Used Ursviken Hydraulic Shipyard Dishing Forming Press for sale (29,332)

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Hfedekvmi Sspfx Afhoi Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) Hfodpfsh Uhqyex Afhei - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press, HYDRAP, type HPSK 25 Serial No. 6312, Year of manufacture 1989 Clamping force: 25 tons Ram stroke: 500 mm Reach: 300 mm Installation height: 700 mm Table surface: 1000 x 500 mm Table bore: Ø 210 mm Ram surface: 400 x 360 mm Dowel pin bore: Ø 40 mm Table height above floor: 855 mm Rapid traverse speed: 280 mm/sec Press speed: 3.5 mm/sec to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Power supply: 400 volts, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control unit - Measuring system for stroke adjustment Hsdpfx Aehrakvefhjfi - Press speed adjustable in infinitely variable steps via potentiometer - Pressure setting adjustable in infinitely variable steps manually via pressure regulator - Short-stroke device - Mechanical tool clamping on the ram with T-slots and dowel pin bore - Control cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control unit designed for electrical tool monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H: 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 33407, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 300 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table length: 3,050 mm, throat depth: 400 mm, ram plate length: 3,000 mm, distance table to ram: 570 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 5,700 mm, total width: 2,100 mm, total height: 3,685 mm, overall weight: 14,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Weight: 13500 kg Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Hfedpfozkxqmsx Afhoi Table: PP8170 V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000  Security; CE: PP3580 – lasersafe  PP8402 T1 T2

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed Hfodpfsvq Rtkex Afhoi - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw Hfedpstndu Uofx Afhsi UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Hfjdpfxecmat Ue Afhei the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. Hfedpju Axfcsfx Afhoi The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Hsdpfxjzdaxys Afhofi After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Hodpfszk E A Ajx Afhefi Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: used, Year of construction: 1986, functionality: fully functional, pressing force: 150 t, total length: 1,690 mm, total width: 1,440 mm, total height: 2,800 mm, No minimum price – guaranteed sale to the highest bidder! Hedpfx Ajzk A Ucofhofi TECHNICAL DETAILS Pressing force: 150 t Oil volume: 480 l Aftertravel: 30 mm Safety distance: 180 mm MACHINE DETAILS Total power requirement: 18.5 kW Dimensions & Weight Dimensions: 1440 x 1690 x 2800 mm Machine weight: approx. 4200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Hfedpszgzt Nefx Afhsi Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Weight 12T

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press Hjdpfx Aszhugxofhofi 800ton with overhead hydraulic tank and robot loading system.

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Hodpfezk Amrex Afhjfi Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: used, Year of construction: 2008, Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control system - 3 controlled axes (Y1, Y2, X) - manual Wila crowning table - 2 adjustable support arms - light barriers - incl. bending tools & operating manual - year of manufacture 2008 Technical data - Press capacity: 40 t Hjdozl Tkdopfx Afhsfi - Bending length: 2050 mm - Distance between uprights: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Overhang: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Hfsdjmqi Akjpfx Afhoi

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Number of working layers 1 layer Number of heating plates 2 pcs. Hjdszhv Svspfx Afhjfi Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: used, Year of construction: 2022, machine/vehicle number: 042-005844/1, overall weight: 8,000 kg, This ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press is being auctioned online as part of our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology – Presses and Metalworking location. Hfodpfjzk Ilaox Afhsi You can find this and many other items on our platform.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Hedpfx Afoyr Ek Rehjfi Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW Packed machine dimensions: 115cm x 85 x 180 (L x W x H)

Condition: used, Year of construction: 1992, machine/vehicle number: 97402, CHIESA SANSSON F1 PRESS FOR DIE CUT FORCE 60T. NEW BELT, FROM 2017 IS STORED IN THE WAREHOUSE Hfodpfxewff I Ds Afhei USER MANUAL AVAILABLE

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Hjdey U I Tuepfx Afhefi Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hfedpfxevuaqyj Afhji

Condition: used, große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Druck stufenlos regelbar / Pressure steppless Hjdpfowgd S Dsx Afhefi Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Hydraulische Presse - Hydraulic Press Tränklein ZP 39 Serial-No. 24088 1 Pressplatte / 1 pressure plate Size with max. 520 x 400mm Stapelhöhe / Stack height max. 360mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 400kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hedpfxowgd Skj Afhofi

Condition: used, machine/vehicle number: 87367728, Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Hedpfxormumdj Afhofi Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test