Used Traub Tns 65/ 80 D for sale (61,068)

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Nedpfxet Hwq Do Adpscu Please ask for further details.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder Ncedpfjyc Nnzex Adpeu - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions.

Condition: used, Year of construction: 1992, machine/vehicle number: 690, CNC control Traub system TX8 D, with 1 turret with 14 tool stations and 1 turret with 9 tool stations, driven tools, max. turning length approx. 1000 mm, bar capacity 80 mm, power 73 kW, with fleece filtration system and chip conveyor. Ncodsy Sqimspfx Adpsu

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Ncodpfx Aezfkbasdpsu Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 87,094 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 450 mm, spindle motor power: 18,500 W, total height: 1,917 mm, total width: 2,076 mm, overall weight: 5,200 kg, controller manufacturer: TRAUB, controller model: TX8i, product length (max.): 4,354 mm, number of slots in tool magazine: 10, number of axes: 7, This 7-axis TRAUB TNC 65 DGY was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DGY horizontal turning machine we have for sale. Contact us for further details. • Control system: TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC• TX8i control with TFT color flat screen and electronic handwheel• Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz• Machine operating voltage: 400V 50 Hz• Accessories operating voltage: 230V 50 Hz• Control voltage: 24V DC• Designed for machining metals and plastics with defined cutting edge• Maximum turning length: 450 mm• Main spindle bore: 65 mm• Spindle through-hole: 65 mm• Maximum clamping diameter depending on collet system: 60 mm• Front bearing diameter: 66 mm• Standard collet: DIN 6343• Maximum clamping diameter: 65 mm• Main spindle torque: 230 Nm• Main spindle C-axis numerically controlled• X-axis rapid traverse/feed speed: 7.5 m/min• X-axis feed force at 100% duty cycle: 5000 N• X-axis ball screw: 32×5 mm• Z-axis rapid traverse/feed speed: 10 m/min• Z-axis feed force at 100% duty cycle: 8000 N• Z-axis ball screw: 32×10 mm• Y-axis rapid traverse/feed speed: 3 m/min• Y-axis travel: ±35 mm• Y-axis feed force at 100% duty cycle: 8000 N• Y-axis ball screw: 25×5 mm• Tool stations: 10 (14 optional)• Tool holder size: Ø30×55 mm• Alternative tool holder size: Ø25×48 mm• Tool shank size: 20×20 mm• Alternative tool shank size: 16×16 mm• Counter spindle maximum speed: 4000 rpm• Counter spindle maximum clamping diameter: 65 mm• Counter spindle power: 11 kW• Counter spindle constant power range: 1:8• Counter spindle torque: 210 Nm• Counter spindle rapid traverse/feed speed: 10 m/min• Counter spindle travel: 520 mm• Counter spindle feed force at 100% duty cycle: 6000 N• Counter spindle ball screw: 32×20 mm• Counter spindle C-axis with speed-synchronous control• Tool drive turret 1: 3.1 kW, 4000 rpm• Tool drive turret 2: 3.1 kW, 4000 rpm• Tool monitoring TX8i with wear and breakage control via axis motor monitoring• Thread cutting without compensating chuck• TRAUB Polyform software for milling programming with C-axis (front, longitudinal, cylindrical surface)• Ethernet network connection preparation with RJ45 interface• Z/V-axis counter spindle software with defined end position (face transfer)• Hydraulic system pressure: 70 bar• Hydraulic tank capacity: 70 l• Coolant pump pressure: 12 bar• Coolant tank capacity with chip conveyor: 435 l• Electrical connected load: 39 kW• Machine weight with counter spindle and electrical cabinet: 5200 kg• Noise level: 73 dB(A)• Permissible ambient temperature: 5–40 °C• Maximum relative humidity at 40 °C: 50 %• Work area turret section: 450 mm• Work area to counter spindle: 520 mm• Total work area: 728 mm• Minimum distance F to counter spindle contour: 127 mm• The machine has a Y-axis on turret 1, but not on turret 2 Additional equipment Ncjdpfx Adey Sg Niopsu

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. Nsdpfoxbtq Nox Adpocu The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Ncsdpfxox A Hdfs Adpeu

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Ncjdpfxjym A E Is Adpeu Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Nsdpfxjv Scrhj Adpecu

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Ncsdev Scrbspfx Adpsu

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Ncodjzgdbvspfx Adpju Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder Ncedpfx Adszfkgcopju • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Ncedpsu Eug Iofx Adpou With lots of accessories.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 1,24,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes Ncjdpfx Aoy R Uvujdpou • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2008, machine/vehicle number: 7041245, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, coolant system, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY Ncjdpsy Sqg Esfx Adpou

Condition: used, Year of construction: 2004, machine/vehicle number: 1057, CNC control TRAUB System TX 8 H, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets each with 10 tool stations, driven tools, KNOLL RP band filter system, chip conveyor. Njdoy Sqhijpfx Adpecu

Condition: used, Year of construction: 2007, machine/vehicle number: 7041219, CNC control Traub System TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452/500 Ncjdpoy Sqg Sefx Adpju

Condition: used, Year of construction: 2007, machine/vehicle number: 7041201, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets with 10 tool stations each, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452 Ncedoy Sqhcopfx Adpou

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer. Njdsyxg Swjpfx Adpecu

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Nodpfx Aex Er Rxedpjcu

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 12 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-6 Njdpfxjuhadzs Adpocu - Spindle power : 24 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 175 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 28 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 95 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.450 x 2.318 [mm] - Machine height : 2.258 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 50000 [h] EQUIPMENT - CNC : Traub TX8i-S - Electronic handwheel - 3 colors status lamp - Coolant tank : RESY * with high-pressure pump * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 6 - Number of fixed tool holders : 33 - Collet chuck : 2 HAINBUCH

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools Nodpfx Adsu Ix N Sopocu total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 Nsdowp D Nbjpfx Adpscu x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C33AEC509024, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 1.250 kg Functional Generator capacity: 65 kVA Dimensions of cargo space: 230 x 113 x 162 cm CE mark: yes Other information Fuel consumption: 13.7 Liter/Hour Prime Generator: Caterpillar M2506118 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 219 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Ncjdpfx Aezcuflsdpeu - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm Njdeyw H Szspfx Adpocu - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor