Used Wmw C Frame Hydraulic for sale (67,432)

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Duodpfjig Hzksx Acpsw The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Dusdpfxjzk Amre Acpow Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: new, Year of construction: 2025, C FRAME SINGLE ACTING HYDRAULIC PRESS MODEL CFSS100 /100 TON Ram Cylinder Capacity (Ton) 100 Ton / 250 Bar Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø220mm * 1 Pc Auxilary Cylinder Diameter Ø 50*35 mm * 2 Pcs Table size (mm) 800x500 mm Stroke (mm) 400mm Dsdpfowbtihjx Acpouw Daylight (mm) 500mm Advance Speed (mm/sec) 110 mm/sec Return Speed (mm/sec) 160 mm/sec Working Speed (mm/sec) 10 mm/sec Motor (Kw) 11 KW Pump (liters) 26 liters / 19 CC Overall Dimension (LxWxH) 1900x1700x2930mm Weight (Kg) 5,500 KG

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top Dedpfxjdzp Trs Acpjuw - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Duedpfx Acoyr Ek Ropow Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Dujdpfxoyr D R Nj Acpsw Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Dsdpsyrr Rkjfx Acpsuw Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm Duodpsy Sx Uwofx Acpsw ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Maximum working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Djdpowyplcjfx Acpjuw Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Duedpfxsyz Dxas Acpow

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded Duodpfoh Uhqysx Acpew - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press, HYDRAP, type HPSK 25 Serial No. 6312, Year of manufacture 1989 Clamping force: 25 tons Ram stroke: 500 mm Reach: 300 mm Installation height: 700 mm Table surface: 1000 x 500 mm Table bore: Ø 210 mm Ram surface: 400 x 360 mm Dowel pin bore: Ø 40 mm Table height above floor: 855 mm Rapid traverse speed: 280 mm/sec Press speed: 3.5 mm/sec to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Dsdpfshrakvsx Acpeuw Power supply: 400 volts, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control unit - Measuring system for stroke adjustment - Press speed adjustable in infinitely variable steps via potentiometer - Pressure setting adjustable in infinitely variable steps manually via pressure regulator - Short-stroke device - Mechanical tool clamping on the ram with T-slots and dowel pin bore - Control cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control unit designed for electrical tool monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H: 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm Dujdpfx Aefcw Apscpsw depth 1500mm

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Dedpfx Ajcmat Uecpouw the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Dodpfxezbyxns Acpjuw

Condition: used, Technical details: Dodpfou N Dz Ajx Acpouw table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Dujdpevvkmbsfx Acpsw

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Duedpfezd Rhksx Acpow Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Dsdpog U Uv Refx Acpsuw Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Dusdpfx Ajd Hx Uqscpew Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Dedpfju D Dhxex Acpjuw Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dodpfsxmr Rxjx Acpouw Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Dedpfx Acozdkbkjpjuw Type Hydromat. Also ideal as a spare parts machine.

Condition: used, Year of construction: 1982, pressure 40 t Dodpfxetqqq Ro Acpjuw distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Dsdpfx Acoltrmuspsuw Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition