Used Weiler Weiler E35 for sale (351)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Cgodpfx Ajy R Uukoiaou Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Cgedpoy Rx A Sjfx Aiaou Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details. • Control: Siemens Sinumerik 810D with Weiler D1 user software • Display: 12.1-inch TFT color flat screen • Operating voltage: 400 V • Control voltage: 24 V • Connected load: 14 kW • Nominal current: 26 A • Frequency: 50 Hz • Main fuses: 35 A Cgsdpfxey Nlvcj Aiaeu • Coolant unit: 30 l/min at 0.4 bar • Tool holder: Multifix quick-change size B • Features: Teach-in functions; graphic-supported contour programming; V-24 interface; electronic handwheel for manual contour following Additional equipment • Included accessories: 1 change holder; fixed center point; spindle plug; key set; manuals; chip protection wall; movable splash guard; chuck guard with limit switch monitoring • Optional equipment included: Fixed steady rest with roller jaws (12–150 mm); adjustable hollow spindle stop; lever-operated collet chuck for DIN 6343-48 (173E) Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 950 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 950 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, workpiece weight (max.): 900 kg, turning diameter over top slide: 400 mm, bar passage: 54 mm, chuck outer diameter: 250 mm, swing diameter over top slide: 400 mm, center height over cross slide: 200 mm, Turning lathe WEILER E35 Year of manufacture: 2001 Control system: Weiler D1 Spindle speed: 1 - 3,000 rpm Chuck diameter: max. 250mm Bar capacity: 54mm Center height: 200mm Distance between centers: 950mm Accessories: Coolant system Various tool holders Cgsdey T Iptopfx Aiaeu Chuck jaws The machine was used in a training workshop.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z) Technical Specification Counter Spindle No Cgjdpey Axu Sjfx Aiaeu Driven Tools No

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Codpfx Ajk D S Rqsiajgu Control: WEILER Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1994, functionality: fully functional, turning diameter: 410 mm, spindle bore: 54 mm, rotational speed (max.): 3,000 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,500 mm, workpiece weight (max.): 700 kg, overall weight: 2,100 kg, For sale is a Weiler E35 lathe. The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Between centres: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions (approx.): 2,200 x 1,500 x 1,800 mm Weight (approx.): 2,100 kg Transport and loading can be organized Europe-wide for an additional charge, upon request. Prices are exclusive of VAT. Inspection possible by prior appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Cjdpexu Ehgofx Aiaogu Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance Cgjdpfjyalulox Aiaou - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm Codjyrh Apopfx Aiaegu spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: used, Collet set, rotary tool chuck collet holder for draw-in collets Cgsdpfszbhu Dex Aiaju Collet chuck, collet holder, collet system Suitable for BOLEY - LEINEN - SCHAUBLIN - WEILER Draw-in collet type: 367E K28 DIN 6341 Collet diameter: 28 mm Collet length: approx. 105 mm Collet thread: TR 28 x 1.5 mm Collet taper: 40° - Draw tube with internal thread M 28 x 1.5 mm, handwheel for manual tightening of the collet - Length of draw tube to stop collar inside the handwheel: 457 mm - Outer diameter of draw tube: Ø 31 mm over a length of 390 mm, Ø 32.5 mm over a length of 67 mm - 31 draw-in collets: Ø 1 / 2 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20.5 / 21 / 22 / 23 / 24 mm Total weight: approx. 10 kg Good condition

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V Csdpfxexq Hhyj Aiaogu weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. Cjdpeyiztiefx Aiaegu FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2003, Machine type CNC turning and milling center Manufacturer WEILER Type DZ 67 / V3 Year of manufacture 2003 Condition Used Control system type CNC Control system Siemens 840 D Location D-64625 Bensheim Turning diameter 220 mm Turning length 450 mm Control system Siemens 840 D Tool turret SAUTER VDI 30 - 12x Tool holders Cgedpfeza Aqwox Aiaou Various VDI 30 Bar feed LNS Quick Load Servo 3 mm Collets Various collets Main drive DC 27 kW Total power consumption 27 + 8.5 + 5 + X kW Machine weight approx. 6.5 t Space requirement approx. 10 x 2 x 2 m Additional information Various accessories - Collets - Chuck jaws - VDI tool holders with and without drive - Documentation

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Csdpsza Anpefx Aiaogu Turning length 190 mm Control system BOSCH CC 200 Total power consumption 12 kW Machine weight approx. 1.6 t Space requirement approx. 2 (9) x 1.5 x 1.8 m

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Guide and Pull Spindle Lathe with 3-Axis Digital Readout K&C NEW Excellent condition!! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2993 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> Collet chuck system, new, collets new from 3 to 26 mm, increasing in 1 mm increments >> 3-jaw chuck NEW 160 mm with jaws >> 4-jaw chuck, several sets of jaws >> Mulifix size A with 3 steel holders >> Change gears >> Electric chuck guard >> Bed stop >> Back panel Cgodeza E Hzspfx Aiaou >> Machine feet >> Coolant system About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured to toolmaker's precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely disassembled and repainted in light gray. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that appear to be ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and convince yourself of its condition.

Condition: ready for operation (used), turning length 450 mm Cgsdpfx Aszbc Dtjiaeu turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. Cgjdpszbc Dasfx Aiasu - EMERGENCY OFF button at the front

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor Csdpfx Aijy H E Akjaogu • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. Cgodpfx Asy D N Dajiaou The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle automation. The machine is in very good condition, considering its age. Maintenance has been documented. The Brio milling attachment allows for milling operations such as hexagon milling and the milling of grooves. Year of manufacture: 2002 Control system: Siemens Work area: Swinging diameter over bed: 900 mm Swinging diameter over cross slide: 530 mm Bed width: 600 mm Turning length: 6000 mm Spindle and drive: Spindle bore: 128 mm Spindle diameter in the front bearing: 178 mm Speed range: 1 to 1120 min⁻¹ Main drive with 2-stage gearbox: 45 / 37 kW Codpfjzagkhox Aiaegu Tailstock: Quill diameter: 140 mm Quill stroke: 300 mm Internal taper: MK 6 Dimensions and weight Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Indexing device for main spindle Milling attachment Brio BF90, mount: SK50, drive power: 11 kW Turret with quick-change tool holder Heidenhain linear scale in the X-axis Chip conveyor Many tools, including tool holders, supports, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and other accessories – see photos.

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. total power requirement --- kW Codpfeycxibjx Aiajgu weight of the machine ca. 6,1 t

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Weiler E30 Precision Lathe Cgsdpfsy Uzgbox Aiasu Manufacturer: Weiler Type: E30 Year of Manufacture: 2018 Condition: Used, operational, ready for demonstration Operating Hours: 8,500 hours Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - 3-jaw chuck - 8-position tool turret

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Csdpoy Uzc Nefx Aiaogu Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated Cgedpfoy Ulqwex Aiaeu >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Center height: 214 mm turning diameter over face support : 200 mm Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Cjdpjq Hd Ipofx Aiajgu Machine is sold at a fixed price.