Used Weiler Praktikant Oder Matador for sale (794)

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Hsdpfxjy Ra Dqs Ai Donl Very good condition

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: Hsdjhy Tdyspfx Ai Dsnl - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 19800 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Hodjyycwxepfx Ai Dsnl Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Hjdpfx Aoy Rpr Rji Djnl Guideways are in good condition, machine documentation available.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm Hnedpfxoxndbfs Ai Dsl tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinevideo - ?v=B9svaSOEWiY Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Hsdpfxey Hxp Dj Ai Donl Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: Hsdsy D N Daepfx Ai Donl - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: good (used), Please read the technical specifications in full. If the machine is a potential investment for you, we kindly request your complete credentials, including a valid telephone number and email address, for a quotation. WEILER Precision Lathe MATADOR with HEIDENHAIN 3-axis Digital Readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Hnsdpfexx S Hdjx Ai Del Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 size 5 Spindle bore: 36 mm Speed range: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill stroke: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data not binding! Robust lead and feed screw lathe for the workshop and the advanced DIY user. Condition: good Features: - 3-axis precision HEIDENHAIN digital readout - Quick-action lever collet chuck - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/swarf shield - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slides Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Hnjdpfxey Hi A Ij Ai Djl Inspection under power possible in 5023 Salzburg. Forklift available for loading.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake Hnodpfx Aieyylq Uj Dol >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching Hnjdpfx Ajyylqhoi Dol >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Hsdpfeyyb T Sjx Ai Donl Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Hodpfsyg Rfijx Ai Djnl Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Hnjdpfxeyucd To Ai Del Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz Hjdpfxsyr R Dcs Ai Dsnl - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Hedpfx Aonkad Sji Denl

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Hnsdoxp Ru Ujpfx Ai Del

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Hodpfsx Sqvgjx Ai Denl

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Hnsdpfx Aexp Rvlei Dsl

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm Hjdoymdymspfx Ai Dsnl - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Hnodpfox I Rtkex Ai Dsl Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Hnsdpfjyciw Aex Ai Dsl Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Hedpfx Aisypbypj Denl Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Hnedpow Sdr Hjfx Ai Del Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: new, Year of construction: 2025, GSD Intern Hnsdpfxjwhzcpo Ai Dsl One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.