Used Weinig Em 4 Feed Unit For Planing Machines for sale (1,13,155)

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Kdedpfjzvvuasx Ab Her Includes 5 planing heads.

Condition: good (used), Weinig EM 11 Kjdpszcnt Aefx Ab Hedr

Condition: good (used), Weinig EM 4 Kdedpfx Aozcnwueb Her

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove Kdodpfjyatffsx Ab Her and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, 4-roll feed unit Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Kdsdpfx Abozuz N Ho Hor Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Kdjdozuzfbspfx Ab Hjr Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Technical specifications: Number of rollers: 4 Number of speeds: 4 Motor power: 0.75 kW Feed rates: 3-23 m/min Roller size: 120x50 mm Power supply: 380 V Kedpfx Ajzvm S Aob Hodr

Condition: new, Technical specifications: Number of rollers: 6 Kdedpfszvm Sisx Ab Her Roller size: 120x60 mm Maximum feed: 20 mm Number of speeds: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min Distance between rollers: 133-154-133-133-133 mm Distance between the first and last roller: 686 mm Motor speed: 1400/2800 rpm Motor power: 0.75 kW

Condition: new, Technical specifications: Number of rollers: 4 Roller size: 120 x 60 mm Number of speeds: 4 Feed speed: 4-8-11-22 m/min Max. stroke: 20 mm Distance between rollers: 133-143-145 mm Distance between the first and last roller: 421 mm Motor power: 0.75 kW Kedpozvm Rrefx Ab Hedr Motor speed: 1400/2800 rpm.

Condition: used, Technical specifications: Number of rollers: 3 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of speeds: 8 Distance between the first and last roller: 286 mm Kdjdpfszvm Rfox Ab Her Distance between rollers: 133-153 mm Motor power: 0.75 kW Motor speed: 1400/2800 rpm Feed rate: 2-4-5.5-6.5-11-13-16.5-33 m/min.

Condition: used, Weinig Unimat 23 SP automatic planing and splitting machine for the precise planing (or pre-planing) and splitting of solid timber in a single operation. The machine delivers a high standard of finish and is ideal for efficient mass production in the timber industry. Kdjdpozrxywefx Ab Hjr Technical data: - Spindles: 4 - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, Heavy-duty 4-sided planer for processing large-format laminated beams and solid wood sections. Kdedpfszp U Huox Ab Hsr Technical data: Manufacturer: Kupfermühle Type: DOMA-B Year of manufacture: 1975 Machine number: 10026 Working width: up to 1,350 mm Working height: up to 300 mm Reinforced motors on the vertical spindles Planer heads with adjustable chamfer knives Left vertical spindle electrically adjustable Electric height adjustment Modernized machine control Driven, ribbed infeed roller Scope of delivery: All extraction pipes including collection manifold Four mechanically height-adjustable roller conveyors Inspection and trial run possible by appointment.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Kodpfxou Tln Nj Ab Hedr Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Planing width 250 mm Planing height 120 mm 1. lower spindle 2. right spindle 3. left spindle 4. right spindle 5. upper spindle 6. lower spindle Kodpewlk E Isfx Ab Hodr 7. lower spindle 8. Universal spindle 360* - Hydraulic feed 6-60 m/min. - 10x driven table rollers - Spindle diameter 50 mm

Condition: used, Technical specifications: Number of rollers: 3 Number of speeds: 4 Kdodszikpfjpfx Ab Her Motor power: 0.75 kW Feed speeds: 3-23 m/min Roller size: 120x50 mm Power supply: 380 V

Condition: used, Technical specifications: Kjdjziadlspfx Ab Hodr Number of rollers: 4 Motor power: 0.75 kW Continuously variable feed rate: 3-18 m/min Roller size: 120x60 mm Power supply: 380 V

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder Kedpfx Ajvxd Ttob Hodr 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: good (used), functionality: fully functional, 4-roller feed unit STEFF 2048 automatic arm Specification: • Condition – used, after inspection • Manufacturer – STEFF • Model – 2048 • 4 new feed rollers, size 120x60 • Forward/reverse rotation • Speed control by switch and gears • Motor powered by 380V (3-phase) electricity Kedpfexxbh Rjx Ab Hodr • 8 working speeds ranging from 2.0 to 33.0 m/min • Automated height and feed position adjustment (electric motors) • Weight approx. 70 kg Additional information: • Good technical condition • The attached photos show the actual state of the item for sale • Possibility to turn on and test the device on site

Condition: ready for operation (used), functionality: fully functional, Gang drilling machine with 4 units, gear transmission, and feed. One unit equipped with a thread cutting device. Tool holder MK 4. Kedpfex S U Uysx Ab Hsdr

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 New: No Not tested. Kdjdpfx Asypctqjb Hor No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Kdjdpfx Aozuzdqsb Hjr Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, WEINIG UNITEC 10 tenoning and slotting machine from a UC-Matic window production line, not in working order. Kjdpfoztv Axsx Ab Hedr Technical data: - Year of manufacture: 1997

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR Kedpfx Ajin Nrgob Hodr TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm Kdedpfx Abjw E I Ruj Hor - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom Kodexavtqjpfx Ab Hjdr 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach