Used Union Heckert Df for sale (1,119)

Condition: excellent (used), Year of construction: 1990, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, Length:3500mm Width:1750mm Hodpfxsx Hwl Ds Aiyonl Height:350mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Hnsdsy Nbt Dopfx Aiyjl Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: ready for operation (used), Year of construction: 1978, X-axis: 8300mm Y-axis: 2500mm Z-axis: 500mm W-axis: 900mm Spindle diameter: 130mm Spindle taper: ISO 50 Rotary table: 2000x1800 2 x floor plates: 3500x1750 Year of manufacture: 1978 Hsdsy Skx Iopfx Aiysnl Milling head Tailstock DRO Heidenhain Spindle stabilizer Boring bar Many accessories

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls Hjdpfx Aow Uab Njiyjnl ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 680 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37,000 W, number of slots in tool magazine: 80, tool weight: 25,000 g, number of axes: 4, These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details. • Package: 2 horizontal machining centers + shared pallet storage system • STARRAG HECKERT HEC 500 H/V (2008) • Control: Siemens SINUMERIK 840D Powerline • Head: Swivelling H/V head (Horizontal/Vertical) • Pallet size: 500 x 500 mm Hodpoy Rr Axofx Aiyjnl • Travels: X 800 mm / Y 800 mm (vertical position) / Z 680 mm • Rapid traverse: 60 m/min • Spindle power: 37 kW • STARRAG HECKERT HEC 500 H (2009) • Control: Siemens SINUMERIK 840D Powerline • Pallet size: 500 x 500 mm (DIN 55201) • Travels: X 800 mm / Y 650 mm / Z 680 mm • Rapid traverse: 60 m/min • Spindle torque: 82 Nm • Max. tool weight: 25 kg • Max. tool diameter: 80 mm (160 mm with free adjacent places) • NC rotary table (B-axis): 360,000 x 0.001° • Note: Tool breakage detection system is out of service Additional equipment • Fastems FPC 1500 Linear Pallet Pool (shared by both machines) • Automation: Both machines connected to the Fastems FPC 1500 LPP • For HEC 500 H (2009): • Coolant system with paper band filter • Internal coolant supply, 50 bar • Chip conveyor Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Hnedpowrxqxjfx Aiyol Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: good (used), total length: 3,620 mm, total width: 2,025 mm, plate height: 350 mm, Manufacturer: UNION Type: Cast iron Year of construction: 2000 Specifications Metric US Standard Length 3620 mm Width 2125 mm Height 350 mm Number of T-slots 7 T-slot spacing / pitch 300 mm T-slot size Hsdpfxswp Hn To Aiyenl 34 mm Weight per plate approx. 5200 kg Number of matching pieces 5 Dimensions (Estimate) Length 3619 mm Width 2025 mm Height 350 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend you verify all important details.

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hsdpskwcdbsfx Aiyjnl

Condition: excellent (used), functionality: fully functional, Fully functional milling machine, in good working condition – has seen limited use in a small in-house mechanical workshop. Technical data: Working system and travels (XYZ axes): • Table surface: 1600 × 400 mm (extended versions available: 1800/2000 mm × 400 mm) • Longitudinal travel (X axis): 1120 mm • Cross travel (Y axis): 400 mm • Vertical travel (Z axis): 430 mm (mechanically driven to 400–410 mm) • Maximum table load: 1500 kg • Number of T-slots on table: 5 slots, width 18 mm, spaced 63 mm apart Spindle and milling head: • Spindle taper: ISO 50 / SK 50 • Spindle speed range: 28 – 1400 rpm (standard: 18-step adjustment) • Spindle quill stroke: 100 mm • Vertical head rotation: ±45° right/left • Distance from spindle axis to column: 450 mm • Distance from spindle nose to table: min 70–100 mm / max 500 mm Feed rates: • Feed in X and Y axes: 16 – 800 mm/min (18-step adjustment) • Feed in Z axis: 5 – 250 mm/min (18-step adjustment) • Rapid traverse speed (X/Y): 3150 mm/min • Rapid traverse speed (Z): 1000 mm/min Hjdoy Sgfdopfx Aiyonl Motors and electrical supply: • Main motor (spindle) power: 11 kW • Total power consumption: approx. 14.5 kW Dimensions and weight: • Machine weight: approx. 4000 kg • Working width/span: approx. 2000 mm • Working depth: approx. 1700 mm (with full table movement approx. 2900–3500 mm) • Machine height: approx. 2700 mm Standard features and functions: • Mechanical/automatic tool clamping: allows quick ISO 50 tool changes without physical force. • Centralized lubrication system: automatic oil supply for guideways.

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 130 mm Hnjdpfju Idrfjx Aiyel x-travel: 2750 mm y-travel: 1500 mm z-travel: 1250 mm B-axis (table): 360 W-axis (spindle longitudinal): 900 mm control for program: TNC 155 Bahnsteuerung / contouring control tool taper: SK50 table load: 6,3 t table-size: 1600 x 1400 mm table rotating: 360 ° range drill spindle revolution per minute: 3 - 1000 U/min total power requirement: 100 kW dimensions electric cabinet: L: 650 x B: 2800 x H: 2100 mm machine dimensions LxWxH: siehe Liste m weight of the machine ca.: ca. 15,0 t Contouring control Facing slide feed 210mm (U-axis) hydraulic unit Boom with control panel Measuring system Heidenhain *

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations Hsdpfjy Ipy Asx Aiyjnl • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Hsdpfey Rpm Uex Aiysnl Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Electronic handwheel Various tool holders can be purchased additionally.

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Hedpfx Aoy Rpkgeiyenl Pallet changer Coolant filter unit High-pressure coolant through spindle

Condition: excellent (used), functionality: fully functional, Table Type Boring Mill Spindle diameter: 90 mm Spindle taper: ISO 40 Speed range: 8 - 1,600 rpm Travel X-axis: 1,100 mm Travel Y-axis: 1,100 mm Travel Z-axis: 1,700 mm Travel W-axis: 600 mm 4-axis digital readout Table dimensions: 1,000 x 1,100 mm Rotary table: 360° (B-axis) Table load capacity: max. 2,500 kg Equipped with: - Large assortment of tools - Operating manual - Digital readouts on X, Y, Z, W Make: Union Table Type Boring Mill Spindle diameter: 90 mm Spindle taper: ISO 40 Speed range: 8 - 1,600 rpm Travel X-axis: 1,100 mm Travel Y-axis: 1,100 mm Travel Z-axis: 1,700 mm Travel W-axis: 600 mm Table dimensions: 1,000 x 1,100 mm Table load capacity: 2,500 kg Rotary table: 360° 4-axis digital readout Equipped with: - Many tools - Operating manual Country of origin: Germany Hnodpfxjy Rgnce Aiyel Spindle power: 23 kW Machine weight: 9,100 kg

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Hjdpfoy Rgm Eox Aiyjnl Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Hedpey Rgl Usfx Aiyenl Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Hnjdpfx Aiey Ed I Njyjl Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Hnjdoy Ed H Sepfx Aiyol Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: excellent (used), Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Hedpfjyr S Upsx Aiyenl Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: used, workpiece length 3250 mm swing diameter 630 mm grinding wheel diameter 900 mm Serveral Steadies Dresser Cooland System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Hnodpfx Asyqtubsiyel possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 102 mm x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm spindle taper ISO 50 bore spindle stroke 710 mm main drive motor 11 kW turning speeds 1600 U/min Feed 4000 mm/min Control Heidenhain type TNC 135 T-slot - width 22 mm T-slot - distance 140 mm table surface area 1250x1400 mm Table load 2500 kg total power requirement 23 kW weight of the machine ca. 9,3 t Rotating table 360° Hnjdpfjyqvmaex Aiysl The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control unit: Siemens Sinumerik 840D Number of axes: 4 Hsdpfxey Rmz Aj Aiysnl EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 slots for up to 8 pallets Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No reserve price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Hedey Rmnvjpfx Aiyonl High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Through-spindle coolant possible Tool magazine capacity: 120 positions Circular accuracy: 5 µm MACHINE DETAILS Control: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Double pallet changer Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben Hnedpfx Ajhv A A Djiyel type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: used, Year of construction: 1980, machine/vehicle number: 21403, functionality: fully functional, power: 4.2 kW (5.71 HP), input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 185 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 700 mm, total length: 1,300 mm, total height: 550 mm, throat depth: 320 mm, table width: 560 mm, table length: 460 mm, overall weight: 1,060 kg, WMW Heckert SABO Standard 40 Column Drilling Machine Including mounted rotary/cross table! Technical Data: Manufacturer: WMW Heckert Model: SABO / Standard 40 Drilling capacity (steel): up to Ø 40 mm Drilling capacity (cast iron): up to Ø 50 mm Spindle taper: MT4 Quill travel: approx. 185 mm Throat (spindle to column): approx. 320 mm Speed range: approx. 63 – 1000 rpm, 9 speeds Feed: approx. 0.10 – 1.6 mm/rev, 9 steps Table size: approx. 560 × 460 mm Vertical table adjustment: approx. 350 mm Table rotation: 360° Max. spindle-to-table distance: approx. 550 mm Hnsdoy H Hn Iopfx Aiysl Max. spindle-to-baseplate distance: approx. 1000 mm Reversible spindle rotation (right/left) Supplied with Albrecht quick-change drill chuck Ø 3 – 13 mm Baseplate size: approx. 440 × 490 mm Column diameter: approx. 220 mm Total motor power: approx. 4.2 kW Machine weight: approx. 1,060 kg Dimensions (L × W × H): approx. 1.3 × 0.7 × 2.5 m Year of manufacture: approx. 1980 (estimated), exact year unknown Condition: Fully functional Heavy-duty industrial build Ideal for precise metalworking and fabrication Transport / Shipping: Due to the weight (approx. 1.06 t), self-collection is preferred. Shipping by freight forwarder can be arranged if all costs are covered by the buyer. Legal Notice: All information provided to the best of our knowledge, but without guarantee; subject to errors and prior sale. Sale is made with exclusion of liability for material defects. This exclusion does not apply to claims for damages arising from gross negligence or intent on the part of the seller, nor for injury to life, limb, or health.