Used Vollmer Pmh 10 U for sale (62,325)

Year of construction: 1987, condition: used, Vollmer hydraulic press Type PMH 10 U Dwedpjcbrq Tjfx Aptjb with fixture for band saw blades.

Condition: good (used), Vollmer GPA 10 U Machine for automated stelliting in the plasma welding process Equipped for band saw blades Dwsdpfx Aed Ernwoptjb with auxiliary feed with heavy-duty support tables

Condition: excellent (used), Complete Grinding Room for bandsaw blades Dwsdekx E Sdopfx Aptjb

Condition: used, Vollmer hydraulic press Type PMH 10 U Dsdpfx Aoci Dfhoptewb with support blocks in very good condition

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Dwjdpfx Apegxb Ebjtob Sheet thickness: 1 to 4 mm Width of band saw blades: 60 to 420 mm Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Condition: excellent (used), Vollmer GWM grinding machine for bandsaw blades. Dsdpfx Apod Sr Spstowb

Condition: good (used), Double side grinder for carbide saws VOLLMER model Finimat DUO TS 1000 Dwodpfxevgfifo Aptjb

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") Dodpjznkx Dofx Aptewb The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2012, KASTO U 10 / Metal circular saw with material support -CE marking -Year of manufacture 2012 -Cutting range / Round 90 degrees / 100x100mm -Cutting range / Flat 90 degrees / 90x90mm -Cutting range / Square 90 degrees / 170x90mm -Miter cutting device -Coolant system -Vise with counter-tension device for burr-free cutting Dwsdpszakq Esfx Aptob -Infinitely adjustable saw feed -2 saw cutting speeds -Dimensions of circular saw blade 350x2.5x32mm -Saw motor 1.8 kW Dimensions: L x W x H 1.2 x 0.8 x 1.9 meters / Weight 500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, total height: 1,340 mm, total width: 4,160 mm, power: 16 kW (21.75 HP), cutting width (max.): 1,060 mm, table height: 1,060 mm, We offer this used KASTO BBS U 10 serie 102 band saw, year of manufacture 2005. Manufacturer: KASTO Model: BBS U 10 serie 102 Construction Year: 2005 Condition: used Category ID: 1638 Type ID: 1756 Type: band saw Blade tension: • Blade width 54 mm: 55 bar • Blade width 67 mm: 60 bar Overall machine dimensions: (All dimensions related to the cutting length are shown on the following page) • Width (with protective cover open), approx.: 5,255 mm • Width (with protective cover closed), approx.: 4,160 mm • Height (with laser device), approx.: 1,340 mm • Height of loading magazine: 1,060 mm Power requirements: • Total drive power, approx.: 16.0 kW • Saw drive motor power, approx.: 7.5 kW Cutting capacity: • Minimum cutting width: 10 mm • Maximum cutting width: o with measuring stop: 900 mm o without measuring stop: 1,060 mm Blade speed: Frequency-controlled • Standard: 9–90 m/min • Option: 16–160 m/min Cutting feed: Frequency-controlled • 0.5–250 mm/min Blade dimensions: • 7772 × 54 × 1.6 mm or • 7772 × 67 × 1.6 mm Kerf width: • 2.4 mm Blade guides: • Three-roller guides, replaceable and adjustable Blade back guide: • Carbide wheel, replaceable Blade cleaning: • Easily replaceable motor-driven brush with plastic bristles Coolant system: Dwjdpfx Apoznza Ejteb • Flow through two nozzles Pump capacity, approx.: • 100 l/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 8031-010, overall weight: 1,500 kg, rotor diameter: 250 mm, number of blades: 20, total length: 2,150 mm, total height: 1,315 mm, total width: 1,515 mm, rotor width: 800 mm, power: 11 kW (14.96 HP), type of input current: three-phase, feed length X-axis: 800 mm, warranty duration: 1 months, input voltage: 400 V, This VECOPLAN VAZ 100/80 U was built in 2005 and is in very good technical condition. Currently disconnected but fully functional. Plug & Play with a 32-ampere plug. Ideal for shredding wood. Various wear parts are available. Please contact us for more information. Dodpszzcfcjfx Aptewb

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 560 kg, total width: 1,200 mm, total length: 1,600 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, We offer this very good Vollmer Unimat S sharpening machine, year of construction 2002. If you have any questions or need more information, feel free to send us a message or give us a call. Dwjdpfx Apozwczvotsb

Year of construction: 2021, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible. Dwsdpfszg Ir Sox Aptob

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 533 mm Travel distance Y :406 mm Travel distance Z: 483 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Hurco WinMax 9 spindle chuck: BT30 spindle revolutions: 30000 rpm Speed range to: 30000 U/min tool changer: 20 - time spindle cooling chip conveyor Manufacturer: HURCO Model: VM 10 UHSi Year of manufacture: 2013 Control: HURCO WinMax 9 Number of axes: 5 X-axis travel: 533 mm Y-axis travel: 406 mm Z-axis travel: 483 mm Spindle speed: up to 30,000 rpm Spindle taper: BT30 Tool changer: 20 positions Equipment: 5-axis machining HSC (High-Speed Cutting) Tool changer Spindle cooling Chip conveyor Tool/workpiece probe Renishaw touch probe The machine is particularly suitable for precise and demanding milling operations as well as applications requiring high spindle speeds. Dwodpfozx T I Nsx Aptob

Year of construction: 2020, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the manufacture and regrinding of solid carbide rotary tools is available. Grinding spindle interface: HSK50, max. workpiece diameter: 100mm, max. workpiece length: 360mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 350mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control system: Vollmer. Including automatic workpiece magazine HP160. Documentation available. An on-site inspection is possible. Dodpfxozg Ir Ej Aptjwb

Year of construction: 2022, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible. Dwodjzg Itcjpfx Aptsb

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition but fully functional. Year of manufacture: 1988, Machine No. 032-230 Including control cabinet! Comes with three complete sets of Leitz tools: - IV68 reversible cutting tool with standard profile - IV68 cornice profile for historic buildings - Tools for wood and aluminum windows The following tools are available (as shown in the pictures): Dwodpfxjzx Emds Aptsb 1x straight cutter, vertical and 1x horizontal 1x straight frame cutter, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile cutter, horizontal 1x tenon cutter, vertical 7 straight cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any warranty. Price upon request. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Dwodpfjzy Dziox Aptsb Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, Year of construction: 2000, functionality: fully functional, VOLLMER CX100 carbide circular saw sharpener CNC-controlled carbide circular saw sharpening machine Operates with oil and includes oil mist extraction In perfect working order Includes a grinding device Dwodpfx Ajznul Ijpteb

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Dodszwhuhopfx Aptjwb Saw blade diameter [mm] 80–500 mm

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009703, functionality: fully functional, Completely overhauled, delivery time 3-4 weeks Chamber oven for solvent-containing materials, compliant with DIN 1539 - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Max. temperature: 250°C - Controller: JUMO Imago 500 - Approved solvent quantity at max. temperature: 250 g / 46 g - Exhaust air flow rate: 6 m³/min - Additional equipment: 1 feedthrough, e.g. for thermocouples 3 heavy-duty grid shelves - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration - Current DGUV test report Inspection in our warehouse by appointment. Dedpezy Ihgefx Aptswb Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, tempering oven, paint drying oven, solvent oven.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Dwedpfjzxgmxex Aptob Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Dwjdpszf Nbxefx Aptsb

Condition: used, Year of construction: 1992, operating hours: 10,855 h, power: 92 kW (125.09 HP), Equipment: ABS, all wheel drive, cabin, Unimog 427/10 Winter Service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase: 2640 mm * Tires: 14.5R20 * Remaining tire tread: approx. 90/50% front, 80/50% rear * 1 diesel tank * Trailer coupling * Front and rear PTO * Front and rear hydraulic connections * Snowplow mounting kit * Raised exhaust Body * Küpper-Weisser HD, year of manufacture 1992, 1.7 m³ grit spreader body * Spreader can be parked on supports * Three-way tipper Cab / Driver's cabin * 2-seater * Roof hatch * Beacon lights Engine / Transmission * 5,958 cm³ * Manual transmission Dwedpfx Apswyy N Eotsb * 312,656 km Weights * Gross weight: 7,500 kg * Payload: 3,000 kg * Curb weight: 4,500 kg Miscellaneous * German vehicle * 1 previous owner New general inspections / safety inspections or load reductions/increases are available on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for misprints, typographical errors, prior sale, or changes!—Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², a large selection of vehicles can be found. Our company philosophy is characterized by fairness and credibility. Because customer satisfaction is particularly important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2005, operating hours: 1,262 h, Specifications: Travel speed 2.0-4.0 km/h, hydraulically adjustable undercarriage 750-990 mm, digging depth 1800 mm, 3-cylinder diesel engine, type D722-BH-6, 10.2 HP, dozer blade 990 mm, track width 180 mm. 2 additional hydraulic connections, bucket (360 mm) with teeth. Dsdpfxjicgugj Aptswb For sale to commercial customers only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see legal notice) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.