Vertical machining center

HAAS VM-6

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 10,887 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in) • Spindle • Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf) • Drive system: Inline direct-drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max weight on table: 1814 kg (4000 lb) • Feedrates and thrust • Max cutting feedrate: 12.7 m/min (500 ipm) • Rapids (X/Y/Z): 15.2 m/min (600 ipm) • Max thrust X: 15,124 N (3400 lbf) • Max thrust Y: 18,238 N (4100 lbf) • Max thrust Z: 24,910 N (5600 lbf) • Tool changer • Type: SMTC (side-mount) • Capacity: 30+1 • Max tool diameter (full): 64 mm (2.5 in) • Max tool diameter (adjacent empty): 127 mm (5.0 in) • Max tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Utilities • Coolant capacity: 360 L (95 gal) • Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi) • Minimum air pressure: 5.5 bar (80 psi) • Electrical Godpeyt Riujfx Ad Ujtw • Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A • Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A Technical Specification Taper Size ISO 40

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h Gtjdpfx Adsydvfcj Uew turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Gjdpfxel Si Uus Ad Uotw Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser Gjdpfow Rgcfjx Ad Uetw - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,931 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis HAAS VF-3SSYT with HRT 210 4X was manufactured in 2018. It features a 12,000-rpm spindle, 30+1 side-mount tool changer, and through-spindle coolant at 300 psi. The machine includes a 4th-axis drive, wireless probing system, and high-speed machining capabilities. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SSYT machine we have for sale. Contact us for more information about this machine. Additional equipment • High-Speed 30+1 Side-Mount Tool Changer / Advanced Tool Management / Early Power-Failure Detection Module / Multi-Stage Coolant Pump / Rigid Tapping Safe Run / Media Display M-Code; M130 / Power Surge Protection / Window Air Blast / Visual Part Programming System / User-Definable Macros / Spindle Orientation / Coordinate Rotation and Scaling / Chip Tray Filter Kit / CT-Style Tool Changer Grippers / Through-Spindle Coolant, 300 psi (21 bar) / 4th-Axis Drive and Wiring / Wireless Intuitive Probing System / Chip Auger / Programmable Coolant Nozzle / High-Speed Machining / Large Remote Jog Handle with Touchscreen Display / High-Volt Transformer, Non-USA Machine Benefits Gedpfeyalh Eox Ad Ujtw Technical Machine Benefits • Spindle speed: 12000 rpm • Standard program memory: 1 gb / control widescreen monitor • Remote monitoring: haasconnect / ethernet interface / wifi connection for the haas control • HRT rotary table is available for additional 9.000€.

Condition: used, Year of construction: 2002, turning diameter 1000 mm swing diameter 1250 mm turning height 1000 mm Control Siemens 840D total power requirement 110 kW Gjdpfx Ajxfwgped Uetw weight of the machine ca. 25 t

Condition: good (used), Year of construction: 2002, functionality: fully functional, 2-axis machine. Largest turning diameter: 1000 mm Largest swing diameter: 1250 mm Vertical slide stroke: 1000 mm Stroke horizontal slide: 1250 mm Spindle head according to DIN 55026: Size A 15 Spindle Ø in front bearing: 240 mm Drive 100% / 40% ED: 4.4 / 5.5 kW Speed range 1: 6.3 90 224 rpm Speed range 2: 25 360 900 rpm Feed rates: max. 14000 mm/min Rapid traverse: max. 20000 mm/min Turret head: 4 stations Round shank: Ø 60 mm according to DIN 69880 Connected load: 110 KW Weight: 25 tons The machine is still under power. Inspection possible at any time by arrangement. Gtodpfxsrx R S Us Ad Uew Price ex location. We will be happy to enquire about the costs for free truck.

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze Gtsdpfxev Rrq Ds Ad Uew feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Gtsdpfxsx Enh Ts Ad Uow This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2007, LATHE HAAS SL – 40 YEAR: 2007 SELF-CENTERING CHUCK DIAMETER KITAGAWA: 405 mm SPINDLE SPEED: 2,400 RPM BAR CAPACITY: 105.5 mm MAX. TURNING LENGTH: 1,100 mm MAX. TURNING DIAMETER: 650 mm DISTANCE BETWEEN CENTERS: 1,300 mm TOOL MAGAZINE: 10 POSITIONS CHIP CONVEYOR TOOL PRESETTING Gtjdpfjw Am Ruex Ad Uew CE-COMPLIANT MACHINE