Used Veolia Evaporator-Concentrator for sale (599)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Bedjzvdftjpfx Abtsdg

Year of construction: 2005, condition: used, functionality: fully functional, Evaporation station for apple concentrate with an input juice capacity of 24,000 liters Bedpfsxn Ugfex Abtedg

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Bodpfxsxn Uq Do Abtjdg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Bdedpfx Abozvddceteg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Veolia Waste Water Treatment Spare Parts Package (Unused 2021) 2 x Alfa Laval Aldec 45 centrifuge (decanter) Process Application description: IW - waste water Process description: MUE, Biological sludge dewatering Max. density of compact wet cake: 1.3kg/dm3 at max. 4200rpm Bdjdpfjzb N Hhex Abtjg Bowl Maximum main speed:4200rpm Bowl diameter: 360mm DNF unit - upper tank - PPM 200CE - A DNF unit - upper tank - PPM 200CE - B 4x filter for Mn removal 3x reverse osmosis (RO) skid 3x powder activated carbon (PAC) dosing unit - Rittal JB 2x DNF unit - poseipump unit 3x unit blower ES145/5P-RVP300-spec 6x front filter Mn removal 2x DNF unit - recirculation pipe Spare parts can be seen in the asset list upon request. Please note pictures are representative and not of actual items Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement for (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) VEOLIA MIDI-RO 10-750-EP year of manufacture 2010 Bjdjzdri Nopfx Abtjdg 500 liters/hour energy-efficient reverse osmosis system

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Bedpeyxnffjfx Abtsdg Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Water: 5-7 m3/h; 1-10 bar Operation / Control: Switch cabinet with touch display Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Bodpfx Abow Tbunetjdg Pressure working area: 6 bar pressure class: 8,5 bar Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Voltage: 230 V Frequency: 50 Hz Weight: 390 kg Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Bdjdpfxsqrpd So Abtog Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg.

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Bodjxv A Uaepfx Abtodg Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. Bdsdpfxog N Db Hj Abtsg The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. Bjdpfeip Utaox Abtsdg CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Evaporator Guntner -Type: GHF 050.1D/47-A -Cooling capacity: 43.9 kW at DT8, 34.1 kW at DT7 Bodpfx Aozxzmaobtjdg -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 4380 x 700 x 860 mm -Place for electric defrost -Refrigerant: Freon -Volume: 54.4 L -Weight: 270 kg -Quantity in stock: 9 -Reference number: CH 612 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator Basetec Bdsdpfjzxzi Iex Abteg -Type: BSF 050.2J/37-ENS50.E -Cooling capacity: 47 kW at DT8, 36 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 3 x 500 mm -Dimensions: 3560 x 700 x 800 mm -Refrigerant: Freon -Capacity: 35 L -Stock quantity: 2 -Stock number: CH 616 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator Alfa Laval -Type: THOR-Z 326-10 Bedpfx Abozxzibstjdg -Cooling capacity for R404A: 18 kW at DT8, 15 kW at DT7 -Fin spinning: 10 mm -Fans: 2 x 500 mm -Dimensions: 2050 x 2200 x 1000 mm -Capacity: 40 l -Weight: 160 kg -Stock quantity: 4 -Condition: used in very good condition

Condition: used, Evaporator Alfa Laval Bjdpfx Aozxzgtebtedg -Type: THOR-Z 336-10 -Cooling capacity for R404A: 27 kW at DT8, 23.5 kW at DT7 -Fin spinning: 10 mm -Fans: 2 x 500 mm -Dimensions: 2900 x 1900 x 1150 mm -Capacity: 56 l -Weight: 222 kg -Stock quantity: 4 -Condition: used in very good condition

Condition: used, Evaporator Alfa Laval Bedpfx Abezxzfvotjdg -Type: THOR-Z 428-7 -Cooling capacity for R404A: 33 kW at DT8, 29 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2500 x 1870 x 1100 mm -Capacity: 64 l -Weight: 228 kg -Stock quantity: 2 -Condition: used in very good condition

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Bdodpfx Aoykrdbjbtsg - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Bedjucnzwopfx Abtjdg

Condition: good (used), Morgana PC42 Evaporator Twin fan, ceiling mounted Bjdpfx Aboqqhinotjdg

Condition: new, Year of construction: 2026, MRS Cleaner – cleaning and degreasing concentrate MRS Cleaner is a professional alkaline concentrate for cleaning and degreasing parts, machines, equipment, vehicles and metal surfaces. Its low-foaming formula makes the product ideally suited for use in industrial, pressure and automatic washers, as well as equipment with heated cleaning solution. The product is designed for effective removal of grease, oils and other contaminants generated during the operation of machines, vehicles and equipment. MRS Cleaner contains corrosion inhibitors and is recommended, among other applications, for cleaning engines, components and metal parts. Alkaline concentrate for professional cleaning and degreasing MRS Cleaner has been developed for applications requiring effective and efficient industrial cleaning. The alkaline formula facilitates the removal of stubborn dirt, while its low-foaming properties allow convenient use in equipment designed for cleaning parts and components. The product can be used, among other applications, for: degreasing parts and metal components, cleaning engines and components, cleaning industrial machinery, cleaning agricultural equipment and machinery, cleaning road machinery, cleaning passenger cars and lorries, cleaning forklift trucks, cleaning tractors, cleaning conveyor belts, cleaning containers, cleaning tarpaulins, removing dirt from metal surfaces. Which washers can MRS Cleaner be used in? The concentrate is intended for use, among other applications, in washers with a closed-loop working solution system. It can be used in: automatic washers, pressure washers, washers with heated working solution, equipment for industrial parts cleaning. Bedpfxezvayge Abtsdg The best cleaning results are achieved using an aqueous cleaning solution at a temperature of 40–80°C. Recommended concentration The working solution concentration should be adjusted to the type and degree of contamination, the sensitivity of the surface being cleaned and the selected cleaning method. Cleaning method Recommended concentration Immersion cleaning 5–10% Low-pressure cleaning 2–10% High-pressure cleaning 2–5% Concentrate pH value: 12.8 Recommended working solution temperature: 40–80°C 10% concentration – how much ready-to-use solution can you prepare? When preparing a 10% MRS Cleaner cleaning solution, 1L of concentrate can produce up to 10L of ready-to-use working solution. The high concentration of the product allows a large quantity of working solution to be prepared, making MRS Cleaner an economical solution for regular cleaning and degreasing of parts, machines and equipment. Key advantages of MRS Cleaner alkaline concentrate for cleaning and degreasing, low-foaming formula suitable for professional washers, contains corrosion inhibitors, concentrate pH value: 12.8, designed for cleaning parts and metal surfaces, recommended for cleaning engines and components, suitable for automatic and pressure washers, suitable for use in equipment with heated working solution, recommended operating temperature 40–80°C, wide range of applications in industry, automotive, agriculture and transport, at a 10% concentration, 1L of concentrate can be used to prepare up to 10L of ready-to-use working solution.

Year of construction: 2014, condition: excellent (used), Mineral Spiral Concentrator to treat pulp streams with a heavy mineral content Type K8LM5/2 Make: SWMS - South West Metallurgical Services UK Year: 2014 Condition: good, little hours 2 Units available complete documenation available Bodpfx Aogak Hljbtsdg

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Bedpfx Aezvllbjbtodg

Condition: used, Used Heidolph model Laborota 20 S (nowdays Hei-VAP) large scale rotary evaporator: Bdjdpfx Aew R Uafebteg - Glassware set A2C: includes one ascending, one descending condenser and one expansion vessel, one 20-l evaporating flask, two 10-l receiving flasks. - Speed of rotation: 6 - 160 rpm. - Stainless steel heating bath: 0 - 100°C (water) or 0-180°C (oil), 400 mm diameter with float switch and automatic inlet valve. - Power: 4000 W. - Timer: 0 - 99:59 hours. - Includes: Base cart, control panel, guard hood, rotation axis locking. - Dimensions: 970 mm x 620 mm x 1600 (height) mm. - Weight: 120 kg (withouth glassware set).

Condition: used, Evaporator Goedhart -Type: VCI-42637 -Cooling capacity: 29.5 kW at (-8/0°C), 20.9 kW at (-25/-18°C) -Fin spinning: 7 mm -Electric defrost -Fans: 2 x 630 mm -Dimensions: 2860 x 920 x 1130 mm -Volume: 38 L -Weight: 342 kg -Quantity in stock: 2 -Reference number: CH 589 Bjdpfx Abjzt Sfietodg -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work