Used Wmw Zeulenroda Hydraulikpresse for sale (1,122)

Condition: used, functionality: fully functional, Heavy-duty industrial hydraulic press from Zeulenroda (Thuringia) – sought after by collectors and mechanical engineers for its robustness and precision. Solid East German (GDR) industrial design, heavy cast iron frame, hydraulic main cylinder, tool holder for pressing, bending, and straightening operations. Suitable for locksmiths, blacksmiths, repair shops, warehouse construction, and restoration. Also suitable for special pressing tasks (bearing pressing in/out, bending devices, press dies). Bwedpfx Apszab Axeaen Technical specifications: - Manufacturer: WMW Zeulenroda (GDR trademark on the machine) - Design: hydraulic stationary press - Drive: three-phase 400 V (hydraulic pump) - Construction: heavy cast iron frame, press bed with table - Tools: dovetail jaws and pressure blocks (see photo) - Weight: approx. 500-1,000 kg (check before collection) - Year of construction: approx. 1970s-1980s (GDR era) Collection / Transport: Self-collection with forklift / crane. Loading on-site possible. Shipping by forwarding agent on a pallet / low-bed trailer by arrangement.

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Bwodpeu Nfuqjfx Apaen Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa Bwjdpfxsxna Uze Apasn total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Bodpsw Smuksfx Apaown Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: Bsdpfx Apevc Awxjaswn pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm Bwedou Nfudjpfx Apaen ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s Bodjvc Ax Nepfx Apaown ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Bwsdpfxoza An No Apajn Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Bwsdpjwp Nv Hefx Apaen Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Bwodpfx Aoy H Icajpaon Weight 1.3 tons Clamping table changed! Not an original table!

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm Bedpsu Nfvbjfx Apaewn passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s Bodpfx Aeu Nfv Uopajwn mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S Bjdpfeu Nfvujx Apaewn ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Bedjw D Awmjpfx Apajwn dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm Bwjdpeu Nfwlefx Apaon passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Bwedetzwxdjpfx Apaen Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Bwjdpsqy E I Rjfx Apasn

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Bedpfx Apjygtzyjaewn

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, power: 12.5 kW (17.00 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,400 kg, distance between stands: 800 mm, PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Bwedpjtzxvwofx Apajn Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. Bjdpfxewbt Uqj Apaswn The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Bedpfxevcb Tlo Apaewn

Condition: not inspected (used), machine/vehicle number: 068-071/270, functionality: unexamined, stroke length: 280 mm, table width: 280 mm, table length: 280 mm, throat depth: 150 mm, distance table to ram: 355 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Bodpfx Ajwvh R Aspaewn Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Used condition as shown in the pictures Bwodpfx Apow S Uccsaen All data can be found in the photo of the nameplate.

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. Bwedpfx Asy A Nglspaon The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Bjdpfxjw U A Rmj Apajwn Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.