Lathe

Weiler Matador

Condition: used, Year of construction: 1987, machine/vehicle number: 7826, This WEILER lathe, model Matador VS 2, will be auctioned off online as part of our industrial auction / machinery auction for inventory clearance at Siemens Ruhstorf – including measuring technology, electrical engineering equipment, office furniture, and office supplies, among other items. Hsdpfezg S Hyjx Abhjp You can find this and many other items on our platform.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Hjdev Tk Exepfx Abhjp Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: good (used), functionality: fully functional, Internal article number: 26062 Lathe Weiler Matador + Multifix "A" base plate + 3-jaw chuck + Collets Center height approx. 150mm Turning diameter over cross slide 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Spindle speed range 30 - 3500 rpm Automatic longitudinal/face feeds Hedpfszfhx Nex Abhop Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm Hsdexacgdspfx Abhop spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm Hedpfxotzf N Re Abhop -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Hodpfeypbypsx Abhsp Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg Hsdpfxey Hxp Do Abhop dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Hedjrivluepfx Abhop Misc.accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Hjdjxmakyjpfx Abhop Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: ready for operation (used), L & Z Spindle Lathe WEILER MATADOR, from a vocational school -Center height approx. 150mm Hedpfx Ajzdzpljbhjp -Swinging diameter over the carriage approx. 160mm -Swinging diameter over the bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600 kg Errors and omissions excepted.

Condition: used, Pillar drilling machines Hodpfx Absb N Ezrshop

Condition: ready for operation (used), L & Z Spindle Lathe, WEILER MATADOR, from a vocational school -Center height approx. 150mm -Swinging diameter over cross slide 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal/facing feeds -Tailstock MK3 Hedpfxszduyqj Abhop -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Subject to errors and omissions.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe Hodpfxoxq Hhye Abhsp - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Space required: 1070 x 650 x 1180 mm Hodpfx Abobx Elishsp Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: ready for operation (used), L & Z lathe / WEILER MATADOR from a vocational training center -Center height approx. 150mm -Swinging diameter over carriage 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3550 rpm -Automatic longitudinal / cross feeds -Tailstock / MK3 -Three-jaw chuck -Chip guard -Coolant system -Work light -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Hjdszb Rm Aepfx Abhjp Errors and omissions excepted.