours: approx. 5,263 h EQUIPMENT 3 tool carts with tools

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Delivery is the customer's responsibility, but we can assist with packing and loading if required. Gbsdozy Efiepfx Aatjt

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Gbodpeyb S U Uefx Aatjt Touch probe Tool setter Through spindle coolant chip auger

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 406 mm, travel distance Y-axis: 304 mm, travel distance Z-axis: 254 mm, Haas #Mini-Mill vertical machining center, automatic tool changer (10 positions), travels X 406 mm / Y 304 mm / Z 254 mm. Tool changer: carousel type / Capacity: 10 tools Spindle speed: 10,000 rpm. Ideal for series production of precision CNC-machined parts. Godpfjzxzfpox Aatjbt

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Gbodpfx Aaszbvqgetet Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions Gjdpfx Ajd I R E Neatjbt • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gsdozz S R Uopfx Aatobt Subject to changes and errors in the technical data and information as well as prior sale!

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Gbjdszx A Tbepfx Aatot Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Gbedpfx Aozwxz Eeatst Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation. Gbsdpfsx N E Acsx Aatjt

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. Gbedpfx Aaszzdh Eotjt The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.