Used Coordinate Boring Machine for sale (83,878)

Condition: used, functionality: unexamined, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown - extensive documentation. For further information, see attachments. Tedpfx Acjxyq Hxj Njf The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Tjdpfjur H Ehox Ac Njf Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Todpfxsvzrx No Ac Nef Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Henri Hauser M5 DR jig boring machine spindle diameter 90 mm Tjdpfsg Ibuxox Ac Nof x-travel 700 mm y-travel 500 mm Drilling capacity in steel 40 mm spindle mounting MK 4 drilling spindle stroke 170 mm number of spindle revolutions 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimension - longitudinal 900 mm Table dimension - crosswise 770 mm Vertical travel of cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Clearance between uprights 900 mm Passage between spindle and table 815 Spindle motor 4.0 HP Total power requirement 380 V Machine weight approx. 3.9 t Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm Tedpfx Acju Aqz Aj Nsf - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: excellent (used), Year of construction: 1988, operating hours: 1,000 h, functionality: limited functionality, machine/vehicle number: 99223, overall weight: 2,800 kg, Grinding Dia: min=0.8 to max 250 mm; Vertical stoke : 90 mm; Max. travel of the grinding head :300 mm Table size :320x600 mm; Max stroke of the table Tranversal 250 mm, Longitudinal 400 mm; Electric motor speed 80000 rpm, Pneumatic 180000 rpm. Dimensions 1585x1260x2665 mm, Weight: 2800 kg Tjdpfjxvccdjx Ac Nef

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1193, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,549 kg, repeat accuracy: 0.003 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 16/01/2026! TECHNICAL DETAILS Maximum permissible workpiece weight: 25,000 N Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,000 mm Measuring resolution: 0.001 mm Straightness of guideways Straightness X-axis max.: 0.010 mm Straightness Y-axis max.: 0.010 mm Straightness Z-axis max.: 0.010 mm Repeatability: 0.003 mm Travel speed: stepless, 4.2 m/min MACHINE DETAILS Dimensions & weight Tjdjxy Rtrepfx Ac Nef Space requirement (L x W x H): 3,600 x 3,600 x 4,500 mm External dimensions (L x W x H): 2,590 x 2,280 x 4,080 mm Machine weight: 8.5 t

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1156810C, Mitutoyo BRT-A910 CMM (1998) Todpfx Aox Ap Ndoc Nef Renishaw Probe CMM Software not included in scope of supply. Sub Location Building 6

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, Mitsubishi Floor Borer MAF 200/135 Year 1974 Fully Operational X Axis 10,000 mm Y Axis 3000 mm Z Axis 600 mm W axis 1,000mm Spindle diameter 200 mm Tjdpfx Aexmr Auec Nsf Borer Diameter 135mm Max. spindle speed 810 rpm Spindle motor power 37 kW Table length 1,600 mm Table width 2,100 mm Table Load 15,000 kg Length x width x height (1750.0 × 2667.0 × 300.0) Weight 55,000 kg Immediate Delivery

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Tjdpfx Ajxy Tg Ioc Njf Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical data: Tjdpsxzglgefx Ac Nsf - Incl. coupling and drive unit - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically Tjdpewka Hfsfx Ac Nef - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) Tjdsx Aqi Eopfx Ac Njf N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: SIEMENS 840D Solution Line (electrical overhaul in 2017) X-travel: 7,000 mm Y-travel: 2,100 mm Z-travel: 1,500 mm Z-travel (spindle in vertical position): 1,200 mm Feed rate X, Y, and Z axes: 2–12,000 mm/min Rapid traverse speed X, Y, and Z axes: 12,000 mm/min Tedpsxz Ecqsfx Ac Nef Universal milling head UFKSpindle speeds: 22 - 2,400 rpm Drive power 100 / 60 ED: 31.5 / 39 kW Max. torque main spindle: 2,200 Nm Swivel range of milling head (C axis): 180° Swivel range of milling head (A axis): 340° PREISELER AWU 650 automatic reversible clamping device Year of manufacture: 1995 with FORKARDT F630 vertical three-jaw chuck: 630 mm Center height above plate: 500 mm Max. workpiece weight (clamped in flight): 2,000 kg Max. workpiece weight (with counter bearing): 4,000 kg Counter bearing with hydraulic quill Tailstock quill taper: MK6 Tailstock center height: 500 mm Clamping plate Dimensions (LxWxH): 6,000 x 1,500 x 300 mm Max. load: 90 t T-slots: 6 pieces 28H7 (DIN650) T-slot spacing: 250 mm Coolant system with paper belt filter Manufacturer: ALLWEILER AG Type: PF 60 DVS / 500 Pump capacity at max. 3 bar: 40 l/min With recirculation unit Equipped with Automatic turning clamp with worm gear: PEISLER AWU650 Various roller blocks and supports6 UK500 machine clamping tablesMAYFRAN TYPE MT10 hinged belt conveyor SIEMENS SINUMERIK HT2 electronic handwheel Milling head design with hydromechanical rapid tool clamping Direct contactless measurement via linear measuring systems Oil circulation lubrication for main gearbox and milling head drive Work platform traveling in X direction, protective cover with viewing windows The machine is in exceptionally good condition and can be viewed under power. In 2017, a new SIEMENS 840D Solution Line control system was installed, and all drive motors and the control cabinet were replaced.

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Tedpfx Asu S Rnljc Njf Repeatability ±10 μm* Accessories

Condition: used, Price: On request - Documentation available: No - CE certificate present: No - Control: Conventional - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Tedpfx Acowfpbbo Nsf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) Todpsun Siwefx Ac Nof - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Extras: Includes various tool holders, rotating table, user manuals

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Tsdpfew E Tz Eox Ac Nof Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: ready for operation (used), Union boring mill BFK 130/1 x-axis 3500 mm y-axis 2000 mm z-axis 1250 mm table surface area 1600 x 2000 mm movable table load 12.5 t tool taper SK50 Angle heads 0° - 180° Tsdpfx Acjxx Ny Ue Njf Weight approx. 35 t Milling heads Face plate

Condition: excellent (used), Year of construction: 2019, 3D coordinate measuring machine Control unit XM 1600 Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Todoxrhayjpfx Ac Njf Accuracy: +/- 7µm Repeatability: +/- 3µm

Condition: used, Year of construction: 1984, functionality: unexamined, machine/vehicle number: B30157, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, table length: 600 mm, table width: 380 mm, table load: 300 kg, spindle mount: MK 3, total height: 2,545 mm, total length: 1,700 mm, table height: 965 mm, total width: 1,330 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 900 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 2,500 rpm, drilling capacity: 30 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 85 mm, spindle diameter: 100 mm, spindle motor power: 8,200 W, workpiece weight (max.): 300 kg, rotary table diameter: 200 mm, Additional specs: Resolution: 0,001mm Max. capacity of boring: 220mm Machine weight: 2500kg Additional equipment: Tjdpfx Aceungrge Nof - One rotating table with two rotating axis. - Collets, clamping elements miscellaneous, tool holders. - Documentation for machine

Condition: excellent (used), Year of construction: 1994, 3D coordinate measuring machine Tedpfx Acotqcygs Nof Measuring range X/Y/Z 1000/660/460 mm Measurement uncertainty 3.5 + 4L/1000 μm Table load 800 kg Renishaw swivel head Granite plate 1500 x 900mm, Z-axis approx. 600mm Measuring software: Tutor with PC

Condition: used, Year of construction: 1968, functionality: unexamined, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Tsdpfx Aceunhd Ro Nsf Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Year of construction: 1996, condition: good (used), Control UCC lite-2 Measuring range 700 x 450 x 350 mm Todpfod Stn Tjx Ac Nef Measuring heads (MH20i, PH1, PH6) Various touch probes

Condition: used, Year of construction: 1981, functionality: unexamined, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs Tsdpfx Aceunrhas Nof - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine