Used Würth K 200 for sale (48,262)

Condition: excellent (used), Suction capacity: 200 l / min effective delivery rate: 115 l / min Maximum pressure: 8 bar Drive motor: AC 230 V, 1.1 kW Container capacity: 9.5 l Space required: 410 x 340 x 630 mm Weight: 21 kg Ncodpfx Aqsd Nxbzjvet

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Ncodpfew Hc Spjx Aqvst Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: excellent (used), Year of construction: 1997, VA 200/6 K Notching and Punching Machine Indumasch VA 200/6 K Notching and Punching Machine 2 in 1 Manufacturer: Indumasch Model: VA206/K or DAV206 Year of manufacture: 1997 Hydraulic drive 5.5 kW Stroke adjustment: electric, with digital display Worktable (width x depth): 1,000 x 1,620 mm Net weight: 1,500 kg Workpiece holder: standard 2-in-1 – all advantages in a single machine from INDUMASCH! The first station offers stepless, angle-adjustable notching options from 30° to 140°. Additionally, a second station is located at the rear of the machine for operations such as pressing, punching, bending, cutting, and more. This model is ideally suited as a compact machine center for small-batch production and/or prototype construction. Nsdpfxjx Dtrfe Aqvjct Advantages of the first station: – Automatic cutting gap adjustment – High-precision measuring tapes with five reading functions – Internal stop for cutting sheet strips to length – Clean cuts, seamless beyond the length of the blades – Cutting head steplessly adjustable from 30° to 140° – Blade length: 200 mm – Cutting capacity in mild steel: max. 6 mm – Cutting capacity in stainless steel: max. 4 mm Advantages of the second station: – Digital stroke adjustment – Quick-change tooling system for punching – Clear, well-organized worktable – Pressing force: 20 t – Throat depth: 300 mm – Maximum punching diameter: 90 mm Indumasch_Notching Machines Brochure

Condition: used, maximum load weight: 28,590 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 10/2026, loading space length: 13,440 mm, loading space width: 2,470 mm, loading space height: 2,650 mm, loading space volume: 87 m³, Equipment: ABS, Vehicle No. for customer inquiries: 180 ----Equipment Highlights * SAF axles * 1st axle with lift function * Alcoa aluminum rims * Hydraulic system for walking floor * 270° portal doors * Air suspension * Disc brakes * Tire pressure monitoring system * Wheelbase: 9,060 mm * Cargo area dimensions: L: 13,440 mm W: 2,470 mm H: 2,650 mm * Payload: 28,590 kg ----Special Features * Primary color: white * ABS, EBS * Air-operated brakes * Ready to drive * Support legs * Spare wheel holder (basket type) * Foldable rear light cover * Aluminum frame * Connection plug 2x 7-pin * Wabco brake system * Connection plug 15-pin * Underrun guard with mudflap protection * Work lights * Side impact protection * Toolbox on left * Access ladder on right * Extendable rear ladder ----Technical Details: * HSN/TSN: 9649/000 * Suspension: air-lift * Wheelbase: 9,060 mm * Cargo area dimensions: L: 13,440 mm W: 2,470 mm H: 2,650 mm * Payload: 28,590 kg * Tire size: 385/65R22.5 * Tire tread: approx. 50% - 70% - 70% ----German vehicle! * 21,800.- Euro net plus VAT * Main inspection/emissions test (TÜV) valid until 10/2026, safety inspection until 04/2026 * For export to non-EU countries or within the EU, a deposit will be withheld and refunded upon successful customs clearance or delivery. * Worldwide delivery possible – please contact us for your individual quote! * We are happy to take your used vehicle in part exchange! * Financing/leasing options available even in difficult cases * This description serves only as general vehicle identification and does not constitute a warranty in the sense of purchase law. * The information provided is not guaranteed to be complete. The details/descriptions/pictures are non-binding and do not represent assured characteristics. * We assume no liability for errors or obvious mistakes. Ncsdpfxsyr Upvj Aqvst * The buyer is obliged to independently inspect the condition and equipment of the vehicles before purchase. * Price changes, typographical errors, mistakes, and interim sales reserved. * Dear customer, please understand that due to the age and mileage, we prefer to sell this vehicle to business owners or dealers. Thank you. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * * Internal number: 180

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Ncodpfxeqvuico Aqvot 37 cm height-47cm length-8cm

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Electrical connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf springs * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF % * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire size: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-on and skip containers * Roll-off containers 5000-7000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1020 mm * Platform length: approx. 7000 mm Ncjdpfxoy D E Ubj Aqvot * Pneumatic locking * Duomatic air connection Disclaimer: Subject to changes, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documentation * Arranging export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our qualified staff for advice – we are happy to assist you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41040 Fliegl, ZPS200K Ncjdpfx Aoy D E Uhsqvjt * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Storage box/toolbox * Galvanized * Pneumatic locking system * Suspension: Leaf spring * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m³ * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5000–7000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height 1020 mm * Platform length approx. 7000 mm * Pneumatic locking * Duomatic air connection Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export license plates/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approval, registration services * Transportation of commercial vehicles Contact our trained staff—we are happy to advise you.

Condition: excellent (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), input voltage: 400 V, We offer this very well-maintained Indumasch VA 200/6 K notching machine, year of manufacture 1999. Rated voltage: 400 V Ncedpeyrytmsfx Aqvjt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, valve control -Manufacturer: Bachmann, valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 KB 2525/00 -Quantity: 3x valve control available -Price per piece -Dimensions: 125/82/H35 mm Nodpfx Aeg Tizfoqvsct -Weight: 0.4 kg/pc.

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Nsdpfx Aqsw Tbnujvect *

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS-control via crane system controller make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V - without crane control - Dematik BUS control via crane system control - without roller trolley Mains connection: 400 Volt, 50 Hz Nodpjgd Ipnsfx Aqvsct rated power: 750 W rated current: 2,4 A good condition

Condition: ready for operation (used), Unitek 406 TVD-200-16 / TVD6-200-16 K Compact Transistor Regulator SN:005389, used, normal signs of use, 100% functional, scope of delivery as per photos Ncsdpfoxaifajx Aqvet

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Nodpfsi Ri Nusx Aqvect Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Ncodpfxelqwz Tj Aqvjt

Condition: excellent (used), Year of construction: 2005, Hedelius RS 60 K - 2000 Year of manufacture: 2005 Control: - Heidenhain iTNC 530 - Electronic handwheel Main spindle: - SK40 - Max. spindle speed: 15,000 rpm Travel paths: - X – 2000 mm (775 + 600) mm, Y – 620 mm, Z – 520 mm Table: Nedpfx Ajy H D S Doqvoct - Clamping area fixed table 1200 x 600 mm (left working area) - NC rotary/tilting table (right working area) - NC rotary table, 360° rotatable / tilting +15 / -95° Coolant: - 20 bar through-spindle coolant (IKZ) - Chip conveyor Extraction: - Emulsion mist extraction system Delivery time: - Immediately available

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm Nsdpsyw Tupefx Aqvoct F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. Ncodpfx Aqeyxtfwsvjt This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging Nedpfx Aeywu Uqoqvsct APPLICATIONS Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Nedpfey Tuxuox Aqvjct Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.46 linear meters wide-span racking, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 11.46 linear meters Racking offer includes: - 07 x frames approx. 200 x 60 cm, disassembled - 36 x beams approx. 185 cm - 18 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per level, with evenly distributed load - Levels: 3 storage levels Ncedpfx Aqoy Tuxhovst - Chipboard shelves, natural finish - Blue uprights - New stock, available for immediate delivery - Other quantities available on request Frame pre-assembly can be provided by us for a small additional charge of €6/net per unit. Delivery at favorable rates available on request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €965.00 net Plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner freight forwarder upon request. Transport costs depend on the destination postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 7.65 linear meters wide-span shelving, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: - 05 x frames, approx. 200 x 60 cm, disassembled - 32 x beams, approx. 185 cm - 16 x shelf panels, approx. 184.5 x 79.5 cm - 32 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load Nodpfx Aqjy Tuxbevjct - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New goods, available from stock - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6/net each. Delivery available on request at competitive rates. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus VAT as required by law. You will receive an invoice with VAT shown separately. Transport: Delivery is performed as requested by our partner shipping company; cost depends on postal code. Assembly: Our trained staff are at your disposal, providing professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins Ncjdpfx Aqey Tuw Dovst - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 7.66 meters long-span shelving, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 7.66 running meters (lfm) Shelving offer includes: - 05 x frames approx. 200 x 60 cm, disassembled - 32 x beams approx. 185 cm - 16 x shelf boards approx. 184.5 x 59.5 cm - Includes securing pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard shelf, natural finish - Uprights blue - New stock, available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6 (net) per piece. Delivery available upon request at competitive rates. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Njdpfey Tuvtox Aqvect Price: €815.00 net plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery by our partner forwarding company is available on request; costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. Nsdpfxjy Tuvas Aqvsct - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.45 m Long-Span Racking, 80 cm Deep – Workshop Shelving, Warehouse Racking, Wide Span Shelving, Manual Storage, Shelving Systems, Small Parts Storage Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 11.45 linear meters Rack offer includes: - 07 x frames, approx. 200 x 80 cm, disassembled - 36 x beams, approx. 185 cm - 18 x shelf panels, approx. 184.5 x 79.5 cm - 36 x load distribution bars/crossbars - Incl. safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Shelves made from natural chipboard Nsdpfx Aey Tuu Njqvjct - Uprights in blue - Galvanized crossbars - New stock, available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,175.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Delivery: Delivery can be arranged by our partner freight forwarder on request. Cost depends on the delivery postcode. Assembly: Our trained personnel can assist you with professional assembly and disassembly of your equipment as required. Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning to ordering and installation.